Washer Liquid Valve Parts

The Water Inlet Valve is an OEM part for Whirlpool appliances. It controls the flow of water into the washing machine.

Causes of a faulty water valve can include wear and tear over time, sediment or mineral buildup, electrical component failure, or physical damage. These factors can result in issues such as inadequate water flow, water leakage, or the appliance not filling with water.

Symptoms of a bad water valve may include:

• Insufficient water filling in the appliance
• Slow or no water flow
• Water leakage from the valve area

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Water inlet valve assembly is an OEM part for Whirlpool washing machines. This valve assembly controls the flow of water entering the washing machine. It regulates water levels during different wash cycles like filling, rinsing, and draining.

Causes of a bad water inlet valve include mineral buildup restricting water flow, worn or damaged internal seals and components, or faulty electronic components regulating water pressure and flow.

Symptoms of a bad water inlet valve include:

• Inability to fill with water properly
• Slow or inconsistent water filling 
• Excessive noise from the water inlet area
• Water leaks around the inlet valve

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This dual water inlet mixing valve controls and blends the hot and cold supply during the fill cycle. Replacing a failing valve restores proper fill rate and water temperature selection for consistent wash performance.

• Opens and closes to admit hot and cold water as directed by the control, creating the selected temperature
• Helps maintain proper flow to the tub/dispenser during fill
• Common failure symptoms: no fill or slow fill, incorrect water temperature during fill, water continuing to drip or flow into the tub when the machine is off, or leaks from the valve body
• Humming from the valve with little or no water flow due to internal failure or clogged screens

• Disconnect power and shut off both water supplies before servicing; relieve line pressure
• Place towels, disconnect hoses, and note hot/cold orientation; inspect/clean inlet screens
• Transfer any brackets/fittings from the old valve if required; connect hoses securely without overtightening
• Turn water back on, check for leaks, then run a fill test to verify operation

The Cold Water Inlet Valve is an OEM replacement part specific to Whirlpool washing machines. It is responsible for allowing cold water to enter the wash tub during specific cycles. 

Symptoms of a bad cold water inlet valve include:

• Inability to select cold water cycles 
• No cold water entering the tub even when valve is called for
• Water leaks around the valve area
• High water usage as the valve fails to close fully

Causes can be mineral buildup over time restricting water flow, or mechanical failure of internal components like seals or diaphragms. Replacing the inlet valve prevents further issues like inconsistent fill levels due to too much or too little water entering the tub.

This OEM Whirlpool replacement valve provides a tight seal and reliable water control. It restores cold water functions and is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of hot and cold water into the washer during the fill cycles. This valve ensures that the right amount of water enters the tub for washing and rinsing clothes, contributing to the overall efficiency of the washing process.

Causes of a bad water inlet valve can include wear and tear over time, mineral deposits from hard water, or electrical issues that prevent the valve from opening or closing properly.

Symptoms of a bad water inlet valve include:

• Washer not filling with water
• Slow or insufficient water flow
• Washer continuing to fill with water even when turned off
• Leaks or drips from the valve area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

• Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
• A desire to refresh or update the appearance of the appliance without the need for complete replacement
• Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

• Visible scratches or chips on the appliance surface
• Areas of exposed metal prone to rust
• Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Water Inlet Valve is designed to regulate the flow of water into your washer, ensuring optimal performance and efficiency. This genuine OEM part provides precise control over water levels, preventing leaks and maintaining proper water pressure during wash cycles. Built to last, the water inlet valve is compatible with a wide range of Samsung washer models, ensuring a perfect fit and easy installation. By replacing a faulty valve with this genuine OEM part, you can restore your washer's functionality, reduce the risk of water damage, and extend the lifespan of your appliance. Whether you're experiencing issues like no water filling or inconsistent water flow, the Washer Water Inlet Valve offers a reliable solution for maintaining your washer's performance. Trust in this durable and high-quality component to keep your laundry routine running smoothly and efficiently.

The Water Inlet Valve is an OEM component for Whirlpool and KitchenAid washing machines. As part of the water supply system, the water inlet valve controls the flow of water into the washer during fill cycles.

Causes of a bad water inlet valve include mineral buildup or sediment accumulation inside the valve mechanism over time. This can restrict its ability to open and close properly.

