Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replace your washer door seal to stop leaks and prevent mold buildup. Essential when you notice water escaping or damage to the rubber. Verify fit by model.
Removed top of washer and lower front trim to access inner boot clamp, replaced boot and reassembled machine. Of coarse I cleaned every thing as I went. Read more
Secures the door boot seal to the washer front panel, preventing leaks. Replace if broken or when installing a new door seal for proper fit.
Fixing was easy and took approximately 1 hour. I have a Bosch Axxis washing machine and all parts came exactly as ordered and within 2 days of order. I had to take off front and top panel and the door switch. The new wire and spring was part of the order and I had to pay for it. The old parts looked fine to me and I could have reused them but since I had the new ones, I replaced them anyhow. I wish I would have the option to buy the rubber gasket only. Read more
Fix a washer that won't spin or spins slowly with new motor carbon brushes. Easy DIY repair—replace worn brushes to restore drum rotation. Set of 2.
This is the second time this issue has come about. Bosch would tell you that you have a brushless motor. This is not true. If you get on youtube.com you can see how you can replace the brushes in your motor. Brush replacement. $50. New motor using a appliance repair man $500. Read more
Wire clamp spring that secures the door boot to the washer's front panel opening. Replace if broken, stretched, or missing to keep the seal properly seated.
Fix a washer that won't drain or hums during drain cycle. This drain pump removes water during wash cycles. DIY repair takes 20-90 minutes.
Replaced the drain pump assembly. Took about 90 minutes. Most difficult part was getting to the hoses and clamps in inside the machine at the bottom front. Just had to open the back panel and work inside. About the same difficulty as changing the radiator hoses on an automobile engine. Read more
Outer door panel that frames the washer door glass and interfaces with handle/latch components. Replace if cracked, broken, or damaged to restore appearance.
Replaced front panel of door. The equipment was at my doorstep within 3 days. It matched perfectly and the repair was a breeze. Read more
Fix a washer that won't spin or tumble clothes with a new drum drive motor. Solves drum rotation failure from worn motor windings and bearings.
By replacing the motor Read more
Replacement door hinge for front-load washers. Supports door weight and enables smooth opening/closing. Replace if cracked, broken, or causing door sag.
After years of replacing the female electric latch switch that controlled the operation of the machine, I discovered that the window/door's handle's connection to its male latching hook had failed. The two were no longer interconnected. Also, the window/door's frame and hinge were materially "fatigued" meaning the hinge/body assembly was allowing the window/door to sag - causing the misaligned door/window to machine body electric latch switch to break when the window/door was closed. Gaining... Read more
Replaces worn or broken washer drive belt that connects motor to drum. If drum won't spin during wash or spin cycles, this belt restores operation.
Followed this video: https://www.youtube.com/watch?v=hQ18AD0zDpM - really, really simple job. ...also replaced the rubber door seal (video also on youtube) as the old one was a bit moldy. Read more
Door won't stay closed or washer won't start? A faulty door latch prevents secure closure and cycle operation. Simple DIY fix restores reliable function.
I entered my Bosch Washer's model number on AppliancePartsPros.com. The schematics on the web site were clear and very informative. From the schematics I found the exact parts I needed. From the schematics I figured out that the repair should be easy and that I can do the job by myself. Thank you AppliancePartsPros for building a website for people like me. Read more
Fix a dishwasher that won't fill or overfills with this water inlet valve solenoid. Restores proper water flow control. Easy 10-minute repair.
The repair is easy. Two screws in the back hold the top cover - once they are off you need to slide the cover back and it comes off. The valve is right there where the cold water hose is connected. Disconnect the control wires / clamp and slide back the wire clamps / remove the two rubber hosed / remove the old valve (it is snapped in place - look at the new one to understand the snap mechanism) / install the new valve. The repair takes less than 10 min. I tested and sure enough... now it... Read more
Replacement leveling foot supports and levels your washer for steady operation. Install this foot if yours is worn, cracked, or missing to restore balance.
Was the door latch, easy to replace. I really recommend the appliancepartspro.com,the delivery was so fast 1 day. Read more
Fix a washer that won't stop filling or overflows during cycles. This water valve magnet controls water flow during wash and rinse. Common DIY repair.
Replaced the hot water intake valve. Read more
Plastic bushing that sits between the washer door hinge and pivot point. Replace when worn, cracked, or causing loose door alignment and noisy operation.
Secures and frames the door glass on your washer. Replace if trim is cracked, loose, or missing to restore appearance and maintain proper seal. Verify fit with your model number.
Easy to find part on website, easy ordering and received part in a day. Needed a T20 Torx driver, which fortunately I had. 10 screws on the frame and 2 on the hinge and simple to do. Read more
Replacement washer door handle that restores access to your appliance. Installs on the door exterior. Replace if cracked, broken, or loose for easier use.