Kdrp487mss02 - Side Side 48” Oven Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10131825
The Oven Temperature Sensor is an OEM part for Whirlpool ovens. This component is responsible for monitoring the oven's internal temperature, sending data to the control board to maintain the desired cooking temperature. It ensures accurate temperature readings, which are essential for baking, roasting, and other cooking functions.
Causes of a bad Oven Temperature Sensor include prolonged exposure to high temperatures, which can degrade its responsiveness over time. Additionally, physical damage or wear and tear can lead to inaccurate temperature readings.
Symptoms of a bad Oven Temperature Sensor include:
- The oven temperature is inconsistent with the setting.
- Food is not cooking evenly or as expected.
- The oven fails to reach the set temperature, or it overshoots it significantly.
- Error codes related to temperature regulation appear on the oven's display.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Dead control panel. Oven would not start. Mike H. • Cotopaxi , CO • April 12, 2022
I have a Whirlpool RBS245PDQ12 wall mount oven. Gathering information from AppliancePartsPros.com resulted in two possibilities: The Thermal Switch or the Control Panel. Talking with Appliance Parts Pros led to testing the Oven Temperature Sensor. It's supposed to test at 1080 Ohms at 70 degrees Fahrenheit. Mine tested at 960 Ohms so I knew it was bad... I found the service manual on the top of the Oven on the left behind the control panel. It has values for testing (Ohms of resistance)...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760771
The Broil Element is an OEM part for Whirlpool ovens. This element is located at the top of the oven and provides the high heat necessary for broiling food.
Causes of a faulty Broil Element can vary. One indicator is visible damage like blistering, bulging, or breaks in the element. Another sign could be a lack of heat when the broil function is turned on, which might signal a burned-out element. If the element is constantly tripping the circuit breaker, it could point to an electrical issue.
Symptoms of a malfunctioning Broil Element include:
- Food not broiling or browning properly.
- The oven not reaching the set temperature or taking longer than usual to heat.
- Unusual electrical odors or sparks coming from the element area during use.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broil Heating element shorted. Noel D. • Palmdale , CA • March 28, 2014
Found a real cool Youtube video by AppliancePartsPro.com. I watched it and learned how easy it was to unhook and replace the part with proper care and precautions. It even included tips on critical steps so the wires won't slip back inside the hole and save you from hours of possible mistake. Then I ordered the part. It came the day after, then I replaced the part, meaning, I DID THE WORK! (My wife was so impressed- lol) Easy as pie... but we made and had a much nicer roast the day after....
Read more
More
$87.22
- Compare At:
-
$103.79
- You Save:
-
$16.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9759242
The Thermal Fuse is an OEM part for Whirlpool ovens. It acts as a safety device that cuts off power to the oven if it overheats, preventing potential damage or fire hazards.
Causes of a bad thermal fuse can include prolonged exposure to high temperatures, electrical surges, or faulty oven components that cause overheating. When the fuse blows, it disrupts the electrical circuit, rendering the oven inoperative until the fuse is replaced.
Symptoms of a bad Thermal Fuse include:
- The oven not heating up
- The control panel not lighting up
- The oven not turning on at all
- Sudden shutdowns during operation
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Door won't open after self cleaning cycle
-
Element will not heat
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Stopped working while in self cleaning mode. Eberhard L. • Raleigh , NC • March 17, 2023
This is for the Whirlpool in-wall double oven GBD307PDS10. No power and the door locked after the shutdown before the self-cleaning cycle was over. I watched some video and this is a known issue the fuses blow during self-cleaning.
I opened the door with a 90-degree hook, an easy task. Took doors off (watch video from others), unscrewed from the wall, and made a very small platform. and took the oven out (need two people and take the doors off first. The doors are heavy and you won't lift the...
