Inlet Valve Parts

This water inlet mixing valve controls and blends the hot and cold water entering your washer for proper fill temperature and water level. A worn valve can cause fill problems or unwanted leaks into the tub.

• Regulates hot and cold water flow to achieve the selected temperature
• Opens and closes electrically during fill cycles
• Common symptoms: slow fill, no fill, fills with only hot or only cold, or water seeping into the tub when the washer is off
• Electrical coil-operated design for reliable operation

• Unplug the washer and shut off both water supplies before servicing
• Place a towel or pan to catch residual water when disconnecting hoses
• Note hose positions (hot/cold) and wire connectors for correct reassembly
• After installation, check for leaks and run a test fill cycle

The Water Inlet Valve is an OEM component for Whirlpool dishwashers. As the critical connector between the home supply lines and the dishwasher itself, this valve oversees the entry of water into the machine for wash and rinse cycles.

Causes of inlet valve malfunction include mineral deposits accumulating inside the valve body or worn seals no longer maintaining a tight closure following years of usage. This places increased strain on internal mechanisms. 

Symptoms consist of:

• Slow or irregular water fills failing to reach proper levels
• Fluctuating water pressure inputs 
• Drips or continuous leaks at the water connection
• Inability of cycles to advance beyond initial fill stages

This Whirlpool OEM replacement is compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers as well.

This triple water inlet valve regulates the hot/cold water supply and dispenser fills in your washing machine. Replacing a failing valve restores proper fill control and temperature selection, helping address slow fills, no fill, or water seepage into the tub.

• Regulates incoming water flow as directed by the washer's control system
• Mixes hot and cold supply to achieve the selected temperature
• Routes water to the tub and dispenser during appropriate cycles
• Common symptoms include no/slow filling, only hot or only cold working, or water dripping into the tub when the washer is off

• Disconnect power and turn off both water supplies before servicing
• Place towels to catch residual water; label and disconnect hoses and wire connectors
• Inspect inlet screens and flush supply lines before reconnecting
• Restore water and power, then run a fill test and check all connections for leaks

This water inlet valve assembly regulates when and how much water enters the appliance. Replacing a failing valve restores proper filling or water delivery and helps resolve no-water, slow-fill, or drip-through-the-valve issues.

• Opens and closes to control incoming water flow as commanded by the control system
• Directs water to the appliance's water circuit for proper operation
• Common symptoms: no water entering, weak/slow flow, water seeping in when off
• Physical clues: cracked housing, mineral buildup, or a valve that hums but doesn't pass water

• Disconnect power and shut off the water supply before servicing
• Keep towels handy; relieve line pressure before disconnecting tubing/fittings
• Transfer connectors and any mounting hardware one-for-one; ensure tubing is fully seated and use appropriate thread sealant if your model uses threaded fittings
• Restore water, check all joints for leaks, then restore power and run a test cycle

This vacuum break is the washer's water-inlet anti-siphon fitting. It maintains a required air gap so the tub fills properly without drawing used water back into the supply, helping prevent leaks and backflow issues.

• Maintains an air gap at the inlet to prevent backflow/siphoning into household water lines
• Helps ensure consistent, unobstructed water flow into the tub
• Replaces a cracked, clogged, or leaking vacuum break at the fill area
• Common symptoms include leaks from the rear/top during fill, visible cracks, or restricted/noisy fill

• Unplug the appliance and shut off both water supplies before servicing
• Access the fill/inlet area; note hose routing and part orientation
• Remove hose clamps/hoses and the old vacuum break; install the new part and secure clamps
• Restore water and power, then run a fill test and check carefully for leaks

This refrigerator water inlet valve controls the incoming household water supply to the dispenser and icemaker. When energized, it opens to allow water flow, helping restore reliable dispensing and proper ice production.

• Regulates water flow to both the dispenser and the icemaker
• Common failure signs: no or slow water dispensing, no ice production, small/hollow ice cubes, valve humming but no water, or water leaking from the valve body
• Electrical solenoid-operated design opens only when signaled by the control system
• Helps maintain consistent water delivery and ice fill levels

• Disconnect power and turn off the household water supply before servicing
• Place a towel or pan to catch residual water; relieve line pressure carefully
• Transfer tubing and wire connectors one at a time to the new valve to avoid mix-ups
• Check for leaks after installation; do not overtighten compression fittings

This assembly includes the refrigerator's water inlet valve mounted on its bracket. It regulates water flow from the household supply into the refrigerator's water system to restore reliable filling for the ice maker and/or dispenser.

