Range / Cooktop / Oven Switch Surface Element Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316075103
The Bake Element is an OEM replacement part for Frigidaire ovens that provides the heat necessary for baking. Located at the bottom of the oven, the bake element heats up when electrical current flows through it, converting electricity into heat. This heat is then distributed throughout the oven cavity to cook or bake the food evenly. Measures approximately 19 ¼ inches x 17 ¾ inches
Causes of a bad bake element can include visible damage such as blistering, cracking, or splitting of the element itself. Over time, exposure to high temperatures can lead to material fatigue and eventual failure. Electrical issues, such as a short circuit or a power surge, can also damage the element, preventing it from heating properly.
Symptoms of a bad Bake Element include:
- Oven not heating to the set temperature
- Uneven cooking or baking results
- Visible damage to the element
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Bake element caught on fire and burned until it broke apart at one spot Steve M. • Merritt Island , FL • July 04, 2014
It took no time to find where the problem was! I got my Frigidaire model number and got on-line with AppliancePartsPros.com where I have gone for over a decade for all my household repairs. Why? because they are honest, helpful, considerate, fast, and its easy to locate and SEE the exact part I need. 10 minutes after the burning of my element, one was in my cart and ordered! Done. TWO days later, the part arrived. I turned off the circuit breaker, unscrewed the two 1/4" screws and pulled off...
Read more
More
$32.95
- Compare At:
-
$42.59
- You Save:
-
$9.64
Genuine Whirlpool part
By: Whirlpool
Part Number: W10779716
The Bake Element is an OEM replacement part for Whirlpool ovens. It is a component responsible for generating the heat necessary for baking and roasting operations within the oven cavity.
Symptoms of needing to replace the bake element include:
- Uneven or inconsistent baking results
- Difficulty in reaching or maintaining the desired oven temperature
- Visible damage or burnout on the element itself
- Unusual smells or odors associated with a faulty heating element
Causes of a faulty bake element can include normal wear and tear over time, electrical malfunctions, or physical damage due to impact or excessive temperature fluctuations.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore oven models.
Do-It-Yourself Stories from Customers like You
Oven temperature was very low and inconsistant James H. • Fallon , NE • July 23, 2017
I ordered the part I was sure I needed through the Appliance Pro website. I was surprised the part arrived in just two days. FIRST UNPLUG THE OVEN.. I removed the baking racks then two screws holding the plate over the element. I then removed three screws holding the old element in place, then gently wiggle/pull the element free from the electrical connections in the back of the oven. (Note: You cannot see the connections at this point. You'll need to remove the terminal block cover on the...
Read more
More
$50.24
- Compare At:
-
$59.79
- You Save:
-
$9.55
Genuine Ge part
By: Ge
Part Number: WB44X5082
The Oven Bake Element is an OEM replacement part for GE ovens. It is a critical component responsible for generating the heat necessary for baking and cooking food in the oven cavity. Measuring 18 ¼ inches wide and 14 ½ inches deep to the mounting flange. It has an element extension of approximately 2 1/4 inches past the bracket to the terminals. This element is rated at 220 volts and 2300 watts.
Causes of needing to replace the bake element can include normal wear over time, electrical malfunctions, or physical damage from impact or excessive temperature fluctuations.
Symptoms of a faulty oven bake element include:
- Uneven baking or hot/cold spots within the oven
- The oven not heating up to the desired temperature
- Visible signs of damage or burnout on the bake element itself
- Unusual smells or burning odors coming from the oven
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore oven models, ensuring a perfect fit and reliable heat generation for your specific appliance.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven is too hot
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
The baking element on our 28 year old oven decided to quit on new year's eve while preheating we heard a loud crackling pop which was the element shorting out it bubbled and started smoking Cynthia B. • Waukesha , WI • January 06, 2015
Of course, these things always seem to happen on a holiday! Luckily we were not having guests for dinner - so quickly changed our eating plans for the evening. I went directly online and Googled "Bake elements for GE ovens". At first I did not think I would have luck finding this part because of the oven's age. AppliancePartsPros.com was one of the service dealers listed first and catered specifically to GE appliances and parts. So, I typed in the Model number and low and behold, a screen...
Read more
More
$49.95
- Compare At:
-
$59.44
- You Save:
-
$9.49
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436001
The Large Surface Element Switch is an OEM replacement part for Frigidaire ranges and cooktops. It is a component that controls the power and temperature settings for one of the larger surface heating elements on the appliance.
