Kenmore Dryer 110.67761600 (11067761600, 110 67761600) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 279782
Dryer won't start but has power and timer works? This belt switch kit stops the dryer when the belt breaks. Moderate DIY repair, 45-60 minutes.
Do-It-Yourself Stories from Customers like You
Broken belt switch Jack F. • Hermosa Beach , CA • July 08, 2016
Every time I tried to start our dryer, the "Sensing Light" came on, I heard a little "click," and the dryer would not start.
According to the very helpful Appliance Parts Pros. videos, I was able to dismantle, diagnose a few components, and discover the broken part. In this case, it was a Broken Belt Switch.
I ordered the part, we went on vacation for a week, and when we returned home the part was at our residence. The next day, I installed the part and all is good now.
I am nearly 70 years...
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP693995
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
Do-It-Yourself Stories from Customers like You
There was no power cord and accessories to attach it Terry C. • Martin , TN • December 27, 2016
I put all pieces that I ordered on the dryer and plugged it in.
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10109200
Secures baffles to the dryer drum interior. Replace worn, stripped, or missing screws to keep baffles firmly attached and prevent rattling during operation.
Do-It-Yourself Stories from Customers like You
Missing baffles Anna S. • Shoreview , MN • January 31, 2016
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681414
Replacement screw for washers. Used to secure various components including handles, panels, and internal parts. Order if original is missing or stripped.
Do-It-Yourself Stories from Customers like You
Dryer drum was beginning to stall occasionally Dana J E. • San Marcos , CA • March 17, 2015
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212450A
Stationary shelf that sits inside the dryer drum for drying shoes, sweaters, and delicates without tumbling. Replace if rack is missing, cracked, or damaged.
Do-It-Yourself Stories from Customers like You
Loud squeaking noise Karen H. • Crossville , TN • March 30, 2015
I went online and typed in my model number. I was just going to order the dryer belt, but decided that changing all the movable parts at the same time would be best - I definitely recommend doing this, since it was the tensioner pulley and not the belt. My husband is handy, which is why this was not a problem. The whole dryer needs to come apart in order to do this repair. At first I thought I received the wrong parts because I have a front load washer and dryer set, but the picture on the...
Read more
More
$68.38
- Compare At:
-
$80.69
- You Save:
-
$12.31
Genuine Whirlpool part
By: Whirlpool
Part Number: W10470674
Side or bottom exhaust vent kit for dryers. Relocates dryer vent from rear to side or bottom position. Includes metal duct, hardware, and instructions.
Do-It-Yourself Stories from Customers like You
Needed to switch dryer to side exhaust Allen B. • Clarksville , IA • January 23, 2015
Went on line looking on how to accomplish this and Appliance parts pro site came up and it was exactly what I needed. Order was sent on Sunday note and on Tuesday afternoon it was delivered.
Just got done installing. Took longer to gather up the needed tools then to install. The instructions were awesome . complete wife great photos
Read more
More
$67.69
- Compare At:
-
$80.55
- You Save:
-
$12.86
Genuine Whirlpool part
By: Whirlpool
Part Number: W11226088
Covers and protects your dryer's light bulb from heat and debris while diffusing illumination. Replace if cracked, yellowed, or missing. Confirm fit.
Do-It-Yourself Stories from Customers like You
The pulley wheel the light cover James B. • Philadelphia , PA • August 06, 2017
Been doing these repairs for a lil while now. Your Company provides Videos on Appliance Brands that detail how to get to the part that is suspected and how to Test and Repair. I suspected a Part by it's sound and followed the Video to get to the part and made the repair.
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387560
Right-hand door hinge for dryers. Replaces broken, bent, or sprung hinges that prevent the door from closing properly. Easy DIY installation.
Do-It-Yourself Stories from Customers like You
Deformed hinges Todd B. • Kalamazoo , MN • September 29, 2014
I removed the old hinges and replaced them with the new hinges. It was probably the easiest repair I've ever had to do.
