Kenmore Elec Dryer 11063942101 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: D7824706Q
The Replacement Icemaker is an OEM replacement part for Whirlpool made refrigerators including Whirlpool, Amana, Maytag, and many others. It is a component responsible for producing ice cubes or crushed ice, ensuring a constant supply of fresh ice for your convenience. Measuring approximately 11 inches long and 5 inches wide, this ice maker assembly is made of durable plastic and metal
Symptoms of needing a replacement icemaker include:
- No ice production or significantly reduced ice output
- Ice cubes appearing misshapen or clumped together
- Leaks or water buildup in the icemaker area
- Strange noises or grinding sounds coming from the icemaker
Causes of a faulty icemaker can include normal wear and tear over time, water supply issues, clogging or blockages, or electrical malfunctions.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
Please note: that this ice maker is a replacement only and not suitable for add-ons or brand-new installations. It does not include the harness or hardware. For wire harness(Plug)order WPD7813010. For cover order WPW10289690. For shut off bail arm order WP67004028.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker not making ice
-
Ice maker won't dispense ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker stopped producing ice William W. • Southampton , NJ • July 31, 2015
My first hour: I investigated first by pulling out refridgerator to see if the water line hose was kinked. I started under the kitchen sink where it begins, coming from faucet water supply. Then I followed it to the back of the fridge to see if anything looked odd. Next I went to the ice maker itself. I investigated the ice maker by removing the freezer food sliding tray and hanging tray, and then unscrewing the door off the slides. When I looked inside at the ice maker, I saw the tube where...
Read more
More
$95.95
- Compare At:
-
$119.43
- You Save:
-
$23.48
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10662129
The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.
Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.
Symptoms of a bad Run Capacitor include:
- The appliance does not start.
- The motor shuts off shortly after starting.
- The appliance is humming but not running.
- Increased energy consumption.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Clicking sound
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Both the freezer and refrigerator stopped cooling Raymond O. • Kerrville , TX • April 11, 2015
I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how...
Read more
More
$42.95
- Compare At:
-
$50.68
- You Save:
-
$7.73
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469
The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly.
Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.
Symptoms of a bad door switch include:
- The refrigerator fails to resume cooling after closing the door
- The inside light fails to turn on when the door is opened
- Abnormal energy usage due to improper door monitoring
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Fridge interior light kept going out Phil D. • Phoenix , AZ • June 16, 2014
Replaced door switch - it took less than 5 minutes - works perfectly
Read more
More
$29.30
- Compare At:
-
$35.16
- You Save:
-
$5.86
Genuine Whirlpool part
By: Whirlpool
Part Number: 833697
This OEM Replacement Part is a high-quality, 2-watt condenser fan motor for Whirlpool refrigerators.The motor is designed to optimize your refrigerator's cooling performance. This 115-volt motor operates with a clockwise rotation.
Symptoms of a bad condenser fan motor kit include:
- Gradual rise in interior freezer temperatures
- Inability to maintain consistent cooling performance
- Loud buzzing or grinding noises coming from inside
- Tripped breakers or failure to restart after service
Causes stem from normal wear of ball bearings as the high-efficiency motor operates continuously. Exposure to dust or debris introduced through openings accelerates wear over many years of use.
This OEM part is also compatible with brands including Kenmore, KitchenAid, and Danby.
This part fixes the following symptoms
-
Fridge runs too long
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Conderser motor went out David W. • Durand , MI • April 03, 2014
After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been...
Read more
More
$61.95
- Compare At:
-
$73.72
- You Save:
-
$11.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627985
The Icemaker Cycling Thermostat is an OEM part for Whirlpool refrigerators. This thermostat plays a crucial role in the icemaker's operation by monitoring the temperature in the icemaker and ensuring it is at the appropriate level for proper ice production. It reads the temperature to determine when the icemaker should cycle on and off.