Symptoms of a faulty Large Surface Element Switch include:
- Difficulty in adjusting or maintaining consistent heat settings
- The surface element not heating up or cycling on and off unexpectedly
- Flickering or erratic behavior of the surface element
- Burning smell or visible signs of overheating
Causes of a bad large surface element switch can include normal wear and tear, exposure to excessive heat or moisture, or electrical malfunctions.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore range and cooktop models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The front left element (8 inch) would stay hot on lower control settings. Michael S. • West Seneca , NY • September 13, 2022
After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty.
One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove...
Read more
More
$34.57
- Compare At:
-
$41.14
- You Save:
-
$6.57
Genuine Ge part
By: Ge
Part Number: WB44T10011
The Bake Element is an OEM part for GE ovens, designed to provide the heat necessary for baking. This element is located at the bottom of the oven cavity and heats up when electricity is applied, converting electrical energy into heat to cook food evenly.
Over time, however, the bake element can wear out or become damaged.
Symptoms of a bad Bake Element include:
- Visible signs of wear or damage, such as blistering, cracks, or breaks in the element.
- A burnt out element that no longer glows red or heats up.
- Food not baking evenly or thoroughly.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Oven bake element malfunction Fred H. • Dacula , GA • March 19, 2014
Watched AppliancePartsPros.com instruction video.
Ordered new oven bake element, which arrived a couple days later.
Removed old oven bake elelment.
Installed new oven bake element.
I am very appreciative of the instructional video. It's a very handy way for me to figure out if it's a do-it-yourself repair or not. In this case, another key thing it pointed out was the fact that the two wires that attach to the oven bake element have a tendency to slip back into the insulation behind the...
Read more
More
$53.80
- Compare At:
-
$83.29
- You Save:
-
$29.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3149400
The Surface Element Switch is an OEM replacement part for Whirlpool ranges and ovens. This component serves as the control mechanism for the 8-inch surface heating element, allowing you to precisely regulate the temperature or turn the burner on and off.
Symptoms of a faulty surface element switch may include:
- The heating element not turning on or off properly
- Issues with adjusting or maintaining the desired heat level
- Flickering or erratic behavior of the burner
Causes of needing to replace the surface element switch can include normal wear and tear over time, electrical malfunctions, or damage from exposure to high heat or spills.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore range and oven models.
For small element switch use- 3149404
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The burner on my electric stove was "running wild" (not controlling temperature correctly) James S. • South Abington Township , PA • June 22, 2014
The fix was to replace the infinite control switch on my Whirlpool range. A simple task.
Read more
More
$53.95
- Compare At:
-
$63.66
- You Save:
-
$9.71
Genuine Ge part
By: Ge
Part Number: WB30X46987
The Bake Element is an OEM replacement part for GE electric ranges. It is the internal heating element located at the bottom of the oven cavity that provides heat for baking and convection cooking functions. This heating element measures 17 1/2 x 18 1/2 inches.
Causes of a bad bake element include failure due to normal wear and tear over extended use. Exposure to spills or splatters inside the oven can potentially damage heating coils or insulators.
Symptoms of a bad bake element are:
- Inconsistent or uneven baking temperatures
- Element does not heat up or turns red but puts out no heat
- Buzzing/humming sounds from beneath oven cavity
- Failure of oven to operate or preheat as expected
This OEM part is also compatible with ranges sold under the Hotpoint, RCA and some Kenmore brands.
Do-It-Yourself Stories from Customers like You
Ge cafe gas range electric oven would not heat over @ 200f in bake mode John T. • Charlotte , NC • December 26, 2025
Visually inspected bottom heating element and found that it had failed. There was a @2" gap of missing element and burned debris below the damaged area. This was discovered 3 days before Christmas.
1. Open under oven storage drawer and look on the left inside frame frame for Model ID and Serial No.
2. Search on AppliancePartsPro.com for bottom heating element.
3. Ordered part on Sunday evening before Wednedsay Christmas - with expedited next day delivery.
4. Received order confirmation and...
Read more
More
$92.95
- Compare At:
-
$110.61
- You Save:
-
$17.66
Genuine Ge part
By: Ge
Part Number: WB24X25013
The Switch Infinite Control is an OEM part for GE ranges. It acts as a critical regulator for the temperature settings on electric dual-element burners, allowing users to adjust the heat level accurately. This component ensures that the electric burners heat up to the desired temperature and maintain it consistently for optimal cooking results.
