Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Refrigerator not cooling? Compressor won't start? This inverter board controls compressor speed and cooling. Moderate DIY repair with electrical testing.
Took out the old part and replaced it with the new part. Now all is working. Thank you so much. Read more
Fix a refrigerator that won't cool or has freezing issues. This main control board regulates temperature and system cycles. Moderate DIY repair.
This was a newer GE Monogram side-by-side unit that used an inverter compressor. I removed the inverter and used an ohmmeter to measure the resistance of each of the three windings. They were all very close to one another: about 6.8 ohms per winding. I concluded that the compressor was probably not at fault. The inverter kind of burned or chemical-ish, and, when opened, showed an electrolytic capacitor had burst. I replaced the inverter with an overnight part from Amazon. It was the same... Read more
Plastic water line that connects the water inlet valve to the ice maker. Replace if cracked, leaking, or damaged. Includes installation video.
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,... Read more
Replacement vegetable pan cover for refrigerator door storage compartment. Needed when original lid is cracked, broken, or missing. White plastic cover.
Door bins were easy to install by removing old ones and slipping in the new ones. Took only a few minutes to complete repair. Lid also was easy to install with only one screw to remove and replace the new one. Read more
Fix a refrigerator that won't cool or has temperature issues. This main control board manages cooling cycles, fans, and compressor operation. Moderate DIY.
Replaced the Main Control Board Assembly along with the evaporator and condenser fan motors. I thoroughly cleaned the very very dirty condenser with a 4$ brush offered by the parts specialist and while I was at it, I changed the door seals and replaced one of the door trays. Beats the crap out of spending $10,000 on a new refrigerator that because of Covid 19 wouldn't be here before the middle of November. Thank you Matt for your help! Read more
Rubber grommet seals the ice maker fill tube where it enters the refrigerator cabinet. Replace if cracked, brittle, leaking, or missing to restore seal.
White door bin shelf for refrigerator interior door storage. Replace cracked, broken, or missing door bins. Slides into place for quick installation.
The door bins I ordered from Appliance Parts were genuine GE replacement parts. The old bins were easily removed and the new bins slid right in. Read more
Deep door bin mounts to the right side of your refrigerator door for tall container storage. Replace cracked, broken, or missing bins to restore space.
Refrigerator light not working? This light bulb socket holds the bulb securely and provides electrical connection. Easy DIY repair with video guide.
Had some confusion of what part I needed, needed the one with the motor and thermostat. Fortunately, I've been fixing wiring for many years, I simply cut the new motor out of the harness, and used that nice glue-inside-heat-shrink tubing to seal the soldered 'Western Union' style splices. New light socket and lamps fit fine, worked fine, new motor is fine, problem resolved. FYI: Look closely at the wiring in you unit, there are two wire harnesses, one feeds the light, the other feeds the motor... Read more
Fix refrigerator lights that won't turn on when you open the door. This light door switch activates interior lighting. DIY repair in under 30 minutes.
I tested the conductivity across the door switch and found the switch had failed. Read more
Fix a refrigerator that won't cool, beeps constantly, or has no power to the compressor by replacing the main control board. Moderate DIY repair.
EVERY THING WORKS, PUT IN NEW CONTROL BOARD AND WATER VALVE. VERY PLEASED. Read more
White plastic door bin for refrigerator door storage. Replace cracked, broken, or missing bins to restore door organization and prevent spills.
Replaced them. The new freezer gasket was a challenge to get it to seal. I used a putty knife to pry the old gaskets off. The refrigerator gasket was easy. Read more
Fix a refrigerator that won't start or clicks repeatedly. This compressor capacitor stores energy to start the motor. DIY repair typically takes 30 minutes.
Replaced overload, and capacitor Read more
Plastic tubing that routes water through your refrigerator's system. Replace if cracked, brittle, kinked, or leaking to restore proper flow and prevent damage.
I replace the water inlet valve in my refrigerator about 8 months ago. About a week ago, the old plastic water line broke. I forgot how the water line connector worked and broke the valve trying to pull it out. I got a new valve and replacement water line, and it went in easily, just like the video said. Morals of the story: 1. Know how to remove the old plastic water line. I could have saved myself the price of a new valve if I'd remembered how the connector worked. Unless you have a really... Read more
Replacement door closure spring for refrigerators and freezers. Installs in top door mechanism to provide tension for self-closing action. Gold finish.
Downloaded the Technical Service Guide and followed the instructions for removal of the Door Closure Mechanism. Items the instructions failed to mention: 1. Although they took the trouble to call for removal of a 3/16" Allen head bolt, they referred to the closure mounting bolts as just "bolts". In fact, they were T-25 bolts. If I didn't have a Torx kit, it would have required a trip to the Orange Big Box Home Center to complete the job. 2. Although the instructions don't describe this step,... Read more
No water from dispenser or ice maker? This water inlet valve assembly controls water flow into your refrigerator. DIY-friendly repair in about 2 hours.
I purchased a replacement water valve assembly and a replacement water reservoir from AppliancePartsPros and researched some online videos to learn how to replace both these items, including all new water tubing. In the online process, I utilized "how-to" videos from AppliancePartsPros, too. Installing the water reservoir proved the most tricky, mostly because it was tricky feeding the tubing under the refrigerator. By comparison, installing the valve assembly and running new tubing for it was... Read more