Wfw96heawo Parts

The Water Temperature Sensor is an OEM part for Whirlpool washing machines. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle. Note: The sensor does not include the seal WP8540766. Order separately if needed. 

Causes of a bad temperature sensor can be failures over time due to mechanical wear, thermal stress on electronic components, or damage from leaks/flooding inside the unit.

Symptoms of a bad water temperature sensor include:

• Inability to switch between wash steps or advance through the cycle
• Erratic or inconsistent temperature readings
• Failure alarms or error codes displayed
• Improper or incomplete washing even on high heat settings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Shock Absorber Washer is an OEM replacement part specific to Whirlpool-brand washing machines. It is a hydraulic device that absorbs the vibrations of the outer washer tub. Note: This is only one shock absorber.

Symptoms of worn or cracked shock absorber washers include:

• Noisy operation as the washer shakes or moves during cycles
• Physical signs of deterioration
• Over time, increased stresses can damage connected components

Causes involve many cycles of compression and release and solvents inside the washer degrading natural rubber. Deteriorated washers no longer absorb vibrations properly.  

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Hose is an OEM replacement part for Whirlpool washing machines. Located at the rear base of the unit, this flexible vinyl hose routes wash water out of the tub and to household drainage pipes.

Causes involve regular flexing weakening hose material integrity over many years. Mineral buildups may also restrict water flow within.

Symptoms of a problematic drain hose include:

• Puddles or residual water remaining after cycles
• Slow drainage of water not meeting cycle timers
• Hose material cracks or splits exposing reinforcement

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Internal Drain Hose is an OEM part for Whirlpool washing machines. This part transports wastewater from the washer tub to the drain pump and out of the appliance, ensuring efficient removal of water during the drain cycle.

Causes of a bad internal drain hose can include wear and tear from regular use, blockages from debris or lint, or physical damage such as cracks, holes, or kinks from improper handling or installation.  

Symptoms of a bad internal drain hose include:

• Water not draining properly from the washer
• Leaks or water pooling around the base of the washing machine
• Error codes related to drainage issues
• Visible damage such as cracks, holes, or kinks in the hose

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Water Pump Assembly is an OEM part for Whirlpool washing machines. This part drains water from the washer during the wash and spin cycles. The water pump assembly ensures that water is efficiently removed from the drum, preventing overflows and ensuring proper rinsing and spinning of clothes.

Causes of a bad water pump assembly can include debris or foreign objects clogging the pump, motor failure, or damage to the impeller or seals.  

Symptoms of a bad water pump assembly include:

• Water not draining from the washer
• Unusual noises during the drain cycle
• Leaks from the pump area
• Error codes related to draining issues

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.

Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.

Symptoms of a bad spring tension hose clamp include:

• Water leaks around hose connections
• Loose or disconnected hoses
• Unusual noises or vibrations during operation
• Water pressure issues within the washing machine

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Vent Hose is an OEM part for Whirlpool washers. This flexible hose is used to vent hot, moist air from the washer to the outside of your home, ensuring efficient operation by removing humidity and preventing mold growth inside the washer.

Over time, the vent hose can become clogged with debris, develop kinks, or suffer damage such as tears or holes. 

Causes of a bad vent hose can include the accumulation of lint or debris, physical damage from moving the washer, or general wear and tear over time.

Symptoms of a bad Vent Hose include:

• Longer drying times in washer-dryer combos
• Excessive humidity or mold growth inside the washer
• The washer feeling hotter than usual during operation
• Visible damage or kinks in the hose

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Suspension Springs are an OEM replacement part for Whirlpool washing machines. This set contains two heavy-duty coil springs designed to absorb vibrations caused by unbalanced or off-center loads inside the washer tub.

Causes of bad springs can include cracks or fractures from extended use, overloading, mineral buildup hampering flexibility, or rust accumulating over many years.

Symptoms of bad or broken suspension springs include:

• Excessive vibration and shaking even with balanced loads
• Loud banging or thumping noises during cycles
• Hissing or squeaking that worsens over time
• Gradual misalignment of the tub on support rails

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Pressure Switch Hose is an OEM part for Whirlpool washing machines. This hose connects the pressure switch to the washer tub, allowing the machine to detect water levels and ensure proper operation of the washing cycle.