Symptoms of a bad Switch Infinite Control include:
- Burners not heating to the set temperature
- Inability to adjust the heating level of burners
- Burners heating unevenly or excessively
Causes of a bad switch can include internal component failure due to overheating, wear and tear from frequent use, or electrical faults within the switch mechanism.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dual electric burner. We could not control temperature, suspected the burner switch was bad. Gary L. • St Louis , MI • February 23, 2021
I got online and found AppliancePartsPros.com. I found others had the same problem, and
had replaced the switch, with my model number your rep got me the exact switch
and a video on how to change it. It took approx 15-20 min . was very happy with the
service, will use again in future if needed.
Gary
Read more
More
$32.95
- Compare At:
-
$38.88
- You Save:
-
$5.93
Genuine Ge part
By: Ge
Part Number: WB44T10010
The Oven Bake Element is an OEM replacement part for GE ovens. It is a crucial component that generates the heat necessary for baking and roasting functions within the oven cavity.
Dimensions:
- 18" side to side 19.50" from the mounting bracket to the back
- 2-3/4" between terminal centers
- 3" from the terminal to the back plate (calrod bent at a 45-degree angle)
- Male Spade 1/4" terminals
Symptoms of a bad oven bake element include:
- Uneven heating or hot/cold spots within the oven
- Oven taking longer than usual to reach the desired temperature
- Element glowing irregularly or not at all during the baking cycle
Causes of a bad bake element can range from simply burning out due to repeated use over time to physical damage caused by drips, spills, or impact.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
The radiant elements had been dead for years the bake element failed spectacularly on Thanksgiving Christine W. • Golden Valley , MN • December 04, 2020
It took a few of us. One to vacuum up the fire extinguisher residue. One to trip the breaker. One to provide light. One to clean out under the stove while it was pulled out. I disconnected the bake element. I needed help to disconnect one of them because it was very tight. I put the element into the oven and reconnected the right side, very easy. The left side fell back into the slot. Curses ensued. I removed the back plate and it was very easy to thread the left wire back into the oven and...
Read more
More
$58.45
- Compare At:
-
$91.24
- You Save:
-
$32.79
Genuine Ge part
By: Ge
Part Number: WB44X200
The Oven Baking Element is an OEM part for GE electric ranges and wall ovens. This baking element is located at the bottom of the oven cavity and provides heat from below during baking function. Even, consistent heating is vital for optimal cooking performance.
Causes of a bad baking element can include mineral buildup from repeated high temperature use that interferes with heating ability. Element coils breaking or blowing out is also common after several years of use.
Symptoms of a bad baking element include:
- Inconsistent or inadequate heating from the bottom of the oven
- Cook times longer than normal for many recipes
- Error codes indicating issues with the lower heating element
- Open or shorted element coils preventing any heating
This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Oven not heating evenly
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015
I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns.
The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more...
Read more
More
$30.60
- Compare At:
-
$68.17
- You Save:
-
$37.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10308477
The Oven Bake Element is an OEM part for Whirlpool ovens. It is a component responsible for providing the heat necessary for baking and cooking. This element is located at the bottom of the oven and heats up when electricity is applied, allowing for consistent cooking temperatures.
Symptoms of a bad Oven Bake Element include:
- Uneven baking results or undercooked food
- Lack of heat generation even though the oven is turned on
- Visible damage to the element such as blistering, cracks, or breaks
Causes of a bad element can stem from natural wear and tear, excessive cooking temperatures overextending the element's capacity, or electrical issues causing the element to fail prematurely.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
My electric oven would not fully heat up Richard Z. • Avon , MN • December 20, 2014
The first thing I did was call appliance pros. The tec told me it was a good chance it was the thermostat. He told how to test it with my ohm meter and what range it should be in. I pulled it out and tested it, which was out of the limits he told me it should be in. So I ordered the part. When it arrived in two days, I installed it. The oven now works perfect. Thank you so much. I was just about to go spend $800 on a new oven, and instead fixed it for $75. Awesome website. It was...
Read more
More
$48.95
- Compare At:
-
$57.76
- You Save:
-
$8.81
Genuine Ge part
By: Ge
Part Number: WB24T10025
The Infinite Switch (8") is an OEM replacement part for GE stovetops. It is responsible for controlling the heat output of the burner. The switch allows you to adjust the heat level by turning the knob, regulating the amount of power supplied to the burner. A bad infinite switch can be caused by regular wear and tear, electrical issues, or overheating. It can also become damaged if exposed to moisture.
Symptoms of a bad infinite switch include:
- The burner not heating up
- The burner staying on at the highest heat setting
- The burner not turning off or not responding
- Visible signs of damage
Causes of a bad infinite switch can include normal wear and tear over time, exposure to excessive heat or moisture, or electrical malfunctions.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The heating element where boiling hot at any seting of the knob Christopher H. • Lawrence , KS • August 17, 2014
I replace the Infinite Switch and that seems to be the trick for keeping the temperture under control.
