Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures refrigerator door handle to the door panel. Replace if plate is cracked, stripped threads prevent handle attachment, or handle loosens repeatedly.
Replaced cap handle. Repair took less than 5 minutes. Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Secures the glass panel over your refrigerator's crisper drawers. Replace if cracked, broken, or missing to restore proper shelf support and appearance.
Order a new fixer Read more
Spring component that provides tension for the freezer door handle mechanism. Replace if spring is broken, missing, or no longer holding proper tension.
I looked at the blow up drawing to figure out what parts I might need. I then watched a you tube video to see how to take the handle off. I kind of figured out on my own how to remove the ruined cap handle. It took me a few minutes to figure it out and more time to remove both the handle and the broken part. Turns out I did not need the spring nor the shaft cap handle. Very proud of myself. Saved a huge amount of money. Only problem was that I could only put in one screw as the previous... Read more
Secures panels, handles, and components on your range. Replace this screw if it's stripped, missing, or damaged during door or handle repairs.
Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site. Read more
Mounting screw secures panels, control boards, and burners inside your range. Replace if lost, stripped, or corroded to keep components stable.
Replaced the hinge receiver with a new one. The old one was bent slightly inside where it could not be seen. I think someone pushed the door down to far or fell on it. 2 screws to remove it, take out storage drawer and reach up little ways to remove and replace the receiver. Replace the 2 screws. The receiver comes with 2 screws but I ordered an extra ( never used it ). The sides of the receiver were spread just a tiny bit but were enough to cause a problem. Read more
Replacement screw that secures the handle to the oven door trim. Needed when original screw is stripped, rusted, lost, or damaged during handle replacement.
Overall the fix wasn't too hard. The challenge was putting the oven door back together and holding it together while trying to tighten the screws. Enlisted my wife's help to hold the door and at first the handle screws wouldn't tighten. My cordless screwdriver's battery was under-charged. Once I switched batteries I was able to tighten the screws. Seemed like I needed to push too hard (my wife freaked "not so hard you will strip them!") however pushing hard was what was needed. Both screws... Read more
Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.
Installed it according to video watched. Read more
Replaces cracked or broken French door flapper assembly on bottom-mount refrigerators. Includes mullion heater. Installs between doors with 2 screws.
Unscrewed old flap. Then unplugged it. Plugged in new flap ( make sure it is right side up). Screw both hinges back, and voilà, fridge fixed! Read more
Replacement upper right door hinge assembly for bottom-mount refrigerators. Installs at top of right door. Needed when hinge is broken, cracked, or worn.
Simple snap in piece, ordered and shipped in two days. Saving $200 Read more
Upper left door hinge assembly for refrigerators. Secures and supports the upper door. Replace if broken, cracked, or worn to restore door alignment.
Ordered part from AppliancePartsPros.com Read more
Replaces cracked, broken, or scratched pantry drawer cover on your refrigerator. Includes clear plastic viewing window and white frame. Clips into place.
Replaced original parts- Only skill needed was finding plastic push tabs. No tools required. Most of time was used for removing food from refrigerator before looking for tabs. Read more
Machine screw with 8-32 threading used to secure control panels, brackets, covers, and internal components. Replace missing, stripped, or damaged screws.
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part. Read more
Under-cooktop housing that supports surface heating elements. Replace when original box is rusted through, corroded, bent, or has holes that allow spills to drip.
I first DISCONNECTED POWER FROM THE RANGE using the breaker. I then pulled the range out from the wall to give myself plenty of working room. I lifted the range top up as when you clean under the burners. I then moved the ends of the bottom of the slide rods that lock the range top open back where they came loose from the top of the range. This allows you to fold it higher and have complete access to the top of the range. I then took out all the Phillips head screws that hold down the sheet... Read more
Replacement broiler pan set for ovens. Includes pan and insert to catch drippings during broiling. Order if your original is missing, warped, or damaged.
I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more
Mounts to the range frame to anchor the door hinge arm. Replace if cracked, bent, or worn to restore proper door alignment and smooth operation.
I knew for sure that the hinge with the large spring was damaged, but elected to replace both hinges and receivers. Replacing the parts was fairly easy and would have taken me less then an hour. This model has thin metal covers over the hinge assemblies. I found that squeezing in the sides of the covers help to hold them in place on the hinge while reassembling the door. My only difficulty was putting the door back on the oven. It took a little maneuvering but I managed to get it. Now the door... Read more