Washer Foreign Objects Tub Pump Parts

The Washer Filter Assembly is an essential component for maintaining your Samsung washer's optimal performance. This genuine OEM part ensures a perfect fit and reliable functionality, specifically designed for Samsung washing machines. By effectively trapping lint, debris, and other particles, the filter assembly helps prevent blockages and enhances the efficiency of your washer. Installing this filter assembly is straightforward, allowing you to quickly restore your appliance's performance without hassle. Regular replacement with this genuine OEM part can extend the lifespan of your washer, reducing the need for costly repairs. Additionally, maintaining a clean filter assembly contributes to cleaner laundry results, providing a better washing experience. Compatible with a wide range of Samsung washer models, this washer filter assembly offers both quality and peace of mind. Choose the Washer Filter Assembly to ensure your Samsung washer operates smoothly and efficiently for years to come.

This replacement filter traps debris and contaminants within your appliance's system to help protect internal components and maintain proper performance. Swapping a clogged or damaged filter can restore flow/airflow, reduce odors and buildup, and support efficient operation. What it does:

• Captures grease, lint, dust, or food particles to prevent recirculation and protect internal parts
• Supports proper airflow or fluid flow for ventilation, circulation, or drainage
• Helps minimize odors and residue caused by a saturated filter
• Typical signs it's due: visible tears/warping, heavy buildup, restricted airflow/venting, lingering odors

• 1 filter

• Disconnect power before servicing and allow any hot surfaces to cool
• Note the filter's orientation and any tabs/clips; install the new filter the same way
• Clean the surrounding housing or channel before installation
• Do not operate the appliance without required filter(s); follow your model's maintenance schedule

This water recirculation pump moves wash water through the washer's recirculation circuit to help saturate loads and improve cleaning. Replacing a failed pump restores proper water movement and wash performance.

• Circulates water from the tub/sump back through the recirculation line during wash
• Maintains flow through the dispenser or spray nozzle for better saturation
• Replaces a pump that is noisy, leaking, seized, or not moving water
• Symptoms include no recirculation spray, reduced cleaning results, or a humming motor without water movement

• Disconnect power and turn off water supply before servicing
• Access is typically from the lower front or rear service panel; place towels to catch residual water
• Transfer hoses, clamps, and the electrical connector from the old pump to the new one
• Ensure correct hose routing and secure connections; check for leaks during a quick test cycle

The Pump Assembly is an OEM part for Frigidaire washing machines. This part is responsible for draining the water from the washer at the end of each wash cycle.  

Causes of a bad Washer Pump Assembly can include:

• Obstructions in the pump or its inlet/outlet hoses, which can hinder water flow.
• Wear and tear on the pump's motor or impeller, reducing its effectiveness in water evacuation.
• Electrical issues, such as faulty wiring or connections, that prevent the pump from operating.

Symptoms of a failing Washer Pump Assembly include:

• Water not draining properly from the machine.
• The washer fails to enter the spin cycle due to the presence of excess water.
• Unusual noises during the drain phase, indicating a struggling or damaged pump.
• Error codes displayed on the washing machine that indicate drainage problems.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This drain pump assembly moves water out of the washer during the drain and spin parts of the cycle. Replacing a weak, noisy, or leaking pump restores proper draining, prevents standing water, and helps cycles finish correctly.

• Pumps wastewater from the tub to the household drain
• Supports proper spin performance by clearing water from the tub
• Common symptoms: won't drain or drains slowly; water left in tub; loud humming/grinding from pump area; leaks around the pump; cycle stops with a drain-related error
• A clogged hose or debris in the pump can mimic failure—inspect for obstructions

• Disconnect power and water supply; wear gloves. Bail or wet-vac remaining water and place towels or a pan to catch spills
• Clamp and remove inlet/outlet hoses; note hose orientation and routing
• Move wiring connector(s) one at a time to the new pump and secure the pump in place
• Ensure hoses are clear and clamps tight; run a drain/spin test and check for leaks

This drain pump assembly removes water from the washer tub during the drain portions of the cycle, helping ensure proper rinsing and spinning and preventing water from remaining in the machine after a wash.

• Pumps wastewater from the tub through the drain hose to the household standpipe
• Common failure symptoms include the washer not draining, water left in the tub, loud humming or grinding from the pump area, or leaks around the pump/hose connections
• Restores proper drainage to support effective spin performance

• Disconnect power and turn off water supply before servicing; bail or wet-vac any standing water
• Keep towels or a pan handy to catch residual water when removing hoses
• Mark hose positions and transfer any existing mounting brackets or connectors from the old pump as needed
• Inspect and reseat hose clamps and the drain hose to ensure a watertight seal before testing

This pump and hose assembly replaces the appliance's drain pump to restore reliable water removal and prevent standing water or leaks. Use this direct-fit assembly when the unit won't drain or you see leaks from the pump area. What it does:

• Pumps drain water from the appliance and routes it out through the drain hose.
• Restores normal drain cycles when a failed pump stops water removal.
• Helps stop water pooling or leaking near the pump area.
• Reduces grinding, humming, or abnormal noises tied to a failing pump.

• Always disconnect power and shut off water to the appliance before servicing.
• Secure hose connections and clamps; check routing to avoid kinks.
• After installation, restore power and run a short drain cycle to check for proper operation and leaks.

