Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fixes oven or broiler that won't ignite or start. This spark module generates the electrical spark needed to light gas burners when igniters fail to work.
I purchased a new igniter for the bake assembly and found that it, unfortunately, did not resolve my problem. I measured the resistance of the different points on the gas valve and it was reading within spec so I then purchased this spark module and it did the trick. My gas range is a Kitchenaid kgsk901sss02. I had a LOT of trouble finding where the spark module is located, and eventually found a schematic that shows it's location behind the front control panel of the oven. Upon taking the... Read more
Burner grate sits on top of your range cooktop to support pots and pans. Replace if cracked, chipped, discolored, or coating is flaking off.
I ordered four replacement grates at a savings of $100 off the price quoted to me by a local appliance repair company. Read more
Venturi tube for gas ranges and cooktops. Mixes gas and air for proper burner combustion. Replace if cracked, corroded, or threads are damaged.
My 18+ year old Jennair cooktop, PN CCG2520W was in need of a rebuild b/c of a welded venturi tube on the right front [RF] burner. In order to remove the glass top cover, you MUST remove the venturi tube. To do this you have to DRILL-OUT the venturi tube which requires a new venturi and orifice holder. The repair was difficult b/c most of the parts are no longer available. But then I found a ray-of-hope. I was able to find some Jennair (Maytag) parts but they are scarce. Later I found... Read more
Fixes burners that won't ignite or spark continuously. This spark module generates the high-voltage needed for gas ignition. DIY repair, 1-2 hours.
Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were... Read more
Secures panels, handles, and components on your range. Replace this screw if it's stripped, missing, or damaged during door or handle repairs.
Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site. Read more
Brass nut secures the jet holder assembly on gas ranges and cooktops. Replace if stripped, corroded, or damaged during burner maintenance or repair.
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you... Read more
Fix a broiler that won't light or clicks but doesn't ignite. This spark igniter initiates combustion for the upper burner. DIY repair in 10 minutes.
Called a repairman and he told us we needed to change a bunch of parts and would cost over $400! Decided to do some research online and found suggestions to replace the spark igniter. Decided to give it a try. Took about 10min to replace and oven is now working perfectly, for a total of $30! Read more
Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.
Installed it according to video watched. Read more
Replacement screw that secures the handle to the oven door trim. Needed when original screw is stripped, rusted, lost, or damaged during handle replacement.
Overall the fix wasn't too hard. The challenge was putting the oven door back together and holding it together while trying to tighten the screws. Enlisted my wife's help to hold the door and at first the handle screws wouldn't tighten. My cordless screwdriver's battery was under-charged. Once I switched batteries I was able to tighten the screws. Seemed like I needed to push too hard (my wife freaked "not so hard you will strip them!") however pushing hard was what was needed. Both screws... Read more
Burner won't light or has no gas flow? This top burner valve controls gas to individual burners. Moderate DIY repair with basic tools needed.
Mounting screw for gas range and cooktop assembly. Secures internal components and burner assemblies. Replace if corroded, stripped, or missing.
I was surprised when the base, igniter and screw arrived completely assembled! Once I replaced it - the replacement parts worked perfectly. Thank you. Read more
Seals between burner and cooktop surface to prevent gas leaks. Replace if cracked, worn, or causing ignition issues. Verify fit with your model number.
I ordered a replacement gas solenoid valve, which arrived the very next day with only standard shipping! The shipped part was exactly what was needed, and I also ordered 4 replacement O-rings to replace the original dried out ring for each burner base. These parts also arrived within a few days and were the exact parts needed. The service and advice received was commendable. Thanks for the great job. Read more
Burner won't spark or ignite? This spark switch signals the ignition module to light gas burners. Common DIY repair with basic tools, 15-30 minutes.
Took out igniter module and porcelain was cracked. Replaced with ordered part and it worker fine! Read more
If your burner won't ignite or sparks constantly, the spark ignition switch likely failed. Controls surface burner ignition. Moderate DIY repair.
Replaced switch that's attached to burner valve. Read more
Oven won't ignite or clicks but doesn't light? This bake burner with spark igniter fixes grounding issues and ignition failures. Easy DIY repair.
Replaced igniter under oven floor panel. Read more
Replaces the oven floor panel that sits above the bake element. Needed when warped, cracked, or damaged from spills or foil contact. Restores smooth surface.
The problem is a finicky ignition system, Direct Spark Ignition. Apparently Whirlpool redesigned the igniter/burner assembly slightly to make it more reliable. The repair is very easy. Turn off power, but you don't need to turn off gas. Remove oven bottom and flame spreader, then remove burner/igniter assembly, one screw at front, one at back. Lift out burner assembly carefully to avoid stretching wire. Pull electric connector from pin on burner/igniter assembly. Vacuum to clean oven. ... Read more