Symptoms of a bad water inlet valve are:

• The washer fails to fill or fills slowly 
• Water leaking from the valve area
• Loud knocking or clanking sounds coming from the valve

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Water Inlet Valve is an essential component designed to regulate the water flow into your Samsung washer. This genuine OEM part ensures that your appliance receives the correct amount of water for each wash cycle, promoting optimal cleaning performance and efficiency. Built with high-quality materials, the Washer Water Inlet Valve offers durability and reliable operation, minimizing the need for frequent replacements. Installing this valve is straightforward, allowing you to restore your washer's functionality quickly and easily. Compatible with a variety of Samsung washer models, this genuine OEM part guarantees a perfect fit and seamless integration with your appliance. By choosing the Washer Water Inlet Valve , you benefit from improved water control, reduced risk of leaks, and enhanced overall performance of your washer. This part not only helps maintain the longevity of your appliance but also ensures a consistent and hassle-free laundry experience. Trust in the quality and precision of this genuine OEM part to keep your Samsung washer running smoothly and efficiently.

The Valve Assembly Inlet is an OEM part for LG washing machines. It controls the flow of water into the washer, allowing the machine to fill with the correct amount of water for each cycle. This ensures that your washer operates efficiently and effectively.

Over time, inlet valves can wear out or become damaged due to mineral deposits, electrical issues, or regular wear and tear.

Symptoms of a bad valve assembly inlet include:

• The washer not filling with water
• Slow or irregular water flow
• Water leaking from the valve area
• Error codes related to water intake on the washer's display

This OEM LG part is also compatible with Sears/Kenmore models.

The Valve is an OEM part for Whirlpool washing machines. This water inlet valve controls the flow of water into the washing machine, ensuring the proper amount of water is used for each wash cycle. It plays a crucial role in the washing process by regulating the water intake from your home's plumbing.

Over time, the valve can wear out or become clogged with sediment and mineral deposits, leading to issues with water flow. Electrical malfunctions or mechanical failures can also impair the valve's functionality.

Symptoms of a bad valve include:

• The washing machine not filling with water
• Slow filling or no water flow
• Leaking water when the machine is off
• Error codes related to water supply issues
• Unusual noises during the water filling cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The water valve is an OEM replacement part for Whirlpool washing machines.

Causes can be mineral buildup blocking ports or seal deterioration over time/use. Wear of valve components reduces regulation capabilities.

Symptoms of a faulty valve may include:

• Water not entering or draining properly
• Inability to advance to certain stages
• Error codes indicating water issues

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer during the filling cycles, ensuring the proper amount of water is used for washing and rinsing clothes. This valve plays a critical role in the overall performance and efficiency of the washing machine.

Causes of a bad water inlet valve can include mineral deposits or debris clogging the valve, electrical failure, or wear and tear from regular use.

Symptoms of a bad water inlet valve include:

• Washer not filling with water
• Slow filling or no water flow
• Leaking water from the valve area
• Washer not advancing through cycles properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Vacuum Break is an OEM part for Whirlpool washing machines, designed to prevent the siphoning of water back into the machine once it has been drained. This part ensures that dirty water does not re-enter the wash drum, maintaining the cleanliness of the wash cycle and protecting the integrity of the clothes being washed.

A malfunctioning Vacuum Break can lead to various issues, including inefficiencies in water use, prolonged or ineffective wash cycles, and even the risk of mildew or odors developing from standing water. 

Symptoms of a bad Vacuum Break include:

• Water siphoning back into the tub after the spin cycle
• Unusual noises coming from the washing machine during or after the drain cycle
• Clothes being wetter than usual at the end of the cycle, indicating incomplete draining
• Potential leaks or water buildup at the back of the washing machine

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Valve Triple Water is an OEM part for GE washing machines. This valve controls the flow of hot, cold, and warm water into the washing machine, allowing for precise temperature settings during wash cycles. It ensures that the correct amount of water at the desired temperature is delivered to the washing tub for optimal cleaning performance.

Causes of a bad triple water valve can include mineral deposits or debris blocking the valve, wear and tear from regular use, or electrical failures affecting the valve's solenoids. A malfunctioning valve can disrupt water flow, leading to issues with washing performance and water temperature control.

Symptoms of a bad triple water valve include:

• Washing machine not filling with water
• Incorrect water temperature during wash cycles
• Water leaks from the valve area
• Inconsistent or slow water flow into the machine

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.