Dishwasher Control Panel Lcd Parts

The Dishwasher Control Board is an OEM part for Frigidaire dishwashers. It is the central component responsible for operating and controlling all functions of the dishwasher. 

Causes of a bad control board can include moisture damage, short circuits, or normal aging of electronic parts over time. 

Symptoms of a bad control board include:

• The dishwasher not starting or functioning properly
• Lights flashing in unintended patterns  
• Inability to select desired wash cycles
• Issues with dispensing detergent or rinse aid

This OEM Frigidaire replacement control board provides genuine functionality and performance. It is also compatible with some Electrolux, Gibson, and Kenmore dishwashers.

The Electronic Control Board is an OEM part for Whirlpool dishwashers. It manages and regulates the dishwasher's various functions, including the wash cycles, water temperature, and timing.

You should replace the electronic control board if it becomes faulty. Causes of a bad control board can include electrical surges, moisture damage, or wear and tear over time. These factors can lead to malfunctioning or failure of the control board, impacting the dishwasher's performance.

Symptoms of a bad electronic control board include:

• Dishwasher not starting or stopping mid-cycle
• Inconsistent wash cycles
• Error codes displayed on the control panel
• Failure to properly heat water or drain

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Configured Service Machine Control Board is an OEM replacement part for GE dishwashers. It serves as the central control unit, managing and regulating various operations and functions of the dishwasher.

Symptoms of a failing dishwasher service machine control board include:

• The dishwasher not powering on or responding to any input commands
• Incomplete or interrupted wash cycles
• Indicator lights or displays malfunctioning or displaying error codes
• Specific components like the water inlet valve or drain pump not functioning properly

Causes of a bad service machine control board can include electrical malfunctions, power surges or electrical spikes, physical damage from impact or moisture intrusion, or simply wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Control Board is an OEM part for Whirlpool dishwashers. It serves as the brain of the appliance, controlling and regulating all functions and cycles of the dishwasher.

Causes of a bad Control Board can range from power surges or electrical issues that damage the board's components, to physical damage from moisture exposure or impact, as well as general wear and tear over time.

Symptoms of a faulty dishwasher Control Board include:

• The dishwasher not turning on or starting cycles
• Certain wash cycles or options not functioning correctly
• Error codes or indicator lights displaying on the control panel
• The dishwasher shutting off unexpectedly during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This dishwasher main control board kit is the central circuit board that directs all wash functions. Replacing a failed board restores proper power distribution and timing so cycles start, advance, and finish correctly, helping prevent intermittent shutdowns and erratic operation. What it does:

• Controls cycle timing and communicates with sensors
• Distributes power to the wash motor, drain pump, inlet valve, and heater
• Works with the door latch and user interface to start/stop the cycle
• Failure may cause no power/won't start, stalled cycles, blinking lights/error codes, or incorrect filling, draining, or heating

• One main control board kit

• Disconnect power at the circuit breaker; turn off water if moving the dishwasher for access
• Board is typically in a housing beneath the unit—use ESD precautions and keep connections dry
• Photograph/label wire harnesses; transfer connectors one at a time to the new board
• Restore power and run a test or rinse cycle to proper operation

The Noise Filter Assembly is an OEM part for LG dishwashers. It is designed to reduce electrical noise and interference that can affect the dishwasher's operation. The noise filter helps ensure that the electronic components function smoothly and without disruption, contributing to the overall efficiency and reliability of the appliance.

Causes of a bad noise filter assembly can include electrical surges, wear and tear over time, or damage due to moisture or physical impact.  

Symptoms of a bad noise filter assembly include:

• The dishwasher not starting or stopping unexpectedly
• Error codes related to electrical issues
• Intermittent power loss during a cycle
• Unusual noises coming from the control panel area

This OEM LG part is also compatible with some Kenmore models.

This console cover replaces the front control panel fascia on the dishwasher. It restores a clean, readable control surface so you can select cycles and options reliably.

• Houses and labels the control buttons for cycle selection
• Protects internal control components from moisture and everyday use
• Wear, cracks, peeling graphics, or unresponsive/erratic button areas indicate replacement
• Cosmetic damage or faded markings can make controls hard to read

• Disconnect power before service
• Open the door and remove screws securing the console; transfer any switches or keypad ribbon as directed
• Handle the ribbon cable and connectors carefully to avoid damage
• Verify proper alignment and secure all fasteners before restoring power

The Main Control Board Kit is an OEM part for GE dishwashers. This electronic control board manages various dishwasher functions, including water intake, temperature settings, wash cycles, and drying times. It's the brain behind the efficient operation of your dishwasher, ensuring that all components work in harmony for optimal cleaning results.

The primary causes of control board failure often involve power surges, moisture damage, or component wear and tear, which can disrupt the electrical pathways and circuits within the board.  

