Need Help?
Call or text
The Defrost Heater is an OEM replacement part for Whirlpool French door refrigerators. It is an electric heating element strategically placed within the refrigerator compartment and freezer liners. This component aids in preventing excessive moisture buildup from condensation formed during normal operation.
Causes for heater failure include standard component degradation from prolonged use. Exposure to moisture accumulating over time can damage wiring insulation or short-circuit coil filaments as well.
Symptoms of an inadequate defrost heater involve:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Replaced heater and defrost timer. All parts fixed perfectly with no modifications. I recevied my parts in 2 days!! Great service, great prices. I will return to your site when i need parts and advice again. Thank you!! Read more
The Heater Assembly is an OEM part for Bosch dishwashers. This part heats the water during the wash cycles, ensuring that dishes are cleaned effectively and sanitized.
Causes of a bad heater assembly can include electrical issues such as short circuits, mineral buildup from hard water, or wear and tear from regular use.
Symptoms of a bad heater assembly include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Ordered new heater/thermostat piece. Read more
The Broil Element is an OEM part for Whirlpool ranges. This heating element is located at the top of the oven and is responsible for providing intense, direct heat for broiling.
Causes of a bad broil element can include electrical faults, repeated exposure to high temperatures, and damage from food spills or cleaning.
Symptoms of a bad Broil Element include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
I ordered a new one Read more
The Element Surface Dual is an OEM part for Frigidaire cooktops. This dual surface element provides flexible cooking options by offering two heating zones within a single element, allowing for efficient cooking with pots and pans of various sizes.
Causes of a bad dual surface element can include wear and tear from regular use, overheating, or damage from spills and impact. A malfunctioning element can result in uneven heating or failure to heat entirely, impacting your cooking experience.
Symptoms of a bad dual surface element include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Ordered the dual element,only took 1 day for delivery,replaced element in about 15 min.and we're back in business Thanks Read more
The 8" Surface Element is an OEM part for GE ranges. It is an 8-inch heating element that fits into the cooktop to provide heat for cooking.
Causes of a bad surface unit include wear and tear from regular use, damage due to heavy cookware, or electrical issues that prevent the element from heating correctly.
Symptoms of a bad surface unit include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered new heating coils for stove Read more
The Electric Dryer Heating Element is an OEM replacement part for Frigidaire dryers. Located within the dryer drum cavity, this component produces the necessary hot air to evaporate moisture from wet laundry. Terminal Size: 5/16 inch. For the 1/4 inch terminal size order 5300622032. This electric dryer heating element restring coil does not include the heater housing insulators 131472100 or the terminal block 3202786. Causes of element failure may be corrosion from atmospheric elements accumulating over time, cracks in filament coating from repetitive heating/cooling stresses, or exhaustion from workday after workday of extended use. Symptoms of a bad electric dryer heating element include:
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
My appliance repair guy checked out the problem, but the stack washer dryer required the contractor to dismantle the cabinet to allow the repair to occur. So i wanted the parts available for the repair, so we would not have to have the dryer pulled apart in a small space for an extended time i ordered the parts on Friday afternoon and they arrived at my home before noon on Saturday! The contractor and the repairman were able to coordinate the repair on Tuesday morning, and though the... Read more
The Surface Heating Element is an OEM part for GE ranges. It is located on the cooktop and is activated when you turn on the corresponding burner knob. It generates heat to cook or heat food placed on the cookware.
Causes of a faulty surface heating element can include regular wear and tear, electrical malfunctions, or physical damage. These factors can result in issues such as uneven heating, the element not reaching the desired temperature, or complete failure of the heating function.
Symptoms of a bad surface heating element may include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Ordered new drip pans and burners. Read more
The Element Broil Assembly is an OEM replacement part for GE electric ranges. This assembly holds and secures the upper heating element that provides intense heat for broiling food items directly above the heating coils. Proper functioning of the element broil assembly allows for consistent and efficient broiling performance. Symptoms of a bad element broil assembly include:
Causes of failure can be normal wear over time, damage from harsh cleaning chemicals, or issues like bending or warping that prevent secure mounting of the broiler element. This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced broiler element with new one. We had difficulties in locating the correct element for my oven. Read more
The Heating Element is an OEM component specifically designed for Whirlpool brand electric dryers. It contains coils that produce hot air used throughout drying cycles.
Symptoms of a failing heating element include:
Potential causes involve typical coil wear from repeated heating and cooling over many years. Mineral scale buildup or poor ventilation can diminish heating efficiency as well.
Compatible models include some brands produced by KitchenAid, Maytag, Amana, and Kenmore.
Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping! Read more
The Defrost Heater Assembly is an OEM replacement part for Whirlpool refrigerators. Located behind the freezer walls, it prevents ice buildup during automatic defrost cycles. Consistent performance is needed to maintain ideal temperatures. The defrost thermostat is included in the assembly.
