Magicchef Ces3759bcw Range - S/C S/I Ele Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001656
The Oven Temperature Sensor Kit is an OEM part for Whirlpool ovens. This sensor is essential for monitoring the oven's internal temperature, ensuring that it reaches and maintains the correct temperature for baking and cooking. The sensor is approximately 7 inches long.
Over time, the oven temperature sensor can fail due to repeated heating and cooling cycles, exposure to spills or grease, or electrical issues. When the sensor malfunctions, it can result in inaccurate temperature readings, affecting cooking performance and food quality.
Symptoms of a bad oven temperature sensor include:
- The oven not reaching the set temperature
- Food cooking unevenly or not fully
- The oven overheating or underheating
- Error codes related to temperature issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Won't start
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. Joe D. • New Berlin , WI • March 20, 2019
First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on...
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10245259
The Terminal Block is an OEM part for Whirlpool ranges. It serves as a crucial connection point for the range’s electrical wiring, ensuring a safe and reliable transfer of power to the appliance.
Over time, terminal blocks can deteriorate due to factors such as heat exposure, electrical surges, or wear and tear. When the terminal block becomes damaged or corroded, it can lead to poor electrical connections or potential safety hazards.
Symptoms of a bad terminal block include:
- Burnt or scorched connections
- Intermittent power loss to the range
- Difficulty in the range heating up properly
- Visible damage or corrosion on the terminal block
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Oven would only heat up to 347° f in bake mode Chris M. • Scottsdale , AZ • October 25, 2021
I determined the hidden bake element below the oven cavity was not working, because the bottom of the oven was cold during normal use. If you have a built-in microwave + oven combination (mine is KitchenAid Model No. KEMS308SSS05), this is a difficult repair. The engineer who designed this oven should be invited to succeed elsewhere. It is impossible to access the bake element from the inside of the oven, so the How To video associated with this part will not help you. I had to remove the...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10310274
The Oven Bake Element is an OEM part for Whirlpool ovens. It is responsible for providing the heat required for baking by generating radiant heat at the bottom of the oven cavity. This element ensures that the oven reaches and maintains the desired baking temperature, contributing to consistent and even cooking results.
Causes of a bad bake element can include regular wear and tear, overheating, or physical damage such as cracks or breaks in the element itself. A malfunctioning bake element can lead to uneven cooking and longer preheat times.
Symptoms of a bad oven bake element include:
- Oven not heating or taking a long time to preheat
- Uneven baking results
- Visible damage or burning on the element
- The element not glowing red when in use
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven would not reach set point temp it would only reach about 250 f Kenneth M. • Olive Hill , KY • June 27, 2016
Took out the old element and checked with olm meter determined bad, no continuity. Orded new Element from Appliance Parts Pros. Had new one in less than 2 days easy fix.
Read more
More
$85.56
- Compare At:
-
$101.82
- You Save:
-
$16.26
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7403P239-60
The Whirlpool Infinite Switch is an OEM part for Whirlpool ranges. Whirlpool electric ranges. This switch controls the multiple heat settings of the large element, allowing the user to select their desired cooking temperature. It is an important electrical component that regulates burner heating cycles.
Symptoms of a bad infinite switch include:
- The element not heating up adequately or failing to maintain temperature
- Inability to select or change heat settings on the
- Burner operates intermittently or fails to heat properly
Causes of a bad infinite switch can include failure over many heating cycles. The electrical contacts within the switch may become corroded or deteriorate from repeated exposure to cooktop temperatures and cooking residue.
It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric range models.
Do-It-Yourself Stories from Customers like You
The right front "large' heating element was in high heat mode rotating the control knob to a lower heat setting would not reduce heat Jack D. • Roanoke , VA • November 17, 2014
1. Went online where I watched video about heat control for this Maytag. I then found AppliancePartsPros using Google. I ordered the part and In three days the part arrived. I installed the part and now the problem has been corrected.
Read more
More
$34.95
- Compare At:
-
$50.69
- You Save:
-
$15.74
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10162384
The Oven Door Gasket is an OEM part for Whirlpool ovens. This gasket is essential for maintaining a proper seal around the oven door, preventing heat from escaping and ensuring efficient cooking performance. The gasket measures approximately 76.66" in total length with a diameter of about 0.47", it features 25 built-in metal retaining clips.
Causes of a bad oven door gasket can include regular wear and tear, exposure to high temperatures over time, or accidental damage from cleaning or handling. A compromised gasket can lead to heat loss, which affects cooking times and energy efficiency.
Symptoms of a bad oven door gasket include:
- Heat escaping from the oven door
- Longer cooking times
- Visible cracks or tears in the gasket
- The oven door not closing properly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Door won't close
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. Joe D. • New Berlin , WI • March 20, 2019
First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on...
Read more
More
$70.45
- Compare At:
-
$84.54
- You Save:
-
$14.09
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823711
The Surface Element is an OEM component for Whirlpool ranges. It is responsible for heating the cooktop surface to the desired temperature selected by the user. Made of durable metal coil construction, the element surface quickly distributes heat evenly across burners to boil, sauté or simmer foods effectively.