Causes of a bad icemaker cycling thermostat can include electrical malfunctions, temperature sensor issues, or wear and tear.
Symptoms of a bad icemaker cycling thermostat may include:
- Inconsistent ice production.
- The icemaker not cycling properly.
- The icemaker not dumping the ice into the ice bin.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!!
The do it yourself video was extremely helpful and made the repair very easy.
Thanks so much for the great service and quick delivery !!!
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPA3073101
The Whirlpool light bulb is an OEM replacement part responsible for providing illumination within the appliance, typically found in the interior of a refrigerator or oven. This incandescent bulb features a small screw-in base and clear glass. It operates at 120 volts and has a power rating of 25 watts. Its primary function is to emit light when the appliance's door or lid is opened, allowing users to see and access the contents inside.
Causes of a bad light bulb can include regular wear and tear from frequent use, electrical surges, or damage from handling. Over time, light bulbs naturally burn out and require replacement to maintain adequate lighting inside the refrigerator.
Symptoms of a bad light bulb include:
- The refrigerator or freezer compartment being dark when the door is opened
- Flickering or dim lighting
- A completely non-functional light bulb
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad refrigerator light socket Russell R. • Tulsa , OK • December 14, 2014
Dropped light panel by removing two screws with socket set. Unplugged two terminals and unclipped the light socket from the base. Then just clipped the new socket onto the base, plugged the connectors onto the terminals and remounted the base. Total job was less than 15 minutes.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Whirlpool part
By: Whirlpool
Part Number: R0181181
The Door Closure Kit is an OEM replacement part for Whirlpool refrigerators. The kit includes all the necessary parts to ensure your refrigerator door closes and seals properly - including two black and two white cams used for both the door and the hinge.
Over time, door closure mechanisms can wear down from continual opening and closing motions. The cushions compress and arms lose tension. Without a tight seal, cold air can escape raising energy costs.
Symptoms of a bad door closure kit include:
- Doors not closing or sealing fully
- Difficulty closing doors that don't latch securely
- Noticeable cool air loss around door edges
- Frost buildup indicating air leakage
It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Door won't open or close
-
Door sweating
-
Fridge too warm
-
Clicking sound
See more...
Do-It-Yourself Stories from Customers like You
Door didn't close the bottom cam was worn out Miguel G. • Ridgecrest , CA • October 17, 2015
Used floor jack to lift and secure door, left upper hinge point in place, removed lower hinge support, removed old cams and installed new ones and lubricated, secured and adjusted hinge .
Read more
More
$10.43
- Compare At:
-
$12.41
- You Save:
-
$1.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP628356
This icemaker fill cup and bearing assembly directs water from the inlet tube into the ice mold and provides the pivot point for the shutoff arm. Replacing a cracked or missing cup helps stop leaks, misdirected fills, and inconsistent ice production.
- Channels incoming water into the ice mold to prevent splashing and overfilling
- Provides the pivot/bearing for the ice level (shutoff) arm
- Helps maintain consistent cube size and reliable icemaker shutoff
- Typical symptoms: water or ice buildup under the icemaker, overfilling or hollow/irregular cubes, or a loose/binding shutoff arm
What's included: 1 fill cup and bearing assembly Install notes:
- Unplug the refrigerator and shut off the water supply before servicing
- Remove the ice bin and detach the icemaker to access the side-mounted cup
- Position the new cup directly under the fill tube; secure with existing hardware and verify the shutoff arm pivots freely in the bearing
- Restore power and water; run a test fill and check for leaks
This part fixes the following symptoms
-
Ice maker dispenses too much ice
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken part Eva H. • Walnut Creek , CA • March 23, 2014
Watched online video and worked along - it was easy and quick - I was amazed!