Causes of a bad defrost heater assembly can include overheating from being covered in frost, corrosion from moist environments, or broken filaments due to vibration.
Symptoms include:
Compatible with KitchenAid, Jenn-Air, and other brands, it ensures prolonged efficiency.
After removing the back cover in the freezer compartment with a Phillips screwdriver, I saw the evaporator coils completely iced up, which blocked all airflow. A hair dryer was used to completely melt the ice, which took about 15 minutes and filled up the drain pan almost to the top. A quick ohms check with a VOM showed the defrost heater elements were burned out. The wires for these elements are routed along the right side of the coils behind the cover lip, so after cutting a tie-wrap I... Read more
Restore dependable oven performance with this lower bake element. It replaces a burned-out element so your electric oven can heat from the bottom, reach set temperatures, and bake or roast more evenly. What it does:
I found my model number on AppliancePartsPros.com very easily and found the new element and temperature sensor kit. The temperature has always been a little off, so I figured I needed the new sensor. I am glad I also ordered the element. When I took everything apart I discovered that the wire connector had burned off and the element was no good anymore. I had a spare connector in my tool box, so I crimped it on, and put everything back together. Now the oven heats quickly and I believe it is... Read more
The Bake Unit Assembly is an OEM part for GE ranges. This part provides the heat necessary for baking by distributing even heat throughout the oven cavity. The element measures approximately 16-3/4"x18'.
Causes of a bad bake unit can include wear and tear from regular use, damage to the heating element, or electrical issues within the unit.
Symptoms of a bad bake unit include:
Easy fix. Both elements replaced while I was at it, so all new. Figured if one went the other was going to follow. CIRCUIT BREAKER OFF. Removed the back metal panel with my nut driver for the hex head screws. Note where the panel may slip under tabs for support. Remove slip on electrical connections on upper and lower elements. May need a pliers. (I did not want to just pull the element and the wires into the oven with the element and remove them there, like a technician would do. After 15... Read more
The Defrost Heater is an OEM replacement part for Whirlpool refrigerators. It removes accumulated frost and ice from evaporator coils to maintain efficient cooling performance.
Symptoms of a faulty heater include:
Causes can be wear from repetitive defrost cycles. Environmental factors like humidity fluctuations may also degrade insulation.
This OEM heater is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper refrigerator models.
After we moved into our new home, we realized that the freezer was very cold and the fins were frosting over, and the refrigerator wasn't cold. We had to take it apart and manually defrost it about once every 8 to 10 days. After research online, we found Appliance Parts Pros videos, which clearly explained how to fix it ourselves, a savings of at least $1,000 or more, since a new one of this size would have been in the arena of $1,200 to $2000. We ordered the three most likely parts to be bad,... Read more
The Bake Element is an OEM replacement part for Frigidaire electric ranges. This component provides direct heat from an internal coil or rods within the oven cavity, allowing for baking and other heated cooking functions.
Symptoms of a bad bake element include:
Causes stem from typical wear over years of heating use. Cracks in insulated surfaces or broken coil sections can cause inconsistencies.
This OEM Frigidaire part is also compatible with ranges sold under the Electrolux, Gibson, Kelvinator, and various Kenmore brand names.
Turns out these wall ovens have a pretty common problem, the baking element relay on the back of the control board solder joint fails. We have had this happen on several units recently as we manage several apt complexes. So it was not the baking element at all, just faulty solder joints or something makes the baking element relay lose its solder connection. Read more
The Broil Element is an OEM part for GE ovens. This component is responsible for providing the high heat necessary for broiling foods. Located at the top of the oven cavity, the broil element delivers direct, intense heat to cook and brown food items efficiently.
Causes of a bad broil element can include prolonged use, electrical malfunctions, or physical damage from impacts or spills. Over time, the element may burn out or develop cracks, leading to diminished performance.
Symptoms of a bad broil element include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Would advise before doing this repair to watch the video for it. It is not a plug in connection anymore like older ovens. The key is to keep the connecting wires from the oven from falling or pulling into the inner wall of the oven. The wires may not come very far out away from the wall of the oven so make sure to secure them. The video shows a good way to do that. If you have an in wall oven this is very important because it would hard and time consuming to pull the oven out of the wall to... Read more
This broil heating element mounts at the top of the oven cavity to provide intense, direct heat for broiling and to assist with preheating. Replacing a failed element restores even broiling performance and helps the oven reach temperature properly.
Replaced the element. 1st- Turn off the power to the appliance. The cook top is held on with two screws - access the screws by opening the oven door. Cooktop is hinged, so just pull up near oven door and hold in place with, say, a three foot long stick. The elements are held in place by bracket attached to the cooktop. Remove the bracket by removing the two socket screws. The element is aligned to the bracket with three locking tabs. Remove the tabs with pliers. I broke off one the... Read more