Read more
More
$56.64
- Compare At:
-
$68.79
- You Save:
-
$12.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3368921
The Torx Screw is an OEM replacement part for Whirlpool brand appliances. The Torx Screw is responsible for providing secure and stable connections between different components of washing machines, dryers, dishwashers, and more. These screws are characterized by their star-shaped drive design, which offers better torque transfer and reduces the risk of stripping or cam-out. Sold individually. 7-18 x 3/4"
Causes of a bad Torx screw can include stripping of the screw head, rust or corrosion from prolonged exposure to moisture, or damage from over-tightening or cross-threading. A compromised screw can lead to loose or insecure parts, which can affect the performance and safety of the appliance.
Symptoms of a bad Torx screw include:
- The screw head being stripped and difficult to turn
- Rust or corrosion visible on the screw
- The screw not holding components securely
- Loose or rattling parts within the appliance
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Two of the ignition electrode was not working and the torx screws holding the burner assembly were rusted so badly they are broken during dissassembly Huseyin K. • Auburn , AL • October 27, 2014
I have tried to remove the burner assemblies by removing the torx screws but they were badly rusted, and unfortunately they all were broken during removal. I just discarded the ruined orifices and assembled the new orifices and burner assembly.
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4452164
The Light Bulb is an OEM replacement part for Whirlpool ovens. As an important illumination component, it works to provide clear visibility inside the oven cavity during cooking. The 5-watt, 12-volt halogen bulb illuminates the interior for easy food monitoring.
Symptoms of a bad light bulb include:
- Dim or inconsistent lighting inside the oven
- The bulb failing to turn on at all
- Increased difficulty seeing food while baking
Normal wear dictates the average lifespan before filaments burn out. Choosing a genuine Whirlpool replacement prolongs safety and usability by preventing cooking blindness.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore oven models.
Do-It-Yourself Stories from Customers like You
Burnt out interior oven lights Cheryl L. • North Zulch , TX • October 18, 2014
One would think replacement appliance light bulbs would be a staple In Service departments of appliance stores, not so. I decided to travel to several local parts and service departments to pick up six of the little bulbs. Guess what? no one had them in stock! Time, energy spent - mission NOT accomplished. Once again, I turned to AppliancePartsPro.com. Et voila! They bulbs were in stock AND arrived the next day! YEA! Fast, simple service. Instant Success! Who could ask for anything more?
Read more
More
$51.23
- Compare At:
-
$60.96
- You Save:
-
$9.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10110491
The Whirlpool spark module is an OEM replacement part responsible for controlling the ignition and sparking of the gas burners in a Whirlpool range or cooktop. The spark module is typically located behind the control panel or near the burners, and it generates the electrical sparks needed to ignite the gas for cooking.
Causes of a bad module can include electrical surges, physical damage, or simply wear and tear over time.
This part fixes the following symptoms:
- Gas burners fail to ignite or have weak or inconsistent sparks
- Continuous sparking even after the burner is lit
- No spark at all when attempting to ignite the burners
- Unresponsive or non-functional burner control knobs
- Visible damage, such as burn marks or corrosion, on the spark module
The Whirlpool spark module can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Bad spark module Dovie D. • Paradise , CA • August 25, 2014
Replaced module:
Although the new module was slightly different due to a third or ground terminal that was not on the original I managed to figured out that I did not need to worry about the ground since the existing wiring had already allowed for the connection. Easy repair.
I ordered the part one day and it was delivered the next and that was using the least expensive delivery service.
You guys are great
Read more
More
$122.70
- Compare At:
-
$147.24
- You Save:
-
$24.54
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449154
The Whirlpool element mounting screw is an OEM replacement part responsible for securely fastening the heating element to the designated location inside the oven. This part ensures that the heating element remains firmly attached to the appliance's structure. The element mounting screw is crafted from durable materials to withstand high temperatures to provide a reliable and stable connection between the heating element and the oven.
