Wdg4850bwd Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Frigidaire part

Dryer Drum Belt

4.9 (681)

By: Frigidaire

Part Number: 134503600

The Dryer Drum Belt is an OEM replacement part designed for use with Frigidaire dryers. This critical component is responsible for turning the drum of your dryer, allowing your clothes to tumble freely and dry evenly.

Causes of a bad Dryer Drum Belt can include wear and tear from regular use, overloading the dryer, which puts extra strain on the belt, or exposure to excessive heat, which can cause the belt to become brittle and break.

Symptoms of a bad Dryer Drum Belt include:

The dryer motor running but the drum not turning
Unusual noises, such as thumping or squealing, coming from the dryer when it is running
The dryer not starting at all, in some cases

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, ensuring a wide range of users can benefit from its reliable operation.

NOTE: Please note that this dryer drum belt is sold individually. Any additional parts or hardware will require additional purchases.

This part fixes the following symptoms

Will not tumble

Do-It-Yourself Stories from Customers like You After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016

I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing. I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation. I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years... Read more

$14.95

Compare At:: $17.79
You Save:: $2.84

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Rear Drum Bearing Kit

4.9 (874)

By: Frigidaire

Part Number: 5303281153

The Rear Drum Bearing Kit is an OEM replacement part for Frigidaire dryers. It contains a set of parts responsible for supporting the rear end of the dryer drum, allowing it to rotate smoothly and efficiently during the drying cycle.

Symptoms of a faulty Rear Drum Bearing Kit include:

Excessive noise or grinding sounds coming from the rear of the dryer
Difficulty in rotating the drum or drum not turning at all
Visible signs of wear or damage on the existing bearings
Increased vibrations or shaking during the drying cycle

Causes of needing to replace the rear drum bearing kit can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or overloading.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models.

NOTE: The metal plate holes are not threaded. Use the self-tapping screws provided in the kit to thread the plate.

This part fixes the following symptoms

Noisy
No heat or not enough heat
Marks left on clothes

Do-It-Yourself Stories from Customers like You After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016

$44.95

Compare At:: $53.49
You Save:: $8.54

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Drum Bearing

4.9 (80)

By: Frigidaire

Part Number: 131825900

The Dryer Drum Bearing is an OEM part for Frigidaire dryers. It supports the dryer drum, ensuring smooth rotation during the drying cycle. This part attaches to the inside of the rear panel of the cabinet, offering support to the dryer drum.

You should replace the drum bearing if it becomes worn out or damaged. Causes of a bad drum bearing can include normal wear and tear, overloading the dryer, or lack of lubrication.

Symptoms of a bad drum bearing include:

Loud squeaking or grinding noises during operation
The drum not turning smoothly or becoming misaligned
Increased friction causing overheating or burning smells
The dryer not tumbling clothes properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Marks left on clothes
Noisy

Do-It-Yourself Stories from Customers like You Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016

The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible. Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem. Next step was to... Read more

$9.95

Compare At:: $11.94
You Save:: $1.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Dryer Gas Valve Coil Kit

4.9 (159)

By: Frigidaire

Part Number: 5303931775

The Dryer Gas Valve Coil Kit is an OEM part for Frigidaire dryers. This kit includes solenoid coils necessary for the opening and closing of the gas valve during the drying cycle. These coils are vital for controlling the flow of gas into the burner, enabling the ignition and maintaining the flame required to dry clothes effectively.

Symptoms of a bad Dryer Gas Valve Coil Kit include:

No heat or insufficient heat in the dryer.
The dryer stops heating partway through the cycle.
A "clicking" noise when the dryer attempts to ignite the gas flame but fails.
Gas smell from the dryer, indicating incomplete combustion.

