Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice dispenser not working or skipping? This coupling washer connects the auger motor to the ice bin. DIY-friendly repair with video guide included.
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed... Read more
Fix incorrect temperature readings or freezing in your fridge. This temperature sensor helps regulate cooling. Easy 15-minute DIY repair with one screw.
Simple fix, replace thermistor. One screw, plug it in and I saved $120 repair call. Read more
Bottom mounting screw for refrigerator ice maker auger assembly. Secures auger blade components together. Replace if stripped, damaged, or missing.
Replaced the auger, blade and screw (bottom) Read more
Encloses the water filter to ensure proper flow and filtration. Replace if cracked, leaking when filter is removed, or causing water hammer. Confirm fit.
The video was very helpful, but my KitchenAid model required slightly more steps. Only the two screws in front held the filter housing, same as the video shows, but it has to be removed from the rear. My model did not have the wire brace, only the two front screws held the housing. Shut the water off and pull the electrical plug. Remove the two screws holding the filter housing in the front. Remove the lower panel in the rear at the bottom of the refrigerator. Remove the two screws holding the... Read more
Ice dispenser door won't open or ice won't drop? This refrigerator ice dispenser motor powers the chute door mechanism. Moderate DIY repair, 30-45 minutes.
Reviewed the AppliancePartsPros.com site and decided that the most likely suspect was the ice motor. I ordered one and got it FAST! I removed the water ice tray in the bottom of the Ice/water kiosk which exposed two phillips screws which I removed. The front panel came off by lifting upward and unplugging it. The ice door motor was visible near the top of the opening. I removed the hex head screws with a 1/4" nut driver so the ice door assembly was free. The core control board was hidden... Read more
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Replaced icemaker and shutoff arm. Easy project. Read more
Refrigerator light won't turn on? This light socket kit restores interior lighting when bulbs won't work. Simple DIY repair with video guide.
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come. Read more
Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.
Found the parts in the diagram of my fridge and simply installed it very easy Read more
Secures hinge cams to refrigerator door assemblies. Replace if stripped, corroded, or lost during door hinge repair or cam replacement procedures.
Ice maker stopped working or leaking water into freezer? This complete ice maker assembly restores automatic ice production. Moderate DIY install.
Replaced entire ice maker. A couple of important points. (1) The ice maker module does not include all parts. The door flap for example is not included. So save all plastic parts from the old unit including screws. The biggest installation problem was the power cable. There was little room on the side of the ice maker for the cable and connectors to fit. Make sure the connector that mates with the refrigerator cable is seated onto the plastic housing and does not stick out or dangle out.... Read more
Ice sticking in tray or won't release? The stripper arm removes ice from the mold. Common issue: broken teeth or loose tab. 30-minute DIY fix with video.
My fridge was too cold - everything was freezing solid, even in the produce bins. The air from the diffuser vent was constantly running. After unplugging the fridge and plugging it back in, the diagnostic code on the control panel indicated that the air diffuser was not working. I purchased a new air diffuser, watched the very helpful video that showed how to install it, and replaced the part in about 10 minutes. The next day, I can tell that everything in my fridge has finally begun to thaw... Read more
Ice maker cover loose or broken? This bracket secures the front cover to your ice maker assembly. Simple 5-minute DIY repair with basic tools and video guide.
Purchased new ice maker from Appliance Repair and replaced the old ice maker and associated parts that broke during attempted repair on my part. Replaced and is working fine. Read more
Mounting screw for refrigerator door hinge cams and internal brackets. Replace when stripped, missing, or damaged to secure door alignment components.
Ordered the parts, took door off the refrigerator. Removed all parts and replace with new parts. Took me about 15 minutes to complete. Read more
Shoulder bolt screw that secures refrigerator door handles. Replace if missing, stripped, or loose to restore proper handle attachment and alignment.
Simple Repair. Read more
Cantilever shelf assembly with glass and frame for refrigerators. Replace cracked, broken, or missing shelves to restore storage space and organization.
Replaced Shelves. AppliancePartsPros.com shipped the parts fast and I got them the next day. I had it fixed within minutes after opening the boxes. Highly recommend this parts supplier. Read more
Connects water line sections in your refrigerator. Replace if cracked, leaking, or damaged to restore secure connections to ice maker and dispenser.
Thought leak was coming from icemaker but refrigerator was making ice just fine. had puddle on floor just below freezer door. upon closer inspection realized leak was coming from drain line. there were 2 pieces of tubing and the connector. leak was coming from where tubing goes into connector. wanted to replace it. didn't know what it was called. did live chat with someone I think was named James. he sent me diagrams and I could identify the part. once identified I ordered it. boom.... Read more