This part fixes the following symptoms:
- Loose or wobbly heating element
- Uneven heating inside the oven
- Excessive vibrations or rattling noises during operation
The Whirlpool element mounting screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Our broiler coil had a blister in it and wasn't working Stephanie M. • Brentwood , TN • September 10, 2016
We ordered the part and one extra screw(which we didn't end up using). If possible take door off your oven for easy access and have lighting source to see well. Taking part out was easy. Putting back in was more difficult because you have to match up two layers of parts in our oven. The broiler coil and the broiler shield above it. We used small craft clothes pins to keep wires from going behind the built in oven. We used a small diameter screw driver to match up holes before putting...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195934
The Door Latch is an OEM replacement part for Whirlpool ranges. It is the mechanism that securely holds the range door shut during cooking operations.
Causes for a bad door latch can include wear and tear of moving parts over time exposing them to high heat, improper cleaning allowing residue to build up and corrode components, or physical damage like bending from excessive force on the door.
Symptoms of a door latch issue include:
- Inability to fully close the range door
- Sagging or loose door that does not feel secure during baking and broiling
- Door that will not safely stay shut on its own
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Said door was open even when it was close Connie S. • River , KY • August 11, 2016
Replaced the latch. Everything works fine now
Read more
More
$151.77
- Compare At:
-
$180.61
- You Save:
-
$28.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4448933
The Gasket Retainer is an OEM part for Whirlpool ovens. It secures the oven door gasket in place, ensuring a tight seal that prevents heat from escaping during cooking. This helps maintain consistent cooking temperatures and improves energy efficiency.
Causes of a bad oven gasket retainer can include wear and tear from repeated use, heat damage, or accidental impact that causes the retainer to break or become misshapen.
Symptoms of a bad oven gasket retainer include:
- The oven door gasket not staying in place
- Heat escaping from the oven, leading to uneven cooking
- Visible damage or deformation of the retainer
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Heat loss due to old worn door gasket door insulation damaged Raymond M. • Mundelein , IL • February 09, 2016
Replacing the Door Gasket is very easy and will take about 2-3 mins per door. Simply remove the Gasket Retainer (1 screw), and pull off the old Gasket. Install the new gasket by simply pushing the gasket clips into the holes where the old clips came out from. Be sure to start gasket at the first hole either side of the Gasket Retainer and work your way around. Reinstall Gasket retainer.
The Door Insulation is a very involved repair, and best to follow specific repair manual instructions. Door...
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 4451175
The Bake Element Kit is an OEM part for Whirlpool ranges. It is designed to provide the necessary heat for baking and roasting within the oven cavity. This element is located at the bottom of the oven and heats up when electricity passes through it, creating the right cooking environment for even and effective baking.
Causes of a bad bake element can include a burnout from age or overuse, where the element can physically break or develop hot spots resulting in uneven cooking. Corrosion or residue build-up can also impact its performance, leading to inadequate heating.
Symptoms of a bad Bake Element Kit include:
- Lack of heat production in the oven
- Uneven cooking or baking
- Visible damage to the element, such as blistering or splits
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven had a burnt out hidden bake element and was not heating properly Christopher A. • Auburn , AL • April 23, 2017
Following the instructions that I received through the helpful research of the APP staff, I disconnected the power, disassembled the back of the oven, and accessed the hidden element. This involved bending parts of the sheet metal and cutting the insulation, so I was very apprehensive about doing this. Once I exposed the compartment that contains the element, I had difficulty extracting the old part and was really nervous about pulling hard to extract it - until I saw the damaged element. It...