Read more
More
$34.49
- Compare At:
-
$41.39
- You Save:
-
$6.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP308180
The Oven Bake Element is an OEM part for Whirlpool ovens. This part heats the oven's interior during the baking process. Located at the bottom of the oven, the bake element heats up when electricity passes through it, allowing for consistent and even cooking.
Causes of damage to the Oven Bake Element can include normal wear and tear from regular use, a buildup of food debris causing hot spots and potential burns out, or electrical issues leading to shorts or surges that damage the element.
Symptoms of a bad Oven Bake Element include:
- Visible signs of damage to the element, such as blistering, holes, or breaks in the element itself.
- The oven failing to heat up at all
- A lack of visible glowing from the element during operation
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Oven is too hot
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Heating element lower broke creating a direct ground fault to the oven wall and resulted a flash of bright fire Stanley B. • Chula Vista , CA • June 16, 2017
My wife was using the oven and she shouted "emergency, oven fire" as i was half asleep in the reclining chair (I will be 86 in Oct.) As I dashed, well not quite, into the kitchen mentioning the fire extinguisher, she exclaimed "no, electrical fire, throw the circuit breaker"....which I very promptly did and the fire was no more; just a lot of bad odor.
Removing the severed 32 year old bake oven element was somewhat delayed due to corrosion of the element mounting screws and electrical...
Read more
More
$40.95
- Compare At:
-
$71.72
- You Save:
-
$30.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7406P428-60
The Lower Bake Element is an OEM part for Whirlpool ovens. It is positioned at the bottom of the oven and is primarily responsible for producing the heat required for baking. By converting electrical energy into heat, this element ensures consistent and even cooking temperatures, crucial for achieving perfect baking results.
Symptoms of a bad Lower Bake Element include:
- Lack of heat in the oven, leading to undercooked food,
- Uneven baking with some parts of the food less cooked than others,
- Visible damage or breakage in the element itself,
- No glow from the element when the oven is turned on.
Causes of bake element failure typically involve burnout from continual use, electrical issues such as faulty wiring or connections, or physical damage.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Lower oven would not heat up on maytag gemini electric range Jason B. • Boylston , MA • October 19, 2014
Replaced lower and upper element. Internet research suggested it was the control board. Thankfully it was a much quicker and cheaper fix.
Read more
More
$36.95
- Compare At:
-
$43.60
- You Save:
-
$6.65
Genuine Ge part
By: Ge
Part Number: WB44X173
The Broil Element is an OEM part for GE ovens. It is designed to provide the high heat necessary for broiling food, such as meats and vegetables, allowing for a quick cooking process that seals in flavors and creates a deliciously crispy exterior.
Causes of a bad Broil Element can include failure due to internal coil damage, burnout from excessive use, or electrical issues such as short circuits or loose connections that prevent it from heating.
Symptoms of a bad Broil Element include:
- The oven not heating up to the set broil temperature.
- Uneven cooking or browning of food.
- No visible glow from the element during operation.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Oven not heating evenly
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015
I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns.
The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more...
Read more
More
$28.23
- Compare At:
-
$61.01
- You Save:
-
$32.78
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303051519
The bake element is an OEM replacement part for Frigidaire ovens. This element is located at the bottom of the oven cavity and is responsible for providing the heat needed for baking. When the oven is turned on, electrical current flows through the bake element, causing it to heat up and glow red. This process radiates heat evenly throughout the oven, ensuring that food is cooked thoroughly and uniformly.
Causes of a bad Oven Bake Element include visible damage such as blistering or holes, which can occur after years of use or from food spillages that corrode the metal. Additionally, a malfunctioning element may not glow red or may only partially heat, indicating that it's unable to conduct electricity effectively.
Symptoms of a bad Oven Bake Element include:
- The oven not heating up properly or at all
- Uneven cooking or baking results
- The element not glowing when the oven is turned on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Oven not heating evenly
-
Oven is too hot
-
Little to no heat when baking
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Lower element not getting hot enough on electric range Richard H. • North Lewisburg , OH • February 14, 2020
Ordered spare part that actually fit my oven. Arrived in three days from next state over. Unplugged power cord, removed racks, used 1/4" socket on ratchet with 6 inch extension to remove two sheet metal screws at lower back of oven. Pulled old element out 2 inches then tilted front of element up 45 degrees for spade connectors to clear holes at back of oven. Once clear, pulled element forward until the white #16 wires pulled through the openings in the oven (inside at the back). By hand, gently...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64