Dryer Obstructed Lid Switch Door Lock Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406107
The Dryer Door Switch is an OEM replacement part for Whirlpool dryers. It is a crucial safety component that monitors the opening and closing of the dryer door, preventing the dryer from operating when the door is open.
Symptoms of a faulty Dryer Door Switch include:
- The dryer failing to start or operate with the door closed
- The dryer continuing to run or heat even when the door is open
- Error codes or warning lights related to the door switch sensor
Causes of a bad door switch can include normal wear and tear over time, physical damage from mishandling or impact, or electrical malfunctions.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
-
Will not tumble
See more...
Do-It-Yourself Stories from Customers like You
Ignitor coil was not turning on Harrison N. • El Cajon , CA • March 14, 2021
I realized my load of laundry was still wet after a normal drying cycle. My first action was to turn the dryer on (2010 gas Maytag centennial) and open the front port to look at the ignitor coil. It never turned orange so I knew there must be a problem with the primary circuit. I shut off the dryer, disconnected the power, pulled it away from the wall, shutoff the gas, and removed the back panel. I then disconnected the wires for the thermal fuse and checked its resistance with a multimeter....
Read more
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Lg part
By: Lg
Part Number: MCK49049101
The Lint Screen Housing is an OEM replacement part for LG dryers. It serves as the enclosure that holds the lint screen or filter, which plays a crucial role in capturing lint and preventing it from accumulating inside the dryer. This housing measures approximately 17 in x 12 in,
Symptoms of needing to replace the lint screen housing include:
- Difficulty in removing or inserting the lint screen
- Visible cracks, warping, or damage to the existing housing
- Lint buildup or leakage around the housing area
- The housing becoming loose or not securely holding the lint screen in place
Causes of a faulty lint screen housing can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or mishandling.
This OEM LG part is also compatible with Sears/Kenmore dryer models, ensuring a perfect fit and reliable lint filtration for your specific appliance. NOTE: Due to a manufacturing change, this filter housing may be different from your original. If you have any issues installing your filter, you may need to order new filter part# ADQ56656403 and new guide part# MEA49050001 for a proper fit. When ordering [AP5071745} you will need to order filter ADQ56656403.
Do-It-Yourself Stories from Customers like You
Kenmore elite steam dryer lint filter was catching twisting and ripping clothes Meghan R. • Everett , WA • March 05, 2016
I replaced the warped cover guide and the lint filter. Now it works perfect! Sears was going to charge $100 just to diagnose the well known problem, not including parts and labor. It only requires 4 screws(i used the old ones). Easy fix.
Read more
More
$43.95
- Compare At:
-
$51.86
- You Save:
-
$7.91
Genuine Whirlpool part
By: Whirlpool
Part Number: 279570
The Door Latch Kit is an OEM replacement part for Whirlpool washers. This component is responsible for securely locking the washer door during the wash cycle, preventing it from opening unexpectedly and ensuring a safe and efficient operation.
Symptoms of needing to replace the door latch kit include:
- Difficulty in closing or latching the washer door
- Door opening unexpectedly during the wash cycle
- Leaks or water seeping due to an improper door seal
- Excessive wear or damage to the latch components
Causes of a faulty door latch kit can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the door alignment or strike plate.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.
This part fixes the following symptoms
-
Door won't close
-
Shuts off too soon
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer door latch worn out Kathy M. • San Diego , CA • February 22, 2015
When I looked up the part number there was a handy video that popped up. I watched the video and thought "how easy!" so, I ordered that part and waited. The next day, I thought I better start to take the door off of my dryer (because that's what the video instructed, and I wanted a head start) so as I was going into the garage to get my tools, my son came in with a small package. It was the part. That came, to quote another customer, "Crazy Fast!" All the way from Kentucky to California! ...
Read more
More
$6.95
- Compare At:
-
$13.85
- You Save:
-
$6.90
Genuine Whirlpool part
By: Whirlpool
Part Number: W11307244
The lid lock is an OEM replacement part for Whirlpool washers. It is designed to keep the door securely closed during operation.
Symptoms of a faulty lid lock:
- Washer will not start
- Washer stopping randomly during operation
- Lid will not lock
By replacing the latch, you can restore door closure and prevent interruptions in your washer's operation. Improve your washer's safety and efficiency with this durable Lid Lock Assembly.