Causes of a bad element includes baked-on grime or mineral buildup inhibiting heat transfer or damage due to the use of improper cookware that has cracked or warped the coils over time.
Symptoms of a bad element includes:
- Burners failing to heat up fully or taking a long time
- Inconsistent or uneven heating across coils
- Hotspots or deadzones in cooking areas
- Visible damage like cracks or bends in coil construction
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, and Kenmore range models.
This part fixes the following symptoms
-
Element will not heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Burned out element on ceramic top range Charles P. • Marietta , OH • September 13, 2014
Turned off power supply. Removed two screws (near the oven door) holding the ceramic top. Slid the top forward, disengaged the two power supply cables, and removed one ground wire. Removed range top, and put on a flat surface. Unclamped two power supply wires, one ground wire and one thermocouple wire from the element. Unscrewed the bracket from the element, and remove the element from the range top. Remove the two clamps from the old element, and put them on the new element at the same...
Read more
More
$133.32
- Compare At:
-
$159.98
- You Save:
-
$26.66
Genuine Whirlpool part
By: Whirlpool
Part Number: 74003645
The Oven Inner Door Glass is an OEM part for Whirlpool ovens. The glass component is specially tempered to withstand high heat inside the oven cavity.
Size: 20 5/8 inches x 13 1/8 inches. For the glass measuring 22 3/8 inches x 14 inches order 74004857
Causes of a bad oven inner door glass can include small cracks or chips developing from regular door openings/closings, or microscopic defects that enlarge under repeated thermal cycling. Damage from accidental impacts is also possible.
Symptoms of a bad Oven Inner Door Glass include:
- Reduced visibility into the oven due to fogging, steam, or condensation buildup
- Cracks or fractures compromising the structural integrity of the glass
- Leaks or seal failure allowing heat to escape from around the door frame
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken inside glass on oven Terry R. • Menomonee Falls , WI • June 17, 2014
DIY. The delivery to Milwaukee took two days. The project was very easy and took about 1hr. The only tools required were a screw driver (electric) and a pliers. Just make sure your irganized with the screws so you don't lose any or mix up which ones go back in which holes. There's about 20 total screws. This $50 part saved me from having to buy my wife a $1000+ oven.
Read more
More
$100.32
- Compare At:
-
$119.38
- You Save:
-
$19.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10282492
The Oven Rack is an OEM part for Whirlpool ovens. It provides a sturdy and reliable surface for baking and roasting a variety of dishes. Designed to fit perfectly within Whirlpool models, this rack ensures optimal air circulation around the food, contributing to even cooking and browning.
Causes of a bad Oven Rack can include warping or damage from high heat, rusting from moisture exposure, or general wear and tear over time. Misshaping or instability can also result from placing too much weight on the rack or using it inappropriately.
Symptoms of a bad Oven Rack include:
- Difficulty sliding the rack in or out.
- Uneven cooking or baking due to improper leveling of the rack.
- The rack does not fit securely in the oven slots.
- Visible rust or damage, which could potentially contaminate food.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven racks no longer shiny Ron N. • Menomonee Falls , WI • September 15, 2014
Appliances will be sold with the house so the old oven racks were no longer shiny. Replacement racks present a better looking oven.
Read more
More
$52.32
- Compare At:
-
$61.74
- You Save:
-
$9.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7403P238-60
The Whirlpool Infinite Switch is an OEM part for Whirlpool ranges. Whirlpool electric ranges. This switch controls the multiple heat settings of the small element, allowing the user to select their desired cooking temperature. It is an important electrical component that regulates burner heating cycles.
Symptoms of a bad infinite switch include:
- The element not heating up adequately or failing to maintain temperature
- Inability to select or change heat settings on the
- Burner operates intermittently or fails to heat properly
Causes of a bad infinite switch can include failure over many heating cycles. The electrical contacts within the switch may become corroded or deteriorate from repeated exposure to cooktop temperatures and cooking residue.
It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric range models.
Do-It-Yourself Stories from Customers like You
One of the burners had stopped heating up Elaine H. • Missoula , MT • February 01, 2015
I used your chat and found out the year my stove was made. He also told me what part to order as one of the burners had stopped heating up. We watched the video on how to install it. My friend installed it and my stove burner now works.
Read more
More
$41.95
- Compare At:
-
$57.96
- You Save:
-
$16.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7406P218-60
This electric broil element sits at the top of the oven cavity and provides the high, direct heat needed for broiling. Replace it to restore reliable top-down heating when the broiler won't heat or browns food unevenly. What it does:
- Delivers intense radiant heat from the top of the oven during Broil
- Engages for searing/browning; may also cycle during preheat on some models
- Common failure signs: no broil heat, weak or uneven browning, element doesn't glow, or visible blisters/cracks on the coil
What's included:
Install notes:
- Disconnect power at the breaker and allow the oven to cool completely
- Remove oven racks, take out mounting screws, and gently pull the element forward
- Transfer wires one at a time; support leads so they don't slip back behind the liner
- Ensure terminals are fully seated, secure the element, restore power, and test broil
Do-It-Yourself Stories from Customers like You
Broiler worked intermittently Larry W. • Navarre , FL • July 13, 2014
Ordered part and installed it. Broiler works as advertised.
