Curt September 04, 2017 for Model Number ATW4675YQ0 I need help on this particular machine for replacing the suspension rods kit. For some reason that I have yet to figure out, the top will not come off or tilt back to get to the rod bushings on the top below the lid I know the lid has to come off or tilt back, have not been able to get it to release. All help will be appreciated. Thank you for your help. Curt
1 Answer Hello Curt. There is 2 screws in the hinges on the back. Only remove the top screw on each side. Leave the lower one. Then pull the top forward and lift to raise the top of the unit. Thanks. Read More...
James E August 25, 2017 for Model Number NTW4700YQ1 Part number and price for suspension rod and spring kit for NTW4700YQ1
Madeline August 05, 2017 for Model Number WTW8200YW0 What the suspension kit part number for a wHirl pool washer WTW8200YW0
1 Answer Madeline, The part number for the suspension rods on this unit will be W10440786. Read More...
Johnny P July 12, 2017 for Model Number WTW5000DW1 What is the part number for the complete suspension kit (rods, springs, bushings etc) for a Whirlpool model WTW5000DW1.
Andrea M May 15, 2017 for Model Number 7MWTW1715BM0 Hi! I would like to know what is the part number for a suspension kit for my washer model 7MWTW1715BM0. Thank you! I need a part number for a suspension kit, springs, rods.
Tim March 01, 2017 for Model Number RTW4640YQ1 I need a part number for a suspension kit, springs, rods.
Patricia L. December 04, 2016 for Model Number mvwc200xw1 The other day my washer got off balance and was shaking and banging really bad when I opened it one corner of the tub had fell down. With further investigation my husband found one of the suspension rods had came out. He put it back and checked the rest and they all seemed fine. We did find that the ring around the top of the tub had a piece broken out of it toward the back. It gets off balance and shakes pretty bad during the spin cycle not every load but quite often now.
1 Answer Hello Patricia, The broken part is most likely the tub ring WPW10215107. You will need to replace all four suspension rods W10780048 since they will not be dependable since one has come out. Read More...
Lindsay October 05, 2016 for Model Number NTW4630YQ0 I need to replace the suspension on my washer (NTW4630YQ0) your website says the part isn't available, where can I get new suspensions for my washer?
1 Answer Lindsay, The individual suspension rods and bushing and ball joints have been replaced by a kit, W10780048 / W10780048 Suspension. The "kit" contains all four(4) suspension rods, ball joints and bushings. The part is in stock and available at this time. Thanks, Read More...
D. S. September 23, 2016 for Model Number WTW4880AW0 Washer quit working last night. we had a blanket and sheets in at the time and still a water and did not go to spin.The blanket seemed to be stuck around the agitator. We pulled it out and tried to start, lid locked and the washer made a clicking sound instead of spinning freely to check the auto level feature. The motor did spin but sounded like it was under strain, it was empty that time. The drum seems to be flopping around also. Can I get parts or is it time for new? Thanks for your help.
1 Answer Hello D.S. It sounds like you damaged the gear case W11454741 on the unit. You will want to also check the suspension rods and also check the belt. Read More...
Bob October 19, 2015 Have Amana Mopdekl NTW4650yQ0, Drum is off balance, took apart and see part number AP5306956 , which the suspension rods attache to at top of drum has broke. Tried to order and it says part is no longer available. do you know of another option, hate to throw away machine due to a cheep plastic part that can not replace.