This latch can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Please note: The part might arrive in the locked position. Install the lid lock and power up your washing machine to reset the lock to the open position.
Do-It-Yourself Stories from Customers like You
The washer would not go into spin mode only partial wash and drain Karen T. • Dearborn Heights , MI • August 11, 2017
The part is so new no video so I went onto a similar part and watched video that got me about 80%. Then, called and customer service sent me a service Manual but this still was not specific so I broke the old to get it out and in the process figured out how to do it correctly. So I installed the last bit of it which was the bezel through the machine top by myself correctly. So you take the old one out by pushing out to the right from the bottom side using a screw driver for leverage. It will...
Read more
More
$97.50
- Compare At:
-
$115.05
- You Save:
-
$17.55
Genuine Ge part
By: Ge
Part Number: WE4M416
The Dryer Push-to-Start Switch is an OEM replacement part for GE dryers. This component is responsible for initiating the drying cycle when pressed, serving as the primary control for starting the dryer's operation.
Symptoms of needing to replace the push-to-start switch include:
- The dryer failing to start or begin the cycle when the switch is pressed
- Intermittent or inconsistent starting issues
- Visible damage or deterioration of the switch itself
Causes of a faulty push-to-start switch can include mechanical wear and tear over time, electrical malfunctions, or physical damage due to impact or mishandling.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryer models.
Do-It-Yourself Stories from Customers like You
Push start switch on ge dryer Michael S. • Carlsbad , CA • February 26, 2017
I was trying to troubleshot a problem I had with my GE dryer not starting. I went to AppliancePartsPros.com because they have excellent DYI videos on how to make repairs. I determined that the problem was in the push start switch. I ordered the switch online and it took 3 days to arrive. It took 5 minutes to replace the switch and the dryer works perfectly.
Read more
More
$23.32
- Compare At:
-
$27.75
- You Save:
-
$4.43
Genuine Ge part
By: Ge
Part Number: WE4M519
The Dryer Rotary Start Switch is an OEM replacement part for GE electric dryers. This switch functions as the manual interface for selecting drying cycles and initiating operation. Reliable start switch function is key for convenient control.
Symptoms of a faulty switch include:
- Difficulty turning or clicking through cycle options
- Dryer failing to start even when a cycle is selected
- Dryer starting unintentionally or without input
- Potential safety concerns if switch malfunctions
Causes of a bad start switch can be normal wear and tear over heavy usage periods. Worn internal components prevent dependable cycling.
This OEM GE replacement is compatible with Hotpoint, RCA and some Kenmore models.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
It wouldn't start i needed a rotary start switch Tange M. • Florissant , MO • June 20, 2014
I watch the video on YouTube. And it went step by step on how to take it off and on
Read more
More
$14.20
- Compare At:
-
$18.72
- You Save:
-
$4.52
Genuine Whirlpool part
By: Whirlpool
Part Number: W11429587
The Dryer Door Catch is an OEM part for Whirlpool dryers. It keeps the dryer door securely closed during operation.
A bad door catch can occur due to regular use, wear and tear, or accidental damage. If you notice that the dryer door is not staying closed or is popping open during the drying cycle, it may indicate a problem with the door catch.
Symptoms of a bad door catch include:
- The dryer door not staying closed
- Difficulty in properly latching the door shut
- Loud banging noises or vibrations
Replace your faulty dryer door catch with this genuine OEM part to restore your dryer door.
This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Dryer door catch broke, unable to close the door! Stella H. • Beverly Hills , FL • April 10, 2020
I watched your video and had it fixed in less than 1 minute!
Read more
More
$20.95
- Compare At:
-
$25.14
- You Save:
-
$4.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 3949247V
The Washer Lid Switch is an OEM replacement part for Whirlpool washers. It is an electronic component located inside the washer lid that detects when the lid is open or closed in order to activate the necessary functions during the wash cycle.