Read more
More
$83.95
- Compare At:
-
$99.06
- You Save:
-
$15.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74006515
The Oven Door Panel Screw is an OEM replacement part for Whirlpool ovens and ranges. It is a component used to fasten the outer panel to the interior metal door frame.
Causes of a bad oven door panel screw can include normal wear from repeated opening and closing of the door, damage such as stripped threads from overtightening, or corrosion over time inhibiting its fastening function.
Symptoms of a bad oven door panel screw include:
- The outer panel becoming loose, wobbly, or detached
- Gaps appearing around the door seam
- Scratches or other damage to the door panel
- Reduced insulation quality of the door assembly
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Door handle of upper oven broke off Jodi G. • Oak Park , MI • December 01, 2014
Start by removing the frame on the sides and bottom of the door. (Do not unscrew the corner screw holding the side frame and bottom together.) Be careful the glass will fall once the last screw is removed from the bottom so hold tight. Carefully remove glass and set aside. Remove top frame that held the handle. Once all the frame work and outer glass is removed unscrew the bracket that held the door handle from the door. Taking the top frame and bracket insert screw and washer and screw the...
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823696
The Surface Element is an OEM replacement part for Whirlpool ranges. It is responsible for generating heat on the cooktop, allowing for efficient and even cooking. This component is designed to provide adjustable heat levels to accommodate various cooking needs, from simmering to boiling.
Symptoms of a bad Surface Element include:
- Inconsistent heating or failure to heat up
- Visible damage or wear, such as burns or warping
- Electrical issues, like sparking or short-circuiting
Causes for a malfunctioning Surface Element can be attributed to electrical failures, prolonged use at high temperatures, or physical damage due to spills and overflows.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Surface element burned out Richard G. • Wilkes-Barre , PA • December 12, 2015
It was very easy caled up ordered the part no prblem got it in 3 days.Got a phillips screw driver removed the top of the stove took out the old one a put in the new one had it fixed within minutes very easy diy no need to pay someone alot of money for this easy fix.
Read more
More
$108.30
- Compare At:
-
$144.41
- You Save:
-
$36.11
Genuine Whirlpool part
By: Whirlpool
Part Number: 74011142
This left-side oven door hinge supports the door and controls its spring-loaded movement so it opens smoothly and closes firmly, helping maintain a tight seal and consistent cooking performance.
- Provides spring tension and a pivot point for controlled opening and closing
- Aligns and pulls the door fully closed against the gasket
- Restores smooth, even door movement
- Common symptoms of a worn hinge: door won't close fully or sags; slams/falls open; feels loose or stiff; heat escaping or oven light staying on
What's included: 1 left-side door hinge assembly Install notes:
- Disconnect power and let the oven cool completely before servicing
- Support the door; engage hinge locks or remove the door at the stop position per your model
- Springs are under tension—use gloves and caution
- After installation, verify alignment and that the door closes and seals properly
Orientation: "Left" is determined when facing the appliance from the front.
Do-It-Yourself Stories from Customers like You
Broken spring on oven door Phil H. • Kirkland , WA • February 07, 2016
The replacement hinge unit arrived in just two days. The JennAire (Maytag) oven door is fairly typical in that it easily lifts off of the hinge bars. Once the door is off then removing two screws is all that's required to remove the hinge unit from the oven. The new hinge slides up into place and while you hold it up inside of its location putting the old screws back in is very easy. After sliding the door back down onto the hinge bars the oven is as good as new
Read more
More
$85.43
- Compare At:
-
$100.81
- You Save:
-
$15.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4159193
Size: 10-24X5/16-NI
Do-It-Yourself Stories from Customers like You
Hinges were weak Don M. • Colchester , VT • December 31, 2016
Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair.
Read more
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74004153
This indicator light installs in the control panel and illuminates when its corresponding function is active. Replace a failed lamp to restore clear status indication, so you can see at a glance when the appliance is operating.
- Lights to indicate a selected function is on (e.g., surface units or oven circuits—varies by model)
- Provides visual confirmation of appliance status during use
- Common symptoms: light will not turn on, stays on constantly, flickers, or the lens is damaged
- Restores proper visual feedback when controls are engaged
What's included: One indicator light assembly Install notes:
- Disconnect power at the breaker before servicing; allow the appliance to cool
- Access the console/control panel and remove the rear cover as needed
- Note wire positions; transfer leads to the new light and secure it in the panel opening
- Reassemble and restore power to test operation
Do-It-Yourself Stories from Customers like You
The burner element was bad on the left front Vernon G. • Simsbury , CT • May 07, 2016
I ordered the replacement part and undid two screws on the front of the cooktop then used a nut driver to undo the clamps holding the burner in.I took a picture of the wiring then used needle nose pliers to gently pull the connectors off the terminals. reinstalling you just line up the new burner with the old one and screw the clamps back on. there are no predrilled holes the screws just bite into the insulation.
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89