This pump and brake assembly drains water from the tub and applies the basket brake in your top-load washer. Replacing a worn assembly restores proper draining and a safe, prompt basket stop between cycles. What it does

• Pumps water out of the washer during drain and spin phases
• Applies the brake to stop the spin basket between cycles or when the lid switch is activated
• Helps reduce extended coast-down and stopping squeal
• Typical symptoms: standing water, slow/no drain, leaking at the pump area, basket coasts too long or squeals when stopping

• One pump and brake assembly

• Disconnect power and water supply; drain remaining water from hoses before service
• Access from the washer's underside; support the unit securely
• Transfer existing hoses/clamps to the new pump and secure all connections; if belt-driven, verify proper belt routing and pulley alignment
• Run a brief fill/drain test and recheck for leaks and proper basket stop

This part is a replacement outer tub. This part's intended use is to repair a broken or defective outer tub in washing machines.The outer tub fits over the spin basket and is what ensures that the machine doesn't leak during use by sealing in the water. If this part is broken, water may drip or leak, and thus the front tub should be immediately replaced. It's important that the appliance is unplugged before any attempt is made to replace this part. Work gloves are recommended for proper safety and protection.This is a genuine OEM part made by Whirlpool and has been sourced directly from the manufacturer. This is an authentic OEM replacement part made of high-quality materials. This outer tub can be used with different models of washing machines that have been manufactured by Whirlpool, KitchenAid, Kenmore, Scotsman, and some other brands. It is sold individually.

This is the water pump that moves water through your appliance so cycles can run correctly. Replacing a failing pump restores proper water flow and helps prevent standing water, poor performance, and leaks. What it does:

• Circulates and/or removes water as the appliance operates
• Supports proper flow so wash/rinse/drain steps can complete
• Maintains a sealed path at the pump connections to help prevent leaks
• Typical symptoms of a failing pump: standing water, weak/no water movement, loud humming or grinding from the pump area, leaks, or related drain/circulation errors

• 1 water pump

• Disconnect power and shut off water supply before servicing
• Have towels/containment ready; some residual water is normal when hoses are removed
• Move wires and hoses one-for-one to the new pump; tighten clamps and check any O-rings/seals
• Run a short test cycle and inspect for leaks and proper water movement

The Drain Pump is an OEM part for Bosch washing machines. It works to remove water from the machine after each cycle is complete, preventing moisture buildup.

Causes of drainage trouble include blockages in hoses restricting water flow or internal pump components wearing down from continuous use and impacting efficiency.

Symptoms of drainage problems are:

• Excess water remaining in tub after wash cycle
• Drain hoses failing to properly empty after spin
• Unusual sounds or vibrations from pump area
• Cycles unable to fully complete

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a Whirlpool washer inner tub spin basket. The spin basket is the portion of the washing machine the clothes are held. This piece must operate efficiently for the items in the washer to be thoroughly cleaned. The main indicators of a damaged spin basket are the loss of the ability to spin or the washer making loud noises due to moving and rattling of the spin basket.Begin installing the new basket by unthreading the screws that fasten the top portion of the washer to the base. Tilt this back, and use a screwdriver to unfasten the clips that hold the top of the tub in place. Remove the fabric softener reservoir from the center of the basket. Use a socket to unbolt the agitator at the bottom of the tub. Once this is removed, reach down and lift out the old tub. Complete these instructions in reverse to install the new unit.This is a genuine OEM part sourced directly from the manufacturer. This product is compatible with Whirlpool, Amana, Roper, Kenmore, and Maytag appliances.

This outer tub is the main water-holding housing for a top-load washing machine. It supports the inner basket and seals the wash chamber, helping the washer contain water and direct proper wash action. What it does:

• Holds wash water and surrounds the inner basket during fill, wash, and rinse cycles
• Supports the inner tub and transmission/agitator assembly for stable operation
• Prevents leaks by maintaining the sealed wash chamber; a cracked tub can cause visible water under the machine
• Helps reduce noise and vibration by keeping the wash components aligned

• One outer tub

• Disconnect power and water supply before beginning any repair
• Drain any remaining water from the tub and remove the washer cabinet or top to access the tub
• Transfer any components (basket, agitator, seals, mounting hardware) only if explicitly listed in your parts list; replace worn seals and gaskets when reinstalling

2 Port. Whirlpool and Kenmore washers.

This pump packing service assembly replaces the worn packing and seals on the pump to help stop leaks and restore normal pump operation. It's a direct-fit service kit for pumps that use a replaceable packing unit. What it does:

• Replaces the pump packing to prevent water from leaking around the pump shaft
• Restores proper pump sealing to help maintain normal water circulation
• Can reduce shaft-related pump noise caused by worn or damaged packing
• Helps avoid further damage to the pump housing from ongoing leakage

• Disconnect power and water supply before starting any repair
• Remove the pump housing and impeller to access the packing
• Inspect surrounding components and replace any damaged seals or worn parts

The DRAIN PUMP is an OEM component specifically designed for GE washers. It is located near the base of the unit and functions to remove water from the wash tub at the end of cycles. The drain pump works vigorously to expel soiled water through the drain hose for hygienic cleaning.  

Symptoms of a bad drain pump include:

• Water remaining in the tub even after cycles have finished running  
• Drain hose that is not effectively carrying away water
• Strange gurgling or churning noises coming from below the unit
• Possible leakage from seals or connections near the drain area

Causes can include internal blockages from built-up debris, wearing of impeller seals or motor, or physical damage impairing pump functionality.

Replace yours today with this genuine OEM GE part for thorough water extraction and machine drainage after every load. This GE replacement part is compatible with Hotpoint, RCA, and select Kenmore models.