Read more
More
$61.69
- Compare At:
-
$73.41
- You Save:
-
$11.72
Genuine Whirlpool part
By: Whirlpool
Part Number: WP660658
If your dryer motor has come loose or makes grinding noises, this motor clamp secures the drive motor. Simple DIY repair with basic tools in under an hour.
Do-It-Yourself Stories from Customers like You
Motor locked up and was buried in lint due to the felt seal failing and letting lint into the motor area. Steven O. • Shrewsbury , MA • February 06, 2022
Replaced the motor, blower, rear drum felt seal, and drive belt. Vacuumed up the lint everywhere, cleaned extra lint out of the chute, around the blower, and rear vents.
Read more
More
$10.37
- Compare At:
-
$12.44
- You Save:
-
$2.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387559
Left-side door hinge for dryers. Replaces broken, bent, or deformed hinges that prevent the door from closing properly. Simple installation.
Do-It-Yourself Stories from Customers like You
Deformed hinges Todd B. • Kalamazoo , MN • September 29, 2014
I removed the old hinges and replaced them with the new hinges. It was probably the easiest repair I've ever had to do.
Read more
More
$61.69
- Compare At:
-
$73.41
- You Save:
-
$11.72
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387911
Channels dryer exhaust to external vent connection. Replace if rusted, leaking, or screen is damaged to restore proper airflow and drying performance.
Do-It-Yourself Stories from Customers like You
The vent on the air duct assembly had become rusted Christy R. • Arlington , TX • August 04, 2015
My son and I took the back panel off the dryer and found that the dryer was full of lint. It was very dirty and probably explains why the dryer had no been working as well. We cleaned the dryer out, took off the old air duct assembly and replaced it with the new one. We also replaced the old dryer hose while we had it pulled out. The repair was very easy, simply a matter of unscrewing screws and then reattaching them. Based on how dirty the dryer was it is probably a good idea to check the...
Read more
More
$142.41
- Compare At:
-
$170.89
- You Save:
-
$28.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399640
Dryer won't heat or overheats on low settings? A faulty temperature selector switch prevents proper heat control. Easy DIY fix in 10-15 minutes.
Do-It-Yourself Stories from Customers like You
Temperature selector switch failed. Pierre N. • Winchester , VA • April 22, 2020
I replaced the Temperature Selector Switch with a new one ordered from AplpliancePartsPros.com
Read more
More
$57.56
- Compare At:
-
$67.92
- You Save:
-
$10.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP297092
Secures the door hinge in place for smooth opening and closing. Replace this small retaining clip if worn, broken, or missing to restore proper alignment.
Do-It-Yourself Stories from Customers like You
Dryer no start George Larry B. • Niceville , FL • November 19, 2019
Removed and replaced start switch then motor, no joy. removed the timer for disassembly, found bad contact. soldered contact to the spring tab and assembled and installed the timer. All good now.
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W11693756
Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Door switch on dryer. James A. • Middleburg , FL • January 20, 2020
It was very easy to fix after watching your video..
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Whirlpool part
By: Whirlpool
Part Number: W11222846
Dryer lint screen door provides access to the lint filter. Replace if cracked, broken, or won't close properly. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Broken parts Joao L. • Albertson , NY • February 16, 2020
Changed the old parts with the new ones.
Unscrewed one side. The other side was broken
Put the new parts together and screwed back into place
Done. Everything works
Read more
More
$90.58
- Compare At:
-
$106.88
- You Save:
-
$16.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066208
Secures the lint duct assembly inside your dryer to prevent rattling and keep items from reaching the blower wheel. Replace if bent, broken, or missing.
Do-It-Yourself Stories from Customers like You
Lint filter stuck. Neal D. • Hixson , TN • July 31, 2019
There's a metal piece that the lint filter pushes down into that got bent a bit I guess and ended up skewering the lint filter. I got it loose but couldn't get the metal piece to stay where it was supposed to be to operate without catching the lint filter. I think it's there to prevent things like socks from hitting the blower wheel. When the new part came in I had to take the front cover off the blower wheel. It was easier than I thought, just three bolts/screws. Don't bother taking off...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13