Causes of a bad coil kit can include electrical failure within the coils, mechanical wear from repeated use, or overheating that damages the coil's integrity.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

No heat or not enough heat
Takes too long to dry

Do-It-Yourself Stories from Customers like You Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014

Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits. I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have. I looked up my dryer, decided what was probably the problem,... Read more

$23.95

Compare At:: $34.51
You Save:: $10.56

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Door Catch

4.9 (71)

By: Frigidaire

Part Number: 131658800

The Door Catch is an OEM part for Frigidaire dryers. It secures the door closed during cycles. This allows the machine to safely run without the risk of the door opening, which could pause the drying process or pose a safety hazard. Constructed from durable materials, this door catch is designed to endure the frequent opening and closing of the dryer door, offering reliability and longevity.

Causes of a bad door catch include mechanical wear from regular use, accidental damage, or misalignment of the door.

Symptoms of a bad Door Catch include:

The dryer door won't stay shut during cycles
Difficulty closing the dryer door securely
The need to apply extra force to close the door
The dryer stops running due to the door opening mid-cycle

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This part fixes the following symptoms

Door won't close
Won't start

Do-It-Yourself Stories from Customers like You Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018

The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts. Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum... Read more

$50.78

Compare At:: $59.92
You Save:: $9.14

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Idler Arm Pulley

4.9 (63)

By: Frigidaire

Part Number: 131863007

The Idler Arm Pulley is an OEM part for Frigidaire dryers. This part keeps the belt aligned and tight, preventing slippage and contributing to consistent drum rotation.

Causes of a bad Idler Arm Pulley can range from normal wear and tear, which can degrade the pulley's material or bearings, to improper alignment that puts undue stress on the pulley, leading to premature failure.

Symptoms of a malfunctioning Idler Arm Pulley include:

Unusual noises, such as squeaking or rumbling, indicating the pulley may be worn or loose
The dryer drum failing to rotate, even though the motor is running
Excessive wear or damage to the dryer belt

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018

$53.42

Compare At:: $63.57
You Save:: $10.15

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Heat Sensor

4.8 (34)

By: Frigidaire

Part Number: 5303281135

The Dryer Heat Sensor is an OEM part for Frigidaire dryers. This sensor monitors the temperature inside the dryer drum to ensure clothes are dried effectively and safely by regulating the heat levels during the drying cycle.

Causes of a bad heat sensor can include wear and tear from frequent use, buildup of lint or debris, or electrical issues. A malfunctioning sensor can result in incorrect temperature readings, leading to under-drying or overheating of clothes.

Symptoms of a bad Dryer Heat Sensor include:

Clothes not drying properly or taking too long to dry
Dryer overheating or shutting off unexpectedly
Inconsistent drying cycles
Error codes related to temperature control

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

No heat or not enough heat

Do-It-Yourself Stories from Customers like You Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014

$38.95

Compare At:: $55.90
You Save:: $16.95

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Rear Drum Support Shaft

4.9 (23)

By: Frigidaire

Part Number: 131777700

The Rear Drum Support Shaft is an OEM part for Frigidaire dryers, specifically designed to ensure the stability and smooth rotation of the dryer drum. This component plays a pivotal role in the dryer's operation by supporting the rear of the drum, allowing it to turn evenly and quietly during cycles. Note: The rear drum bearing kit is 5303281153.

The causes behind these issues often stem from normal wear and tear, excessive loads that strain the dryer's components, or lack of regular maintenance. Over time, the support shaft can wear down, become loose, or even corrode, leading to operational inefficiencies and potential damage to the dryer.

Symptoms of a failing Rear Drum Support Shaft include:

Unusual noises, such as thumping or squeaking, during operation
The dryer drum struggling to rotate or not rotating at all
Increased wear on other components, such as the belt or motor, due to improper drum alignment

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016

$113.73

Compare At:: $136.48
You Save:: $22.75

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Seal

4.8 (49)

By: Frigidaire

Part Number: 134417000

The Dryer Seal is an OEM replacment part for Frigidaire dryers. It is located at the doorway opening where the drum rotates and helps prevent lint, moisture, and heat from escaping. The seal is a crucial component that ensures efficient drying and heat retention within the dryer drum.