• Controls water flow by opening/closing the valve when the refrigerator calls for water
• Helps deliver proper water during fill cycles and shuts off cleanly after
• Common symptoms: no ice production, no water from dispenser, slow/weak flow, leaks at the valve, or loud buzzing/chattering during fill
• Mounts in the original location using the included bracket for secure fit

• Disconnect power and shut off the water supply before servicing
• Relieve line pressure (dispense water if equipped) and keep a towel handy for residual water
• Move tubes and wire connectors to the new valve one at a time to maintain placement
• Restore water and power, then check all connections for leaks and proper operation

Refrigerator primary ice and water dual coil water inlet valve. For the filter valve order WR57X10024. For the assembly including both the primary and filter valve having the short bracket order WR57X10026. For the assembly including both the primary and filter valve having the long bracket order WR57X10022.

The Dishwasher Float Cover Assembly is essential for maintaining proper water levels in your dishwasher. This genuine OEM part ensures reliable performance by accurately regulating the float mechanism. Designed to fit a variety of Samsung dishwasher models, it guarantees a perfect fit and seamless integration with your appliance. The Float Cover Assembly helps prevent water overflows and ensures efficient washing cycles, enhancing the longevity of your dishwasher. Its durable construction withstands daily use, providing consistent operation over time. Easy to install, this part allows you to quickly restore your dishwasher's functionality without the need for professional assistance. By choosing this genuine OEM part, you benefit from the quality and reliability that Samsung is known for. Trust the Dishwasher Float Cover Assembly to provide consistent and dependable operation, ensuring your dishes come out clean every time.

Door solenoid with plunger.

The Water Valve is an OEM component for GE side-by-side refrigerators. Located internally within the water dispenser assembly, this valve controls water flow to the ice maker and dispenser.

Causes of a faulty water valve can include mineral buildup restricting flow over time, gasket wear from constant opening/closing, and electrical faults impacting the valve's solenoid.

Symptoms requiring replacement are:

• Slow or inconsistent water flow from the dispenser  
• The ice maker fails to fill or produces irregular cubes
• Water leaking into areas it should not reach

This OEM GE part fits additional appliances under the same household brand family such as Hotpoint, RCA, and comparable Kenmore models.

Water inlet valve kit replaces older valves that used the "Y" type water lines.

This is the water inlet valve that controls the flow of household water into your washer during fill and rinse. Replacing a failing valve restores proper filling performance and helps stop unintended water entry when the machine is idle.

• Opens and closes to allow the correct amount of water into the washer as commanded by the control
• Failure can cause no fill, slow/long fill, or continuous filling/fill when off
• Leaks from the valve body or hose connections indicate the valve should be replaced
• Electrical coil failure may lead to intermittent or no operation

• Disconnect power and shut off the water supply before servicing
• Place a towel or pan to catch residual water; label and disconnect hoses and wiring
• Install the new valve; transfer any brackets or clips from the old part if needed
• Restore water and power, then check all connections for leaks and run a test fill

This washer water inlet valve assembly regulates and shuts off household water flow into the machine during fill cycles. Replacing a weak or leaking valve restores proper filling performance and helps prevent slow fill, no-fill, or overfilling issues.

• Opens when energized to allow water into the washer; closes to stop flow
• Directs incoming water to the dispenser/tub as commanded by the control
• Failure symptoms can include no fill, slow fill, continuous filling, or water leaking into the tub between cycles
• May trigger fill-related error or fault notifications when sticking or restricted

• Unplug the washer and shut off the water supply before servicing
• Place a towel or shallow pan to catch residual water; relieve hose pressure
• Note hose and wire connector positions for correct reassembly
• Inspect inlet screens and hose washers; reconnect fittings securely and check for leaks after installation

This replacement housing is the molded support/cover used in select appliances to secure and protect its mated components. It restores proper alignment and sealing when the original housing is cracked, warped, or has broken mounting tabs. What it does

• Provides a rigid mount and enclosure for the associated component(s)
• Maintains correct alignment and sealing to prevent leaks or air loss
• Protects internal parts from damage and vibration
• Common failure signs: visible cracks, broken tabs, rattling, poor fit, or leakage around the assembly

• Housing

• Disconnect power before servicing; if the part interfaces with water, shut off the water supply
• Note orientation and transfer any screws, clips, seals, or O-rings from the original part
• Inspect mating seals and fittings; replace any worn gaskets to ensure a proper seal
• After reassembly, restore power/water and test for proper operation and any leaks or noise

This mixing valve bracket secures the washer's water inlet valve to the cabinet, keeping the valve steady and properly aligned for hose connections. A correct-fit bracket helps reduce rattles and potential leaks caused by a loose valve.

• Mounts and supports the water inlet/mixing valve on the rear panel
• Maintains proper alignment for hot and cold supply connections
• Helps reduce vibration and rattling noises during fill
• Common signs it's needed: loose or dangling valve, misaligned hose connections, or leaks at the valve fittings

• Disconnect power and turn off both water supplies; relieve pressure before removing hoses
• Access the rear of the washer and remove fasteners securing the existing bracket/valve
• Transfer the valve to the new bracket, reusing the original hardware
• Reattach the bracket to the cabinet, reconnect hoses, restore power and water, then check for leaks