Read more
More
$32.42
- Compare At:
-
$38.58
- You Save:
-
$6.16
Genuine Whirlpool part
By: Whirlpool
Part Number: 4318047
The Single Water Valve is an OEM part for Whirlpool refrigerators. This valve controls the flow of water to the refrigerator’s ice maker and water dispenser, ensuring a consistent and reliable supply of water for ice production and dispensing.
Causes of a bad single water valve can include wear and tear over time, mineral buildup from hard water, or electrical malfunctions.
Symptoms of a bad single water valve include:
- No water dispensing from the refrigerator
- The ice maker not producing ice
- Leaks around the valve area
- Unusual noises when the water dispenser is activated
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Leaking valve on ice maker Richard D. • Front Royal , VA • March 15, 2014
Order new valve
Read more
More
$44.95
- Compare At:
-
$53.04
- You Save:
-
$8.09
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627018
Size: 1/4 inch. Nut for plastic water line.
Do-It-Yourself Stories from Customers like You
Broken y connector off of water valve on amana refridgerator Greg S. • El Dorado Hills , CA • October 19, 2014
Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks.
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB5705307
Ice maker water line: 1/4x 8ft.
Do-It-Yourself Stories from Customers like You
Water leak and broken parts inside refrigerator Todd B. • Indianapolis , IN • August 28, 2017
Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan
Read more
More
$16.95
- Compare At:
-
$20.00
- You Save:
-
$3.05
Genuine Whirlpool part
By: Whirlpool
Part Number: WPM0114003
This speed clip is a small retainer that slides over a panel edge to provide a captive thread for a screw. Replacing a worn or missing clip restores a tight, rattle-free hold on the attached component. What it does:
- Slides over a panel or bracket to create a captive thread for a mounting screw
- Maintains tension to resist vibration and loosening
- Helps when a screw spins or won't tighten due to a missing retainer
- Addresses loose, rattling, or misaligned panels or trim
What's included:
Install notes:
- Disconnect power and, if applicable, shut off water before servicing
- Note the original clip's location and orientation for correct fit
- Fully seat the clip on the edge; start the screw by hand to avoid cross-threading
- Do not overtighten; ensure the component is secure and noise-free
Do-It-Yourself Stories from Customers like You
Water was leaking & then freezing in the bottom of the freezer compartment Ronald S. • Frankfort , IL • December 30, 2014
Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPA3223101
This small insert slides into the end of plastic water tubing to reinforce it for a compression-style connection. It helps create a secure, leak-resistant seal at valves and couplings on appliance water lines.
- Supports the tubing wall so the ferrule and compression nut can tighten without collapsing the tube
- Helps prevent drips or seepage at the connection point
- Useful when the tubing end is cracked, deformed, or won't hold a tight seal
- Common symptoms include leaks at a fitting, a connection that won't stay tight, or restricted flow from a pinched tube end
What's included: 1 tube insert Install notes:
- Shut off the water supply and disconnect power before servicing
- Cut the tubing square; remove any damaged section and deburr the edge
- Slide the compression nut and ferrule onto the tube, fully seat the insert, then assemble the fitting—do not overtighten
- Restore water and check all connections for leaks
Do-It-Yourself Stories from Customers like You
Water was leaking & then freezing in the bottom of the freezer compartment Ronald S. • Frankfort , IL • December 30, 2014
Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98165
This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.
- Fastens covers, trims, brackets, and internal parts to the cabinet/frame
- Used wherever a #8-18 x 5/8 screw is specified
- Replace if the original is missing, corroded, stripped, or will not tighten
- Symptoms: loose or rattling panels, gaps, or hardware that backs out
What's included: 1 screw (#8-18 x 5/8 in.) Installation notes:
- Disconnect power; shut off gas/water before servicing
- Match thread and length; start by hand to avoid cross-threading
- Use the correct driver bit and tighten snugly—do not overtighten
- Inspect and replace damaged clips or tabs before securing
Do-It-Yourself Stories from Customers like You
Missing parts Barry E. • Long Beach , WA • July 20, 2019
Replace
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51