Causes of a bad seal can include wear and tear over time from continuous use or damage due to mishandling. The nylon seal experiences a lot of friction and heat stress with each drying cycle.

Symptoms of a bad seal include:

Increased drying time as heat escapes
Excess lint and moisture accumulation inside dryer components
Visibly worn or cracked seal edges
Cool air leakage noticed around the door when the dryer is running

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Takes too long to dry

Do-It-Yourself Stories from Customers like You Felt/nylon "bearing" felt glide assembly for dryer drum front end support had worn nearly completely away Harlan D. • Warrenville , IL • November 19, 2014

Get some acetone at a Hardware Store before you start. A pint will do. Unplug the dryer from 110 VAC. Pull the top off of the dryer, by lifting it from the front first. It is attached with snap metal fittings. Do not completely remove the top, just tip upright to gain access to the front interior of the dryer. Before you pull any wires from the door switch, record which color wires go to which terminals on the door switch. If you reassemble the connections incorrectly, the gas value will... Read more

$15.95

Compare At:: $39.50
You Save:: $23.55

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Door Strike

4.8 (20)

By: Frigidaire

Part Number: 5303207102

The Door Strike is an OEM part for Frigidaire dryers. It is a small, essential component that ensures the dryer door remains securely closed during operation. The door strike engages with the door catch to keep the door latched, allowing the dryer to operate efficiently and safely. Without a functioning door strike, the dryer may not start, or it could stop mid-cycle.

You should replace this door strike if it becomes damaged or worn out. Over time, the door strike can suffer from wear due to regular use, misalignment, or accidental impact, leading to issues with the dryer door latching properly.

Symptoms of a bad door strike include:

The dryer door not staying closed
The dryer not starting or stopping unexpectedly
Difficulty in latching the dryer door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Frigidaire dryer door would not stay closed Carolina L. • Miami , FL • September 08, 2015

My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch. I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to... Read more

$28.95

Compare At:: $34.45
You Save:: $5.50

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Bracket

4.9 (9)

By: Frigidaire

Part Number: 131724301

The Drum Bearing Bracket is an OEM replacement part for Frigidaire dryers. It holds and supports the drum bearing, which allows the dryer drum to spin smoothly during the tumbling and drying cycle.

Causes of failure can be cracking or breaking of the bracket over time due to constant use and stress. Improper installation that puts strain on the bracket may also lead to issues.

Symptoms of a bad drum bearing bracket include:

Excessive vibration or shaking during operation
Loud grinding or scraping noises
The dryer drum not spinning properly or at all
Premature wear of the drum bearing

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019

I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more

$10.30

Compare At:: $11.36
You Save:: $1.06

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Ball

5.0 (5)

By: Frigidaire

Part Number: 5303281019

The Ball is an OEM part for Frigidaire dryers. This part helps the drum to rotate smoothly and evenly. It provides a stable and low-friction contact point, allowing the drum to turn efficiently during drying cycles. This is a drum-bearing ball only. For a complete drum bearing and shaft kit order 5303281153.

Causes of a bad ball can include regular wear and tear, friction from continuous drum rotation, or physical damage.

Symptoms of a bad dryer ball include:

Squeaking or grinding noises during operation
The drum not rotating smoothly or becoming unbalanced
Increased friction leading to higher energy consumption
Visible wear or damage to the ball

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019

$12.95

Compare At:: $15.28
You Save:: $2.33

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Ignitor Assy

4.9 (22)

By: Frigidaire

Part Number: 5303937186

The Ignitor Assembly is an OEM replacement part for Frigidaire dryers. It serves as the ignition source safely firing up burners to initiate drying cycles.

Causes usually relate to the continual thermal shock experienced from heating and then rapidly cooling over extended use. As a foundational safeguard, ignitors require OEM replacement when arcing declines.

