Krfm706ess001 Parts

Water dispenser came down to a trickle and made a lot of noise, I changed the filter but it didnt help and thus the water tank/head assembly needed to be replaced. Replacing the water Tank/head assembly was an easy task, the hardest part is removing the covers and taking care of not breaking the insulation of the water inlet hose. For the not-so-experts like me it is also good to rememebr to have a bucket to collect all the water that comes out after the connection to the solenoid valves is... Read more

I pulled the old gasket off the door then I used rubbing alcohol to clean the mold along the back of the door and in the insert for the gasket seals . The new gasket fit extremely well and was very easy to put in. I waited 24 hours for the gasket to come back to its normal shape. After putting the gasket in I waited another 24 hours to make sure that I was getting no Icing inside the freezer area. There was no icing so the job is completed. Read more

First, I had to replace a cracked roller so I could roll the frig out. I did this by tilting it slightly and shoving a shim underneath. I had to use two shims to get enough clearance for the wheel. I unscrewed the old wheel, screwed in the new one pretty easy, removed the shims and rolled it out. Then I unplugged the frig from the power socket, removed 6 screws from the back panel, and pulled out the old drain kit, which had become clogged with dirt and dust. I put in the new drain kit,... Read more

The right door on our Jenn Air French Door Refrigerator would pop open & not fully close when the left door was closed first. Called the local distributor/dealer who advised me that the magnetic door gasket probably needed replacement (cost $300.00 + for the repair) What??? Visited you web site where I noted the right door had a "closure & bushing" on the bottom of the door. Could it be this was the problem fix? Took the right door off & examined both pieces. Sure enough the bushing was... Read more

I replaced the seal with the identical replacement part. Read more

Replaced it completely in less than an hour. Part was exact OEM replacement and worked perfectly. Read more

Replaced icemaker and shutoff arm. Easy project. Read more

Ordered new part, very easy to replace only took about 5 minutes to install new part and get everything going again. Part was a perfect fit and was shipped and received in only a few days. Thanks Read more

I watched a YouTube tutorial on "fridge's not cooling". A few troubleshooting ideas were discussed, one of which was to replace the "device start" and "run Capacitor". I probably only needed the device start but decided to purchase both through "AppliancePartsPros.com" for a total of $134. It was east to replace and things are starting to cool to their targeted temperatures. Appliance Parts Pros web site saved me from having to purchase a new fridge for about $800. Read more

A tree had fallen across our power lines and the resulting power surge fried the circuit board. The diagnosis was a bit difficult and involved an educated guess based on how the frig was acting. The display was dark unless a button was pressed and the inside light worked but that was all. I had to rule out the compressor as the root cause so I back fed power to the compressor and heard it and the condenser fan fire up. I ordered the board and found the only way I could get it overnight was to... Read more

Replace Read more

Received exact part and easy to replace, took all of 5 minuets to replace. All you need is a 1/4" nut driver or 1/4" wrench. Super easy ! Read more

Replaced heating element and thawed out ice buildup. Read more

After trying to stop leaks with glue, i figured I should replace the drip pan, It took a little effort to get the fan out of the way but once that was taken care of the rest was simple. Putting the new pan in was very easy five minutes at most. The best part was the great delivery I got from appliance parts, and this is not a paid commercial. THANKS!!! Read more

• Leaking

Thought leak was coming from icemaker but refrigerator was making ice just fine. had puddle on floor just below freezer door. upon closer inspection realized leak was coming from drain line. there were 2 pieces of tubing and the connector. leak was coming from where tubing goes into connector. wanted to replace it. didn't know what it was called. did live chat with someone I think was named James. he sent me diagrams and I could identify the part. once identified I ordered it. boom.... Read more

Using the website was super easy; I entered my KitchenAid model number, located the part on the schematic diagram, used the number to reference the actual parts listed below the diagram and placed an order. The parts arrived in two days. I watched the how-to videos and took notes. The repair itself took the same amount of time as in the video. The time consuming part was taking the food out of the refrigerator, cleaning the interior & original parts before reassembling. The only problem I... Read more