Symptoms of a bad Washer Lid Switch include:
- The wash cycle will not start even when the lid is closed
- Error codes displayed related to the lid being open
- Inability to advance through cycle selections
- Flashes or other improper lid switch behavior
Causes of a bad lid switch can be normal wear and tear over time. Moisture exposure may also contribute to internal component failure.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not drain
-
Won't start
-
Will not fill with water
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Our washer wouldn't rinse spin or drain Jan C. • Somerville , MA • April 23, 2015
My son was doing his laundry, only to announce that the washer wouldn't rinse, spin or drain. I looked on line at new washers and was staggered to see how much they cost, our Whirlpool is 20 years old! Then I looked on Craig's list to see about getting a used washer, but when I found something that looked good, and looked up how it performed, most of them had terrible reviews. So, I looked at a video that told about the 5 most common things to go wrong and figured out it was a broken lid...
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Lg part
By: Lg
Part Number: 3550EL1005C
Note: Does not include moisture sensor bars. For the moisture sensor bars, order 2 of part# 6500EL3001A.
The Guide Cover is an OEM part for LG dryers. The part allows dust and debris to exit the dryer drum while preventing small clothing items from slipping through.
Causes of a bad Guide Cover can include accumulation of lint and debris that can restrict airflow, physical damage from handling or excessive use, and general wear that can compromise the fit and effectiveness of the cover.
Symptoms of a bad Guide Cover include:
- Increased drying times due to poor airflow.
- Unusual noises from lint hitting the fan or other components.
- Overheating of the dryer.
- Visible damage or misalignment of the cover that affects performance.
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Sheets broke cover guide with filter and sensor Stefan H. • Ponte Vedra Beach , FL • March 15, 2019
I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here.
Dryer is fixed, I'm happy.
Read more
More
$20.62
- Compare At:
-
$24.54
- You Save:
-
$3.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10111905
The Door Catch is an OEM part for Whirlpool dryers designed to securely hold the dryer door closed during use. This catch is the female piece on the door. For the strike on the front panel that inserts into the catch order W10295405.
Symptoms of a bad Dryer Door Catch include:
- The dryer door not staying shut
- Difficulty in closing the door
- The dryer failing to start due
Causes of failure can include normal wear and tear from the constant use of the dryer, damage from an external force, or misalignment from the door being improperly closed or hit. Over time, these factors can lead to the weakening or breaking of the door catch.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Start button was broke off in the gray part of the control board on our whirlpool cabrio dryer Curtis S. • Gregory , SD • January 06, 2015
There is a video on youtube that talks about how to disassemble the electronic component out of the control board so I really won't go into that part of it. This disassembly of the control board will need to take place before you can even get started taking the gray piece out of the console to replace it. Be careful not break off the little tips behind the control knob, don't force it, it does come apart easily and there is an easy way to do it, that is also on youtube.
This is where the...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W11086603
The Lint Screen Grille is an OEM part for Whirlpool dryers. It works with the lint screen to capture and collect lint during the drying cycle, preventing it from clogging the vent and ensuring proper airflow.
A bad dryer lint screen grille can be caused by regular wear and tear, accumulation of debris, or accidental damage. If the grille becomes cracked, broken, or warped, it can lead to lint escaping from the lint screen or obstructed airflow.
Symptoms of a bad dryer lint screen grille include:
- Lint escaping from the lint screen area.
- Reduced drying efficiency or longer drying times.
- Visible damage or warping of the grille.
- Excessive lint buildup in the venting system.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$28.22
- Compare At:
-
$33.30
- You Save:
-
$5.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10117655
The Push To Start Switch is an OEM part for Whirlpool dryers. It is the interface between the user and the dryer, initiating the drying cycle when pressed. This switch is essential for the safe and efficient operation of the dryer, ensuring that it starts only when the button is deliberately pressed, thereby preventing accidental start-ups.
Causes of a bad Push To Start Switch can include electrical failures within the switch mechanism, wear and tear from repeated use, or damage from spills or moisture exposure.
Symptoms of a bad Push To Start Switch include:
- The dryer not starting when the button is pressed
- The need to press the button multiple times to start the dryer
- The dryer starting without the button being pressed
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer wouldn't start Kha L. • Reinholds , PA • December 20, 2015
The help tech helped me troubleshoot what the problem might be, and we narrowed it down to a faulty switch. He helped us pick the right part, and the video was helpful - it gave me the confidence that I could fix it myself. The part came, and it only took me 5 minutes to change out the switch. Now my dryer works great! I saved my wife $500 for a new dryer! :)
Read more
More
$53.27
- Compare At:
-
$63.39
- You Save:
-
$10.12
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036
The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.
