Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Pan cover wheel for refrigerator fresh food drawers. Replace this roller if worn, cracked, or broken to restore smooth drawer sliding and support.
Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more
Replacement humidity control slide for refrigerator crisper drawers. Installs in produce compartment to adjust moisture levels. Needed when original is broken, cracked, or missing.
Replaced Read more
Fix uneven cooling or warm spots in your fridge with this evaporator fan motor. Restores airflow across coils when the fan runs weak, noisy, or stops.
Lack of water was due to frozen water reservoir on refrigerator side. Frozen water was due to temperature issues - cold on bottom of both freeder and refrigerator side, warmer at top. This was caused by evaporator fan failure. The fan had come loose from its housing and eventually vibrated itself to death - wire leads had vibrated open. Since the fan/wire harness are integrated, I needed to replace the unit. Evaporator fan blade took a beating too, so I replaced that as well. Online repair... Read more
Ice dispenser not working or just humming? The auger motor drives ice delivery. Easy DIY fix in under 15 minutes with our video guide. Restore ice flow.
Replaced auger motor Read more
Directs defrost water from the evaporator to the drain pan below your refrigerator. Replace if cracked, damaged, or clogged to prevent water pooling.
Pulled down the existing drain tube and installed new one. Tight area so it requires two hands to push up and attach the new tube. The short rubber tubing attached to the new drain tube has to fit snug onto the plastic tube connection that hangs down. Replacing the water dispenser tray is simple and no explanation needed, Read more
Fix inconsistent temps or ice buildup on evaporator coils? This sensor seal protects accuracy. DIY-friendly with wire splicing. Video guide available.
This fridge has had a problem of ice building up around evaporator coil in fresh food side. Wife (she HATES this thing) says it's done this from day one; 10 years. GE guy says all these models do this and there's no fix for it, so we have clean out the ice periodically... Like the 1940s pre auto defrost. Now with the issue of FF side temp too highi assumed the ice had built up around FF evaporator coil preventing proper cooling, but AppliancePartsPros.com suggested the FF temp thermistor may... Read more
The Grill Recess is an OEM replacement part for GE refrigerators. It is located in the dispenser area, acting as a catch tray to collect drips and spills from the water or ice dispenser. This component helps keep the dispenser area clean and prevents water from dripping onto the floor or refrigerator surfaces.
Over time, the grill recess can become cracked, discolored, or damaged due to regular use and exposure to moisture. Replacing it ensures a clean appearance and continued functionality of the dispenser area.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Followed the instructions in your video. The demonstration is well done and easy to follow. Read more
Seals your refrigerator's fresh food door to prevent air leaks and maintain proper temperature. Replace if torn, cracked, or door won't stay closed. Verify fit.
Ordered replacement seals for both freezer and refrigerator sides. Followed directions that I had found on YouTube. The installation in a nut shell is warm the seals in a bathtub with very hot water for at least 2-3hrs then place the seals. Then warm the seals with a hair dryer as needed. After getting the seals out of the hot bath the installation took all of 20-25 minutes for both seals. Read more
Replacement spring for refrigerator ice dispenser systems. Wraps around shifter lever to control crushed vs. whole ice selection. Replace if broken or stretched.
When I took it apart I found that the drive cup was cracked, the helix lock plate hole was reamed out and the ice deflector spring was broken. The biggest problem was the helix had slipped down the shaft and allowed the end of the shaft to bore a hole in the housing which made it a bear to get out. Others have had the same problem. Once I got past that obstacle, it was simple to replace all the parts and it's working like normal again. Very helpful video explaining the repair. Read more
Black plastic lever assembly that installs on the freezer door hinge mechanism. Replace when cracked, broken, or missing to restore proper door closure.
I replaced the lever asm. and spring Read more
Replacement paddle for refrigerator ice dispenser. Press to activate ice release. Replace if cracked, broken, or won't spring back after pressing.
I order both the paddle and spring and watched a video on how to remove the operating panel to replace them Read more
Left-side glide rail that supports and guides your refrigerator's ice bucket or drawer. Replace when cracked, broken, or worn to restore smooth sliding.
It was very simple, took longer to unload freezer than to install glides Read more
Secures drawer rollers in your refrigerator's slide assembly. Replace if lost during maintenance, stripped, or missing to properly mount drawer wheels.
Protective cap that covers the evaporator fan motor bearing and housing in freezers and refrigerators. Replace if cracked, broken, or missing to prevent debris.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Ice dispenser not working or jamming? The ice bucket helix moves ice cubes to the crusher. Moderately difficult repair requiring full disassembly.
Ice was not being dispensed when lever was pushed in either crushed or cubed mode I removed the ice bin. After searching the web for reasons for this I pulled the bin out and started looking at auger assembly. I noticed that the sections of the Helix blades were missing. Ordered the Helix here at AAP and received the part the next day. The whole process took about an hour and as others have noted, you have to disassemble the bin assembly to get the auger assembly out. I watched the video... Read more
Plastic shelf stop locks refrigerator shelves into liner slots. Replace if cracked, broken, missing, or lost during cleaning to secure shelves properly.
Watched short You Tube repair video. I saved at least on a $100 GE service call. The electronic ID assembly was priced much less than quote on GE.com! Read more