Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Condenser Fan Blade is an OEM part for GE refrigerators. It is responsible for moving air across the condenser coils to help dissipate heat, allowing the refrigerator to maintain the proper cooling temperature. This fan blade ensures efficient operation of the cooling system by facilitating proper airflow.
You should replace this condenser fan blade if it becomes damaged, warped, or fails to move air effectively. Common causes of a bad fan blade include physical damage from debris, wear and tear over time, or warping due to prolonged exposure to heat.
Symptoms of a bad condenser fan blade include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more
The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing.
Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.
Symptoms of a bad Lid Bumper include:
Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more
This OEM Replacement Part is an ice container assembly for GE side-by-side refrigerators from 1998 models and newer with 24 to 27 cubic feet capacity. The assembly includes a 12 3/8” wide x 12 3/8” long x 14 5/8” tall ice bucket with an integrated auger to rotate and move ice into the dispenser chute. The auger within the assembly helps move the ice cubes forward, enabling easy access and dispensing.
Causes of a bad assembly can include wear and tear over time, damage from frequent use or mishandling, and issues with the auger motor or blades that prevent proper ice movement.
Symptoms of a bad Ice Bucket and Auger Assembly include:
Screwdriver Read more
The GE Door Light Switch is an OEM Replacement Part that serves as the Freezer Door Fan and Light Switch. The switch is made from metal, wiring, and plastic. It plays an essential role in energy conservation by turning off the light when the refrigerator or freezer door is closed
Over time, the door light switch can wear out or fail due to frequent use, exposure to moisture, or electrical issues. When this happens, the interior light may not function correctly, which can hinder visibility inside the refrigerator.
Symptoms of a bad door light switch may include:
This switch is compatible with select GE and Hotpoint models.
Pop out the old switches with a putty knife pressing down on the tab, grabbed with pliers to pull out, disconnect the wires and connect new switches, pressing back in place. Read more
The Door Bin Assembly is an OEM component for GE refrigerators. This component is designed to attach to the interior side of the refrigerator door, providing additional storage space for items such as condiments, beverages, and other frequently accessed products. The assembly is crafted to hold items securely while optimizing space usage within the refrigerator.
Causes for a malfunctioning Door Bin Assembly can include general wear from frequent use, excessive weight placed in the bin leading to cracks or breaks, or issues with the clips or connectors that attach it to the door.
Symptoms of a bad Door Bin Assembly include:
I bought a new Read more
The Condenser Fan Motor is an OEM part for GE refrigerators. It is designed to circulate air through the condenser coils, helping to dissipate heat and keep the refrigerator's internal components cool. This ensures efficient operation and prevents the compressor from overheating, which is essential for maintaining the refrigerator's performance and longevity.
You should replace the condenser fan motor if it becomes faulty. Causes of a bad fan motor can include electrical failures, wear and tear from regular use, or blockages that cause the motor to overheat or burn out. A malfunctioning fan motor can lead to inadequate cooling, increased energy consumption, and potential damage to other refrigerator components.
Symptoms of a bad condenser fan motor include:
I googled the issue and read several articles. Most started with cleaning the coils (which mine are on the bottom) (19yr old Kenmore 363.9557812). I had not really ever cleaned them well, vacuuming did little. I had to remove the cardboard cover off the back of the frig, and blew them clean (front to back). Once that was done, I started cleaning from the back and noticed the fan wasn't turning week (condensor fan). Blew it out too, have it a good soon with a pencil, it puffed out a bunch of... Read more
The Compressor Inverter Board is an OEM part for GE refrigerators. It controls the operation of the compressor, adjusting its speed to optimize cooling efficiency and energy consumption. This component is crucial for maintaining consistent temperatures inside the refrigerator and ensuring smooth, reliable performance.
Causes of a bad compressor inverter board can include electrical surges, overheating, or component failure due to wear and tear. When the inverter board malfunctions, it can lead to inadequate cooling and increased energy usage.
Symptoms of a bad Compressor Inverter Board include:
Took out the old part and replaced it with the new part. Now all is working. Thank you so much. Read more
The Ice Bucket is an OEM replacement part for GE refrigerator-freezers. It collects and stores freshly produced ice within the freezer compartment. This bucket is made of white plastic and is approximately 13 inches in length and 9 inches wide at the widest point.
Causes of a bad ice bucket can include wear and tear over time, or damage to the bucket or its components due to mishandling or impact. Please note, this is just the ice bucket and does not include the auger or auger motor.