Read more
More
$110.69
- Compare At:
-
$132.83
- You Save:
-
$22.14
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400832
Screw for side trim.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: W10491987
This foam seal fits between mating parts to create a tight barrier that helps prevent leaks and rattling. Replacing a worn or missing seal restores proper sealing and helps keep your appliance running quietly. What it does:
- Creates a compliant gasket between components to limit air or moisture passage
- Helps dampen vibration and reduce rattling/buzzing where parts meet
- Helps maintain proper airflow or fluid routing as designed
- Typical symptoms include leaks, condensation/frost near a joint, or new vibration noises
What's included:
Install notes:
- Disconnect power; turn off the water supply before service
- Note the original seal's routing/orientation before removal
- Clean and dry all mating surfaces; remove old foam and residue
- Install without stretching or over-compressing; ensure even contact with no gaps
Do-It-Yourself Stories from Customers like You
Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary.
IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449809
This factory replacement screw secures panels, brackets, and covers in your appliance. Replacing missing or stripped hardware restores a solid fit, reduces vibration and rattles, and keeps components properly aligned during everyday use. What it does:
- Fastens panels, trim, brackets, and internal components to the cabinet or chassis
- Helps maintain alignment and reduce vibration or rattling noises
- Replaces missing, rusted, or stripped screws discovered during service
- Matches the OEM spec for locations where this part is called out on your model's diagram
What's included: 1 screw Install notes:
- Disconnect power (and gas or water, if applicable) before servicing
- Use the appropriate driver; start threads by hand to avoid cross-threading
- Tighten snugly—do not overtighten to prevent stripping metal or plastic
- Replace hardware one screw at a time to keep parts aligned
Do-It-Yourself Stories from Customers like You
Broken outer glass on lower oven door James F. • Durham , NC • May 03, 2015
I recently shattered the outer glass on my Whirlpool oven door. (Side note for lesson learned...don't swat at a fly with a broom when its on the oven door. I didnt swing hard just a love tap but thats all it took ha ha) The toughest part of the fix was removing the broken glass as it had shattered into hundreds...no thousands of pieces. Thankfully it was taped on the inside and that held some of it together. I placed the door in our garbage can and put on a pair of gloves with a scraper to...
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 4448716
This oven rack restores a stable, level surface for cookware and slides smoothly on the cavity rails. Replace a bent, rusted, or missing rack to ensure safe support and proper positioning for baking, roasting, and broiling.
- Provides a sturdy, level platform for pans and dishes inside the oven
- Slides on side rails so you can adjust rack height as needed
- Replace if bent/warped, rusted, or if the original rack is missing
- Common symptoms include binding when sliding, tilting, or inability to sit level
What's included: 1 oven rack Installation notes:
- Disconnect power and allow the oven to cool completely before working inside
- Pull the old rack forward to the stop, lift the front to clear the stop, and remove
- Align the rear of the new rack with the guides, lower into the rails, and slide fully in
- Remove racks before running a self-clean cycle to minimize discoloration and preserve smooth sliding
Do-It-Yourself Stories from Customers like You
Missing part Matthew M. • Saint Louis , MO • November 23, 2014
Rack fit perfectly in the oven.
Read more
More
$95.66
- Compare At:
-
$113.84
- You Save:
-
$18.18
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8203546
This terminal block is the insulated connection point where the appliance's incoming power ties into the internal wiring. Replacing a heat-damaged or loose block restores a safe, reliable electrical path and helps prevent arcing and intermittent power loss.
- Connects the supply conductors to the unit's internal wiring
- Provides insulated posts to securely fasten and distribute power
- Helps maintain tight, low-resistance connections
- Common failure signs: melted/discolored plastic, burned or loose terminals, arcing, scorching, or intermittent/no power after confirming the cord and breaker
What's included: 1 terminal block Install notes:
- Disconnect power at the breaker or unplug the appliance; verify no voltage before servicing
- Photograph or label wire positions to ensure correct reassembly
- Inspect and replace any heat-damaged wire ends or lugs; use appropriate terminals
- Tighten connections securely and ensure wires are fully seated and strain-relieved as originally installed
Do-It-Yourself Stories from Customers like You
Bad terminal block Michael M. • Ronkonkoma , NY • June 29, 2015
Replaced it with the part I got from you.
Read more
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59