Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dryer drum roller axle mounts to the rear panel and supports drum rollers. Replace if bent, worn, or wobbling. Helps eliminate noise from damaged axles.
Replaced the tension pulley assembly, drum rollers, drum roller axles, belt, and drum glides while I had the dryer disassembled. It turned out that the cause of the squeak was the tension pulley assembly, however it was easy and economical enough to replace anything that could have been the cause of the squeaking while I had the dryer apart. The parts were ordered on Thursday afternoon and delivered on Friday. I had the dryer repaired and running like new in no time. For about $100, it was... Read more
Supports the dryer drum and allows smooth rotation. Replace if you hear grinding noises, see excessive wear, or notice drum wobbling. Confirm fit with your model.
Replaced them. Read more
Replacement mounting screw for securing components and housings in place. Order a new screw if yours is stripped, missing, or damaged during repairs.
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more
Illuminates your dryer drum interior for visibility. Replace when burned out or flickering. Confirm fit with your model number before ordering.
I went on line and purchased all of the possible parts that could be worn out. I spent less than the service guy wanted to show up...The online videos were spot on. Two hours and it works like new! One of the best values on the Internet! Read more
Timer won't advance or dryer loses heat? This cycling thermostat regulates exhaust temperature. 15-30 minute DIY fix restores consistent drying heat.
I went ahead and ordered the element, and the 2 different thermostats not knowing exactly which one might be the problem. My My Maytag opens from the front and it was actually pretty easy to get into. Also gave me the opportunity to vacuum out the inside of the dryer. Pop the top off, remove the wires that connect the door switch (noting the colors and placement), take off the 2 inside nuts that hols the fron on, pull it forward and lift it off, 3 inside screws to take out to inside lint part... Read more
Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.
First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more
Mounts the washer top panel to the cabinet frame. Replace if screw is stripped, rusted, missing, or damaged during cabinet disassembly and repair work.
I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more
Fix a dryer that overheats, won't dry completely, or stops mid-cycle. This cycling thermostat regulates heat to prevent damage. DIY-friendly repair.
I replaced the main parts for the dryer cycle system Read more
Secures components with constant tension to prevent looseness and vibration. Replace if broken, fatigued, or missing. Verify fit with your model number.
If your dryer motor has come loose or makes grinding noises, this motor clamp secures the drive motor. Simple DIY repair with basic tools in under an hour.
Replaced the motor, blower, rear drum felt seal, and drive belt. Vacuumed up the lint everywhere, cleaned extra lint out of the chute, around the blower, and rear vents. Read more
This dryer idler arm pivots from the motor mount bracket to maintain belt tension. Replace if cracked, worn, or binding to restore smooth operation.
I took the tumbler drum out and looked at the pulley and it was not rotating freely. The idler arm had some wear on the attached post so I replaced bothe parts. Since I was in there already I replaced the drum rollers and dryer belt for good measure. I reassembled the dryer and it works great. The best part of the experience was the parts order. I ordered the parts around 3:00 pm one day, standard shipping, and they were on my doorstep around 1:00 pm the next day. I'm still wondering... Read more
Dryer not heating or taking too long to dry? This heating element converts electrical energy into heat for proper drying. DIY-friendly repair part.
Replaced the heating element following a video online, went great and fixed the problem. Read more
Fix a dryer not heating or taking multiple cycles to dry clothes. This heating element repair kit restores heat output. Moderate DIY repair for most models.
PLEASE UNPLUG DRYER FIRST. This was my first attempt at trying to fix my dryer (Maytag SDE515DAYW). Order the element kit Part Number AP4046564. The installation was easier than I thought. Just removed the two front panels and I was able to reach the back of the dryer, under the drum (this is where the heat element was located), disconnected the wires (took pictures first) and removed the two screws that held the heat element. Pulled the part down and it just slid off. Connected all the wires... Read more
Replace your broken or cracked washer cycle selector knob. This stainless steel control knob installs on the control panel to select wash cycles.
Researched about pRt no. And ordered at appliancepartspros.com....Parts arrive after several days and my problem was solved. Read more
8-16 x 3/8 inch screw fastener for dryers. Secures baffles to drum and various internal components. Replace if missing, stripped, or damaged.
Factory fastener screw secures dryer panels, brackets, and internal components. Replace missing, stripped, or damaged screws to restore tight fit and alignment.
This was a very easy fix. Two screws to get the front off of the washer. Removed one side of the tensioner spring. Loosened two screws for the motor and two screws for the pump. I decided to replace the agitate belt even though it wasn't broken.. So, I removed that belt from the pulleys and the removed the broken belt. then just reversed the process to install the belts. it toke me less than 30 minutes and my washer was back in service. Read more