Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Removes chlorine, lead, and mercury for clean, fresh-tasting water. Replace every 6 months or when flow decreases. Confirm fit with your model number.
I called your company with the serial number of the fridge, and had the best service locating the exact items i needed. I placed by order . and company called to confirm my order and the method of my payment. Thank you very much Read more
Ice maker producing broken cubes or leaking? The ice cube tray often cracks over time. Simple DIY repair—remove 2 screws, unplug, and replace. Video guide.
The amount of water being dispensed into the ice cube tray was excessive, causing overflow of the tray. The water then ran into the collection bin and even down the side walls of the freezer creating a huge block of ice in the bin, and ice all over the lower shelves as well. The excessive build up of ice caused the cube tray to crack and also split the little silicone water grommet that connects to the water delivery tube which directs water into the cube tray. Look out for that little tube... Read more
Replacement crisper drawer for Samsung side-by-side refrigerators. Installs in fresh food compartment. Needed when original is cracked, broken, or damaged.
Found model number/make and went online to compare replacement drawers after my three year old slammed the door on the drawer and smashed it to peices. Found your site was the best price point and cost to replace and had an easy compatibility search engine to make sure. Ordered the new drawer got it in about two business days and replaced the smashed one. Read more
Replaces broken or missing handle mounting stud that secures refrigerator door handles. Installs into door to hold handle firmly in place.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
Plastic cover that protects the ice maker temperature sensor. Replaces broken, cracked, or missing covers to secure the sensor wire and foam insulation.
Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket... Read more
Ice maker not dumping ice or only works when reset button is pressed? Replace the complete ice maker assembly. Takes 5-10 minutes with just a screwdriver.
Replaced with new assembly and still did not work. Was waiting on repairman and decided to unplug the refrigerator as a reboot. After one minute of no power the reset button worked and now it makes ice. Not sure what fixed it except reboot. Read more
Freezer not cooling or fridge showing fan error? Your evaporator fan motor may have failed. This motor circulates cold air throughout your refrigerator.
The blower motor that circulates air through the refrigerator was broken. I had to remove all the shelving and drawers from the refrigerator. Then I had to remove the plastic light cover from the center of the fridge. Then I removed all visible screws to uncover the evaporator/radiator. I then unplugged the light bulb and motor wires. Luckily all wiring is keyed so that it can be plugged in again without error. I removed the motor by opening the motor housing. The housing has 1 screw and... Read more
Replaces cracked or clogged drain cap assembly in refrigerator compartment. Installs behind rear wall to prevent water buildup under crisper drawer.
Found one of the drain valves was clogged causing condensation to overflow on the floor behind the refrigerator. Order the parts on Monday morning and they arrived tuesday afternoon. Replace both of the valves in 15 minutes. Easy repair and save a bundle over a service call. Read more
Freezer won't cool below 50°F or has frost buildup? This defrost sensor regulates temperature readings. Moderate DIY repair for most home models.
Sensor near coils replaced did not need anything else. Read more
Ice maker stopped working or water dispenser won't stop? A faulty water inlet valve often causes these issues. Simple 15-20 minute DIY repair with video help.
The repair job took me less than 15 minutes. I removed the lower back panel from the back of the fridge then disconnected the power to the fridge and turned off the water supply to the fridge. I then looked closely at how the water valve 2-way was installed and removed it. Then I connected the water supply lines for the water and ice then connected the water valve line and I was done. It was that simple. Saved an appliance service call of about $100. and did the job myself. Read more
Ice maker producing clumped cubes or ice sheets? The temperature sensor bracket ensures proper ice formation. Simple DIY fix with video guide available.
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
Ice maker not working or door not closing properly? This refrigerator door interlock switch detects door position to control ice production. DIY-friendly fix.
Replacement lower vegetable crisper drawer for side-by-side refrigerators. Installs in the fresh food section. Needed when original is cracked or broken.
Bought a new vegetable drawer. Read more
Maintains airtight seal on freezer door to prevent air leaks and frost buildup. Replace if door won't stay closed or ice forms inside. Verify fit.
Replaced it. Read more