Obstructed Lid Switch Door Lock Parts
Genuine Ge part
By: Ge
Part Number: WD21X10519
The Flood Switch Assembly is an OEM part for GE dishwashers that is responsible for detecting water levels in the dishwasher's base, preventing potential flooding by shutting off the water intake if an overflow is detected. This helps in avoiding water damage to your home and ensuring the dishwasher operates normally.
Symptoms of a bad Flood Switch Assembly include:
- The dishwasher not filling with water
- Water not draining properly
- The dishwasher stops during a cycle
Causes of a bad flood switch assembly can vary from debris accumulation affecting the float's movement to electrical issues within the switch mechanism. Over time, wear and tear on the float or switch can lead to failures.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The dishwasher would not fill with water Jeffrey J. • Ramsey , MN • December 02, 2014
Removed the lower rack, removed the lower wash arm, removed the lower coarse filter, removed fine filter ( still no tools require to this point). Removed two 1/4" head screws with nut driver to then remove float switch, unplugged float switch, plugged in new switch, reinstalled filter, etc. This is a 5 minut job!
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 240337712
The Dairy Door is an OEM replacement part for Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.
Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.
Symptoms of a bad dairy door are:
- Difficulty opening or closing the door smoothly
- Door alignment issues where it does not sit flush in the frame
- Leaks or moisture inside the dairy storage area
- Damage or cracks in shelf supports or gasket seals
This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.
NOTE: For white use 240337701
Do-It-Yourself Stories from Customers like You
It was brand new fridge until tenant move out it was dirty broken door bar retainer & missing dairy door the rest is still in good condition Jon S. • San Pedro , CA • January 05, 2015
So I look up on the internet and search for Frigidaire then your ads comes up: AppliancePartsPros.com. Search was easy, put the model number, enter, then the picture comes up & question ask: where do you think the missing/ broken parts that what you need the location at. Very easy! Then I ordered the parts and I got it in 2 days!.. Wow..! After I put it on, my Fridge look like brand new.
Thanks AppliancePartsPros..!
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10434452
The Dual Element Control Switch is an OEM part for Whirlpool ranges and cooktops. This control switch is designed for models with dual heating elements, allowing you to adjust the size of the heat output on the LF element depending on whether you are using the inner or outer element.
Causes of a bad Dual Element Control Switch can include electrical issues such as short circuits or worn contacts, physical damage to the knob or switch mechanism, or problems with the internal components that regulate power.
Symptoms of a failing Dual Element Control Switch include:
- Inability to change between the inner and outer elements
- Irregular heating or lack of response when adjusting the temperature
- The switch feeling loose or not engaging properly
- Burner not heating even though the switch is turned on
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Large front burner stayed on high power. Lou G. • Mansfield , TX • October 12, 2019
Watched the attached video, then followed directions and installed the part ordered.
Read more
More
$77.29
- Compare At:
-
$91.98
- You Save:
-
$14.69
Genuine Lg part
By: Lg
Part Number: EBF49827801
The Washer Door Lock Switch is an OEM part for LG washing machines. This critical safety feature locks the washer door during operation to prevent it from being opened, which ensures safety and proper functioning. The door lock switch also communicates with the washer's control system to indicate that the door is securely closed and the machine can begin its cycle.
Symptoms of a bad Washer Door Lock Switch include:
- The washing machine refusing to start, despite the door appearing to be closed.
- The door failing to lock properly, or the lock releasing prematurely during a cycle.
- Error messages on the washer's display related to door closure issues.
Causes of a bad door lock switch can include mechanical failures such as worn or damaged locking mechanisms, electrical issues like faulty wiring or failed solenoids, or alignment problems that prevent the door from engaging the switch properly.
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Lid or door won't close
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
E0 code replaced drain pump and circulating motor the door switch assembly was separate issue. Ann M. • Coral Springs , FL • May 09, 2020
Superfast parts delivery. Got packages by the second day. Videos were extremely helpful and well done; we couldn't have done without them although we came across slight differences in our machine and found workarounds. Our machine did not drain the water so I drained the water manually via drain tube at bottom of the machine and checked the filter for blockage. All clear so I read articles on the internet and watched videos and took a chance on replacing the drain pump and circulating motor...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23
Genuine Whirlpool part
By: Whirlpool
Part Number: W11429587
The Dryer Door Catch is an OEM part for Whirlpool dryers. It keeps the dryer door securely closed during operation.
A bad door catch can occur due to regular use, wear and tear, or accidental damage. If you notice that the dryer door is not staying closed or is popping open during the drying cycle, it may indicate a problem with the door catch.
Symptoms of a bad door catch include:
- The dryer door not staying closed
- Difficulty in properly latching the door shut
- Loud banging noises or vibrations
Replace your faulty dryer door catch with this genuine OEM part to restore your dryer door.