Symptoms of a failing Washer Door Switch include:
- The washer not starting or stopping unexpectedly during a cycle
- Error codes related to door closure issues displayed on the washer's control panel
- The washer door not locking properly or the lock mechanism not engaging
- The washer continuing to operate with the door open
Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This part fixes the following symptoms
-
Will not drain
-
Pumps but will not spin
-
Timer will not advance
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new...
Read more
More
$20.95
- Compare At:
-
$32.43
- You Save:
-
$11.48
Genuine Ge part
By: Ge
Part Number: WE04X28977
This door switch is an OEM replacement part for GE dryers. This switch is designed to promptly end the dryer cycle when the door is opened. The switch comes equipped with a metal lever arm and plunger that can be depressed to activate the switch.
Causes of a bad door switch can include normal wear over time from repetitive open/close cycles. Exposure to moisture, food drips or cleaning chemicals may also contribute to switch failure.
Symptoms of a bad door switch are:
- The oven will not start a bake cycle with the door securely latched
- Error codes displayed related to the door being open
- Inconsistent or unreliable door closure sensing
- Failure to function properly after cleaning or moisture exposure
This OEM part is also compatible with ranges sold under Hotpoint and RCA brands and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dryer door kept popping open. Debra S. • Peabody , MA • September 22, 2019
We ordered a door switch, dryer latch and strike plate. We realized that we only needed to replace the door switch. We watched a few videos and then replaced the switch. We couldn’t find a video for our model but they did give us a pretty good idea about what we needed to do. The hardest part was getting the original door switch out, all of the videos we watched showed us that it would pop out with a little pressure from a flat head screw driver, from the front of the switch. We could not get...
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Whirlpool part
By: Whirlpool
Part Number: W10828351
The Lint Screen Cover and Filter is an OEM part for Whirlpool dryers. It serves a dual purpose: the lint screen traps lint and debris from clothes during the drying process, preventing them from clogging the dryer vent, while the cover ensures the lint screen is securely positioned and contributes to optimal airflow within the dryer.
Causes of a bad part include tears or holes in the lint screen that allow lint to pass through and clog the vent, a cracked or broken cover that fails to secure the lint screen properly, or buildup of fabric softener and lint that reduces the effectiveness of the filter.
Symptoms of a bad Lint Screen Cover and Filter include:
- Increased drying times
- Excessive lint buildup around the dryer
- The dryer may run hotter than normal
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
The shroud/ holder for the lint filter was broken and needed replaced as did the filter itself Lee M. • Blackfoot , ID • September 27, 2014
Ordered a new filter and filter holder
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Ge part
By: Ge
Part Number: WD21X10261
The Interlock Switch is an OEM replacement part for GE electric and gas dryers. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.
Symptoms of a faulty interlock switch include:
- Dryer failing to start or running with the door open
- Timer display not illuminated when start button is pressed
- Inability to open the dryer door during operation
- Dryer suddenly stopping mid-cycle before fully drying clothes
Causes relate to the internal component contacting the door frame over 50,000 open/close cycles potentially exposing wiring to wear. Regular cleaning the external switch area prevents dust or lint buildup skewing performance.
This genuine GE switch is compatible with Hotpoint and RCA dryers as well.
Note: Can be used as a dishwasher door switch on specific models. Check your model number for the most accurate results.
Do-It-Yourself Stories from Customers like You
Melted door switch. Christopher K. • Greeneville , TN • February 03, 2024
The full story:
Dishwasher stopped running mid-cycle. When I first began troubleshooting I tried manually advancing the timer knob, and the machine would run. That led me to believe that the actual timer assembly was bad, so I replaced it. The dishwasher ran fine for a day, and then the same problem came back. This time, however, I also had to push in on the door to get it to run. I looked around online, and someone suggested that the door latch wasn't closing tightly enough. I adjusted the...
Read more
More
$18.22
- Compare At:
-
$21.50
- You Save:
-
$3.28