Symptoms of a bad Main Control Board include:

• Dishwasher failing to start or stopping mid-cycle
• Unusual error codes displayed on the dishwasher panel
• Non-responsive controls or settings that don’t change appropriately

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This middle spray arm hub secures the dishwasher's middle spray arm to the feed tube and lets it spin smoothly, helping deliver even spray coverage so dishes in the upper rack area get properly cleaned.

• Connects the middle spray arm to the water feed/manifold and serves as its rotating center
• Keeps the arm aligned so jets can distribute water evenly
• Wear or cracks can cause the arm to wobble, fall off, bind, or stop spinning
• Symptoms include poor cleaning on the upper rack and unusual noise from the arm area

• Disconnect power and water supply before servicing
• Remove the middle spray arm per your model's design and note its orientation
• Transfer and reuse any original screws, clips, or washers; install the new hub without overtightening
• Spin the arm by hand to ensure free movement before running a brief test cycle

This dishwasher control module assembly is the appliance's electronic brain, directing cycle timing and power to the motor, pumps, water valve, and heater. Replace it to restore proper operation when cycles won't start, advance, or the controls are unresponsive.

• Manages cycle timing and coordinates wash, rinse, drain, and dry operations
• Distributes power to key components based on inputs from the user interface and sensors
• Helps resolve issues such as no start/no response, cycles that won't advance or complete, or recurring error codes/beeping
• Restores consistent control of wash performance and cycle sequencing

• Disconnect power at the breaker or unplug the dishwasher before servicing
• Handle the board by the edges and use ESD precautions; avoid touching components
• Move wiring harnesses over one connector at a time to match positions on the new module
• After installation, restore power and run a test/service cycle or control reset per your model's tech sheet

This dishwasher user interface mounts behind the door console and translates button presses into commands for the main control. Replacing a failed UI restores responsive keys, cycle selection, and indicator lights when the panel stops responding or behaves intermittently.

• Registers button selections and controls indicator LEDs on the console
• Sends inputs to the electronic control to start and manage wash cycles
• Helps resolve unresponsive or intermittent buttons and non-illuminating status lights
• Common symptoms include no panel response, won't start when Start is pressed, or random/erratic panel behavior

• Disconnect power at the breaker before servicing
• Remove inner-door/console screws to access the interface
• Use ESD precautions; seat ribbon/plug connectors fully and route wiring to avoid pinching
• Transfer any re-usable mounting clips as needed, reassemble, and test operation

Color: Stainless

The Console Assembly is an OEM part for Frigidaire dishwashers. It includes the control panel and its housing, allowing users to select and monitor different wash cycles and settings. This assembly is integral to the operation of the dishwasher, providing both functionality and a user-friendly interface.

Replace the console assembly if it becomes damaged or malfunctioning due to wear and tear, exposure to moisture, or electrical issues. 

Symptoms of a bad console assembly include:

• Unresponsive or erratic buttons
• The display not lighting up or showing incorrect information
• Difficulty in selecting or changing wash cycles
• Cracks, discoloration, or other physical damage to the panel

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This keypad is the touch-sensitive switch assembly behind the dishwasher's control panel. It enables cycle and option selection; when it fails, buttons can become unresponsive or behave erratically, preventing normal operation.

• Mounts behind the control panel and sends button-press signals to the control board
• Helps restore proper cycle selection and start/stop functions
• Common symptoms include unresponsive buttons, intermittent or stuck keys, random beeps/lights, or needing to press very hard
• Connects via a flat ribbon cable to the electronic control

• Disconnect power at the breaker before servicing
• Access is typically from the inner door; remove console/inner panel screws to reach the keypad
• Handle the ribbon cable carefully—do not crease; ensure the connector is fully seated and oriented correctly
• Reassemble the console and test keypad functions before closing up completely

This phase control board is the power module that drives designated surface elements on compatible cooktops. It regulates power and communicates with the main control to deliver steady heat, restoring proper heating performance when the original module fails. What it does:

• Regulates and supplies power to assigned surface heating zones
• Communicates with the main/user interface control to execute heat settings
• Helps monitor fault conditions to protect the circuit
• Typical symptoms: one or more surface elements won't heat, intermittent heating, or the unit powers on but doesn't heat those zones

• One electronic control board

• Disconnect power at the breaker before servicing
• Use ESD protection; avoid touching component leads and solder joints
• On models with multiple phase boards, confirm the correct board position for your unit
• Label and transfer all connectors; secure the board per the service manual and test each surface element after reassembly

This is the front console/control panel assembly for select laundry units. It provides the user-facing buttons and display area that houses and protects the controls, restoring a clean look and proper access to cycle selections.

• Houses the user interface and control selector areas on the appliance front
• Replaces a cracked, loose, or discolored console panel
• Helps resolve issues like broken mounting tabs, missing buttons, or difficulty operating controls
• Cosmetic damage or wear to the control area

• Disconnect power before servicing to avoid electrical shock
• Use care to transfer any existing electronics, knobs, or overlays if required by your model
• Keep track of screws and clips; support the panel to prevent cracking during removal/installation
• Verify proper alignment of harness openings and mounting points before tightening fasteners