Washer Fabric Softener Dispenser Agitator Parts

• Will not agitate
• Spins slowly

I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the... Read more

I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the... Read more

I searched the internet for the most likely cause of the problem and then went to the AppliancePartsPros.com site to see if they had the parts. Naturally they did, but the best part was that they had a video on how to change the part. The video was very clear and straightforward. So easy to follow. I ordered the part mid-day on a Thursday. Imagine my surprise when later that day an email came in letting me know that the part was already shipped! The next day the part was on my front... Read more

Installed new agitator Read more

I looked at videos and read several blogs about my GE GTW460ASJ6WW washer not agitating. They all pointed to changing the Clutch and Washer mode shifter. Pretty easy repair that only took about 15 minutes. The old parts looked ok but changed them anyway. This DID NOT solve the problem. Took a closer examination of the agitator. I could turn the Agitator Base by hand without the drum turning. AHAH, maybe the screw came out? So I tried to get the Auger off to access the 7/16” bolt holding... Read more

I looked at videos and read several blogs about my GE GTW460ASJ6WW washer not agitating. They all pointed to changing the Clutch and Washer mode shifter. Pretty easy repair that only took about 15 minutes. The old parts looked ok but changed them anyway. This DID NOT solve the problem. Took a closer examination of the agitator. I could turn the Agitator Base by hand without the drum turning. AHAH, maybe the screw came out? So I tried to get the Auger off to access the 7/16” bolt holding... Read more

• Shakes and moves
• Noisy
• Pumps but will not spin

Replaced washer drive block and Cam. I called around and finally settled on Appliance Parts Pros because they helped diagnose the problem, told me what parts to replace and had videos to show me how to do it. In completing the repair I had to remove quite a few pieces of hardware in order to get at the part I was to replace. The videos helped but there is a learning curve while you familiarize yourself with the parts and figure out how the remove them. Eventually I got to a large nut that,... Read more

We took the washer apart. and used the online videos (very helpful)! Used the diagram to figure out what to order. Parts came quickly and were packaged well. We put the new pulsator assembly and housing assembly in. Put all the rest of the parts back together and everything is working great! We really were grateful for the help ; ) Read more

I had replaced the Agitator cams a couple of times already due to my brother-in-law overloading the machine which stripped the teeth off of the cams. I also noticed the agitator seemed to 'wobble' and made 'knocking' noises quite a bit. I reviewed the video on the Appliance Parts Pros web site, disassembled the agitator and cleaned everything up, which helped a little, but not enough. Figuring the agitator itself was worn out also, I looked up and ordered all the parts for the upper agitator on... Read more

Ordered agitator. Removed old agitator by prying up one side of the agitator and then moving the agitator around in a circle while prying up a little at a time because the clips pop off underneath separately and once a few of them come loose the remaining slide off making a clean removal rather than the "jerking-straight-up-and-into-your-face-and-neck-disaster-waiting-to -happen removal". Cleaned salt buildup from using brand name household detergent for the last 4 months (currently in rental... Read more

Remove one bolt in the center of the agitator need a long extension, couldn't be any easier. Read more

• Will not agitate

OMG.. I was so excited when I found a simple YOUTUBE video showing me how to fix this agitator myself.. and it was SO SIMPLE! The MEN I know, told me I would need to buy a new machine! I did a simple search for GE AGITATOR REPAIR.. found the video, then did my search for the replacement part - an agitator coupling, which, of course, I found at AppliancePartsPros.com... they shipped it to me within 2 days! And the minute it arrived, I went into my laundry room, and completed my OWN repair in... Read more

I had to cut the old agitator out with an oscillating saw in order to access the agitator drive. This is the second Maytag (MVWC 565) I have had to do this to. I first tried removing it by sliding straps under the agitator then then using a jack to pull it loose which did not work either time. One suggestion I have would be to remove debris from tub as you cut in order to prevent it from dropping from the inner tub into the outer tub. Read more

We had a repair man come and tell us the needed repair at the cost of 70.00 I ordered the parts and saved money. Read more

Pulled the washer apart (using your videos as a refresher) and found that the plastic coupling between the motor and the transmission had failed. Searched for parts vendors and found your site. Ordered the coupling on-line and went back down to clean up the machine. In the cleaning process I found a damaged thrust washer for the upper agitator and broken drive dogs for that same agitator. I went to the website to see if I could augment my initial order. I did not want to pay shipping costs... Read more

Replaced it with a new wash plate. Read more