Symptoms of a faulty ignitor can include:

The dryer fails to start or stop heating intermittently
Cycles taking overly long to complete or feel uneven
Excessive service calls relating to "no heat" troubles
Risk of uncombusted gas pooling in dryer if ignition falters

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This part fixes the following symptoms

No heat or not enough heat

Do-It-Yourself Stories from Customers like You Gas smell in the dryer after a cycle completed no smell outside the dryer (until i opened the door!) Matthew M. • Mcfarland , WI • April 25, 2016

Frigidaire Gallery gas dryer from maybe 15 years ago. Based on the fact the the smell was only in the dryer, I concluded it must be the gas valve failing to completely seal when closed. After looking at the insides again, I suppose it is possible that it was a connection near the burner, but that stuff had remained untouched for 10 years so I still think I made a good assumption. I got a new ignitor as well since I was in there, and compared to the valve, it was cheap! I thought I could get in... Read more

$62.95

Compare At:: $74.91
You Save:: $11.96

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Screw (8-18 Thread)

5.0 (5)

By: Frigidaire

Part Number: 131168200

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

Fastens components to frames, brackets, and covers
Replaces missing, damaged, or rusted screws
Helps reduce looseness, vibration, and rattling noises
Restores proper alignment of panels and assemblies

What's included: One screw

Disconnect power before servicing; shut off gas/water if applicable
Start the screw by hand to avoid cross-threading; use the proper driver
Tighten snugly—do not overtighten to prevent stripping metal or plastic

Do-It-Yourself Stories from Customers like You Grill on air duct had an item melt on to it and partially block air flow Charles C. • Orchard Park , NY • November 25, 2017

It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube. I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to... Read more

$19.95

Compare At:: $23.94
You Save:: $3.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Frigidaire part

Clip - Ball

5.0 (1)

By: Frigidaire

Part Number: 5303281020

For a complete drum bearing and shaft kit order 5303281153.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019

$12.95

Compare At:: $15.54
You Save:: $2.59

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Frigidaire part

Screw (10-16 X 0.75 In), Single

4.8 (4)

By: Frigidaire

Part Number: 131205300

This replacement screw secures appliance panels and components. With a #10-16 thread and 0.75-inch length, it replaces stripped, rusted, or missing hardware to restore a tight, rattle-free fit and reduce vibration and noise.

Fastens cabinet panels, brackets, or internal parts in washers and dryers
Direct replacement for worn or lost screws to keep assemblies aligned and secure
Helps address loose/vibrating panels, rattling noises, or visible gaps/misalignment
Spec: #10-16 thread; 0.75-inch length

What's included: 1 screw (10-16 x 0.75 in) Install notes:

Disconnect power; for washers, also shut off water supply
Match the original screw location; start threads by hand to prevent cross-threading
Use a driver that fits the screw head properly; tighten snugly without overtightening

Do-It-Yourself Stories from Customers like You Machine was full of water and wouldn't pump it out Michael Q. • Richmond , IN • November 11, 2017

Googled the problem, watched videos on Youtube. Took apart machine and tried cleaning filter most people said was the problem. Wasn't anything but a penny in it so that wasn't the problem. I decided the pump must be bad ,the spring for the bellows and the console were broken so I bought those as well. Got the parts put them on and machine filled up with water turned over a few times and then stopped. The only thing else it could be is the fill level sensor or the main circuit board. Ordered... Read more

$9.58

Compare At:: $10.74
You Save:: $1.16

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Wdg4850bwd Parts

Dryer Drum Belt

Rear Drum Bearing Kit

Drum Bearing

Dryer Gas Valve Coil Kit

Door Catch

Idler Arm Pulley

Heat Sensor

Rear Drum Support Shaft

Seal

Door Strike

Bracket

Ball

Ignitor Assy

Screw (8-18 Thread)

Clip - Ball

Screw (10-16 X 0.75 In), Single