Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Restore safe, organized loading on the top level. Replacing a damaged upper rack brings back smooth sliding, proper item placement, and dependable use without snagging or collapsed tines.
What it does
What’s included One upper rack assembly.
Install notes
We had to order new racks by calling appliance parts pros. I gave them the model and serial number to order replacement racks with new hardware included. The racks came in 5 business days and I installed the new racks which were OEM. Fit perfect and the dishwasher runs like new. It was that easy. Read more
Seals the bottom of your dishwasher door to prevent water leaks during wash cycles. Replace if you notice pooling water on the floor. Confirm fit with your model.
I went to your web sight. I entered the GE dishwasher model # and found the gasket was available. While looking up the needed gasket I happened to see an applicable how-to replace the gasket video and watched it. It was easy to follow and VERY helpful. As I watched, I wrote down the gasket replacement procedure step-by-step. I ordered the needed gasket and received it in 2 days (AMAZING). The replacement entailed disconnecting the water supply, the power supply and the discharge hose. I removed... Read more
Bring back smooth loading on the bottom level. This lower dishrack replaces bent or rusty racks so dishes sit securely and the rack glides cleanly without snagging or collapse.
What’s included One lower rack assembly.
Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This latch assembly secures the door and activates switches. 5-10 min fix.
After I double checked that the unit did have power to it, I concluded it was probably a switch or the User Interface Board. I found the parts on the AppliancePartsPros for the best price and delivery. After the parts were delivered two days later, it took me a couple hours to disassemble and re-assemble the door for the dishwasher and luckily everything seems to be working fine three days and three loads later. The only issue I had was with the User Interface board..... this is a generic... Read more
Lower dishrack assembly for dishwashers. Holds dishes, pots, and pans during wash cycles. Replace if rusted, cracked, warped, or damaged. Includes wheels.
We ordered a replacement Lower Dishrack KIt which arrived in a very timely manner. I was surprised to see the order included a utensil rack as ours was fine and we had not ordered one. After installing the dishrack, we discovered the old rack was obsolete. It was so nice to realize GE was on top of things in sending the replacement utensil rack instead of me having to order one after the fact. Read more
Seals dishwasher door perimeter to prevent water leaks during operation. Replace if you notice leaking from door sides or bottom. Easy 5-minute install.
I ordered door seal and bottom strip seal: GASKET TUB PLASTIC Number: WD08X22094 GASKET BEACH PLASTIC: WD08X21894 I had done this once previously and removed the door. That was not too bad but trying to put the door back on the hinges by myself was a bit of work. This time I: 1) removed the 2 screws at the bottom of the door. 2) opened the door all the way 3) slowly pulled the door back on the hinges till I could pull out the bottom gasket 4) slid the new gasket back in place 5) pushed the... Read more
Dishes not drying or staying wet after cycle? This heating element heats water during wash and dries dishes after rinse. DIY-friendly replacement part.
I followed the directions on several websites for repairs. The obvious place to start is the heating coil and thermostat. I checked the continuity of the coil and it was good with a reading of almost zero resistance. Next I read that there is no thermostat controls on my GE dishwasher so I followed another webpage that said the Sensor Turbidity Assembly acts like a thermostat so I replaced that. Wasted effort as that switch sensor was OK. Normally it has a light on when it is working, a... Read more
Fix a dishwasher that won't fill with water by replacing the flood switch assembly. This 5-minute DIY repair detects water levels to prevent flooding.
Removed the lower rack, removed the lower wash arm, removed the lower coarse filter, removed fine filter ( still no tools require to this point). Removed two 1/4" head screws with nut driver to then remove float switch, unplugged float switch, plugged in new switch, reinstalled filter, etc. This is a 5 minut job! Read more
Replaces broken or worn lower rack carriers and rollers. Installs on both sides of the dishwasher lower rack to restore smooth gliding along tracks.
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix! Read more
Dishwasher won't drain or leaves standing water? This drain pump kit removes water at cycle end. Common DIY repair taking 15-30 minutes with basic tools.
I viewed youtube videos and followed the instructions on how to determine the cause of the problem. I cleared the lines and poked my fingers in to check for obstructions. But in the end, the drain pump was the problem. The pump came in the mail the next day. The job required the pump and only one of the hose clamps as the original setup has one single ear clamp which can be removed with wire cutters and a standard one which I re-used. There is a wire adapter in the kit that is necessary to... Read more
Dishwasher won't start or has no lights? This control board manages cycles and operations. DIY-friendly repair—located in the door panel.
First I watched Youtubes and decided it was the lower control board, ordered it from Appliance Parts Pros, and got it within 2 days. Installed it and no change. Called Appliance Parts Pros to repair the help line and they were very helpful told me I needed the upper board (UI) so I ordered it got it also in 2 days installed it and everything works perfectly. Appliance Parts Pros is very helpful and prompt in shipping. Highly recommend. Read more
The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.
Symptoms of needing to replace the lower rack roller include:
Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Dishwasher not filling with water or filling too slowly? The water inlet valve controls water flow into the tub. DIY-friendly repair with video guide.
I figured it was the valve, but searching on the Appliance Parts site, somebody said they fixed it by replacing the switch flood assembly. So I order both parts. The Switch Flood Assembly was easiest to replace, so I decided to try that first. When I pulled out the old assembly, I noticed it did not 'rattle', as the new one did. So, there is apparently a float ball that had gotten stuck. I put the new one in and poof.. it worked. The only update to the instructions is a reminder that the... Read more
Dishwasher detergent dispenser won't open or latch? This module controls soap release during wash cycles. Moderate DIY repair—30 minutes, door removal.
Tried CLR to remove hard water deposits. That did not help. Ordered new dispenser. The GE series that the detergent module fits in was a little difficult to open. Finally found a video explaining the whole door had to come off in order to open it up to replace the module. Works great now. Read more
Fix a dishwasher that won't start, beeps but doesn't run, or has no display lights with this electronic control board. Moderate DIY repair.
The circuit board under the machine needed replacing. Pretty easy if you are willing to not force it in. Two screws, four all different plugs, two guide holes for the wiring. I bought a latch but did not need to install it. Read more
Replacement end cap for dishwasher rack rails. Prevents upper or lower rack from sliding off when pulled out. Needed when cracked, broken, or missing.
Turn off the power , pull dishwasher and replaced the new one . It is working now Read more