Symptoms of a bad ice bucket include:
I ordered the bucket and it was on my door step the next afternoon, Read more
This factory gasket and label assembly for side-by-side refrigerators restores the proper seal where specified and replaces the original identification label. It helps prevent leaks at that interface and preserves correct product information after service. What it does:
The Main Control Board Assembly is an OEM replacement part for GE refrigerators. This board controls and monitors all critical functions including temperature regulation and cycle operation. Symptoms of a bad control board include:
Causes can be short circuits, liquid damage to circuitry, or failure of electronic components due to prolonged use. Defects are often not repairable and replacement is necessary. This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
This was a newer GE Monogram side-by-side unit that used an inverter compressor. I removed the inverter and used an ohmmeter to measure the resistance of each of the three windings. They were all very close to one another: about 6.8 ohms per winding. I concluded that the compressor was probably not at fault. The inverter kind of burned or chemical-ish, and, when opened, showed an electrolytic capacitor had burst. I replaced the inverter with an overnight part from Amazon. It was the same... Read more
The Ice Maker Water Line is an OEM replacement part for GE refrigerators. It is an important supply line that delivers water from the main water source to the icemaker component. The water line allows water to flow smoothly, facilitating the icemaking process.
Causes of a bad water line can include cracks or punctures from impact or bending, mineral deposits and corrosion building up inside the line restricting flow, or improper connection fittings causing leakage.
Symptoms of a bad ice maker water line include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,... Read more
The Main Control Board Assembly is an OEM part for GE refrigerators. This part manages various functions such as temperature regulation, defrost cycles, and the operation of fans and compressors.
Causes of a bad control board include electrical surges, component wear and tear, or moisture damage.
Symptoms of a bad main control board include:
Replaced the Main Control Board Assembly along with the evaporator and condenser fan motors. I thoroughly cleaned the very very dirty condenser with a 4$ brush offered by the parts specialist and while I was at it, I changed the door seals and replaced one of the door trays. Beats the crap out of spending $10,000 on a new refrigerator that because of Covid 19 wouldn't be here before the middle of November. Thank you Matt for your help! Read more
The Spring Closure is an OEM part for GE refrigerators. This spring aids in the automatic closing of the refrigerator door, ensuring it seals tightly after each use to maintain optimal internal temperatures.
Causes of a bad spring closure can include regular wear and tear, corrosion due to moisture, or accidental damage that compromises its function.
Symptoms of a bad spring closure include:
1) Remove toe kick panel - 2 Philips head screws 2) Lay down on floor. This might be the hardest part of the repair from some people! 3) Remove broken spring, no tool required. 4) Using your fingers, slip one end of new spring into hole on lever arm. (If you're not sure how it should go, look at the spring on the other door, assuming you have a side-by-side.) 5) Hook the other end of the spring around a round-shank screwdriver. (Don't even bother with pliers. You will disregard this advice... Read more
The Gal Bin FF Asm is an OEM part for GE refrigerators. This gallon door bin is designed to hold large containers, such as gallon jugs, in the refrigerator door, maximizing storage space and keeping items easily accessible. The door bin measures approximately 20 inches x 7 inches x 4.5 inches.
Common causes of a bad bin include cracks from overloading, breakage due to impact, or wear and tear from frequent use.
Symptoms of a bad gallon bin assembly include:
Replaced it with a new one Read more
This halogen light bulb restores bright, reliable illumination inside your appliance, making it easier to check food and read controls. Replace a burned-out or broken lamp to bring back safe, convenient visibility while cooking.
Had to remove all three food drawers and the back panel behind the drawers (4 screws). The water tank comes with the associated tubing which would typically require access to the back of the fridge to run the new lines. Instead I clipped the existing lines inside the fridge. Then I clipped the lines off the new tank so they would line up with the old lines. I then used a 5/16" OD compression coupling (Lowes or Home Depot) to connect the ends of the tubing together. The joined tubes are... Read more
The FF Door Gasket 42 is an OEM part for GE refrigerators. This gasket creates a seal around the refrigerator's fresh food compartment door, preventing warm air from entering and ensuring that the cool air stays inside. This helps maintain the internal temperature and improves energy efficiency.
Common causes of a bad door gasket include constant opening and closing of the door, exposure to food spills, and general wear and tear. A compromised gasket can lead to air leaks, reducing the refrigerator's cooling efficiency and potentially causing food spoilage.
Symptoms of a bad door gasket include:
Found model number of refrigerator and input into search which brought me to parts diagram of refrigerator. From there it was easy to find the correct part numbers and also decided to change the door springs. You guys made it easy to find the correct parts and the express shipping arrived on the promised day. The installation videos were also helpful and now my 2003 refrigerator runs good as new. I will let all my friends and relatives know what a great site you have and what great service you... Read more