Common causes of damage include cracks, holes, or clogs in the hose, which can occur due to wear and tear, exposure to harsh detergents, or foreign objects in the washing machine. 

Symptoms of a bad pressure switch hose include:

• The washing machine not filling properly
• Overfilling or underfilling of water
• Error codes related to water levels
• The washer not advancing through cycles correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This hinge retainer plate secures the appliance door hinge to the cabinet or door, keeping alignment and smooth operation. Replace a bent, stripped, or missing plate to stop hinge wobble and help the door close and seal properly.

• Anchors the door hinge and distributes load to prevent shifting
• Maintains proper door alignment and gap for smooth opening/closing
• Helps prevent door sagging, rubbing, or poor gasket sealing
• Typical symptoms include a loose hinge, wobbly door, or door not closing flush

• Disconnect power and support the door before removing any hinge fasteners
• Mark hinge locations to preserve alignment during reassembly
• Install the plate in the correct orientation; transfer any spacers/shims in original order
• Tighten fasteners evenly, then verify door alignment and gasket seal

This replacement screw secures appliance components such as panels, brackets, and trim. Replacing a missing or damaged fastener restores a tight, rattle-free fit and helps keep your appliance assembled correctly after service or routine maintenance.

• Fastens panels, brackets, or covers to the cabinet/frame for proper alignment and support
• Replaces a stripped, corroded, or missing screw that no longer holds securely
• Helps reduce vibration and rattling caused by loose parts
• Useful when reinstalling components after repairs or part replacements

• Disconnect power; turn off water or gas to the appliance if applicable
• Use the correct driver size; hand-start threads to avoid cross-threading
• Tighten snugly—do not overtighten into plastic or thin sheet metal
• Inspect the mating clip/threads and replace damaged hardware

This washer door bellow seals the opening between the outer tub and the front panel. The drum-light version restores a watertight seal on models equipped with an interior drum light, helping prevent leaks and odor issues from a torn or deteriorated boot.

• Creates a flexible, watertight barrier between the door opening and the outer tub
• Version designed for models with an interior drum light; aligns with the light opening
• Helps the washer contain water properly through fill, wash, and spin cycles
• Common symptoms: water leaking at the door/front, visible tears or cracks, persistent mildew or odor on the boot

• Unplug the washer and turn off water supply before servicing
• Remove necessary front/top access; release inner and outer retaining clamps and remove the old bellow
• Align drain ports and the drum-light opening; seat the bellow fully on the tub and front panel, then reinstall clamps evenly
• Run a quick test and inspect for leaks

This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.

The Shipping Bolt Kit is an OEM part for Whirlpool washing machines, specifically designed to secure the appliance during transport. This kit includes several bolts that are crucial for immobilizing the washing machine's drum, preventing any movement that could lead to internal damage while the unit is being moved. This kit includes two front and two rear shipping bolts

Causes for replacing the Shipping Bolt Kit can stem from misplacing the original bolts after installation or the bolts becoming worn or damaged after multiple uses.

Symptoms of needing a Shipping Bolt Kit include:

• Preparing a washing machine for a move without the original bolts, risking damage to the unit
• Noticing previous shipping bolts are lost or damaged, requiring replacement for future transport

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

STACK KIT FOR LONG VENT DRYER

This drum baffle mounts inside the rotating drum and lifts items so they tumble evenly through the cycle. Replace a cracked, loose, or missing baffle to reduce noise and restore consistent tumbling performance. What it does:

• Lifts and separates laundry as the drum turns for even tumbling
• Helps prevent clumping that can lead to poor results or longer cycles
• Maintains balanced drum movement; damage or looseness can cause rattling or scraping
• May help if items aren't tumbling well, you hear thumping, or garments snag inside the drum

• 1 drum baffle

• Disconnect power before servicing; for gas dryers, also shut off gas. For washers, turn off water supply.
• Open the door and rotate the drum to access the baffle's mounting screw(s).
• Remove the screw(s), disengage the baffle from its slots, and lift it out.
• Seat the new baffle in the slots and secure with the screw(s). Hand-spin the drum to confirm clearance before use.