This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Dryer door catch broke, unable to close the door! Stella H. • Beverly Hills , FL • April 10, 2020
I watched your video and had it fixed in less than 1 minute!
Read more
More
$20.95
- Compare At:
-
$25.14
- You Save:
-
$4.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3149404
The Infinite Switch is an OEM part for Whirlpool ranges and cooktops. This part controls the temperature of the small burner on electric ranges and cooktops by regulating the power supplied to the burner. The infinite switch allows for precise temperature settings, providing the flexibility to cook a wide variety of dishes by adjusting the heat level as needed.
Over time, infinite switches can wear out or malfunction, leading to issues with controlling the burner's temperature.
Symptoms of a bad Infinite Switch include:
- The burner does not heat or heats intermittently
- The burner heats to full power regardless of the setting
- Inability to adjust the burner's temperature accurately
- Physical damage to the switch, such as cracking or melting
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Burners were working correctly most of the time but would stay in the on position (high )periodically and would not shut off automatically for the temperature you set the burner for Daryl B. • Gloucester , VA • August 12, 2021
Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,...
Read more
More
$50.23
- Compare At:
-
$59.77
- You Save:
-
$9.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 316452758
This Outer Oven Door Glass is an OEM replacement part for Frigidaire ranges. It is the outermost glass panel on the oven door. It acts as a barrier to prevent heat from escaping the oven. If the glass is cracked or broken, it can lead to heat escaping and uneven cooking.
A broken outer oven door glass can be caused by a variety of factors, including accidental impact, thermal shock, or improper cleaning.
Symptoms of broken door glass can include:
- Cracks or shattered glass
- Difficulty maintaining the temperature inside the oven
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The outer door glass shattered when opening the door Robert C. • Lake Ozark , MO • May 21, 2017
I searched for my appliance and the problem. Applianceparts.com was one of the results. There was one fix-it help from a previous customer. I ordered the piece of glass and somehow it arrived at my home the VERY NEXT DAY! I couldn't believe it. So I followed the exact instructions left by the one person that wrote in. I removed 2 screws at the bottom of the door and 4 at the top which enabled me to disassemble the front and back of the door. I then cleaned all the shattered pieces of glass...
Read more
More
$132.95
- Compare At:
-
$158.21
- You Save:
-
$25.26
Genuine Lg part
By: Lg
Part Number: AGM73610701
The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.
Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.
Symptoms of a bad Magnetic Door Plunger include:
- The washing machine door not staying closed during cycles.
- The machine failing to start due to a door sensor not detecting closure.
- Random pausing of the machine during operation if the door unlatches.
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken tab on old magnet holder Joel E. • Granite Falls , NC • December 27, 2016
This was a super-easy repair. You have to line up the spring so that it sits on the bumps inside the magnet holder and the door, then you have to line up the tabs on the magnet holder so they will slide into the slots on the door. Then you just push it in. Repair took less than a minute.
Read more
More
$17.75
- Compare At:
-
$21.12
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: 3949247V
The Washer Lid Switch is an OEM replacement part for Whirlpool washers. It is an electronic component located inside the washer lid that detects when the lid is open or closed in order to activate the necessary functions during the wash cycle.
Symptoms of a bad Washer Lid Switch include:
- The wash cycle will not start even when the lid is closed
- Error codes displayed related to the lid being open
- Inability to advance through cycle selections
- Flashes or other improper lid switch behavior
Causes of a bad lid switch can be normal wear and tear over time. Moisture exposure may also contribute to internal component failure.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not drain
-
Won't start
-
Will not fill with water
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Our washer wouldn't rinse spin or drain Jan C. • Somerville , MA • April 23, 2015
My son was doing his laundry, only to announce that the washer wouldn't rinse, spin or drain. I looked on line at new washers and was staggered to see how much they cost, our Whirlpool is 20 years old! Then I looked on Craig's list to see about getting a used washer, but when I found something that looked good, and looked up how it performed, most of them had terrible reviews. So, I looked at a video that told about the 5 most common things to go wrong and figured out it was a broken lid...
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Lg part
By: Lg
Part Number: 3550EL1005C
Note: Does not include moisture sensor bars. For the moisture sensor bars, order 2 of part# 6500EL3001A.
The Guide Cover is an OEM part for LG dryers. The part allows dust and debris to exit the dryer drum while preventing small clothing items from slipping through.
Causes of a bad Guide Cover can include accumulation of lint and debris that can restrict airflow, physical damage from handling or excessive use, and general wear that can compromise the fit and effectiveness of the cover.
Symptoms of a bad Guide Cover include:
- Increased drying times due to poor airflow.
- Unusual noises from lint hitting the fan or other components.
- Overheating of the dryer.
- Visible damage or misalignment of the cover that affects performance.
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Sheets broke cover guide with filter and sensor Stefan H. • Ponte Vedra Beach , FL • March 15, 2019
I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here.
Dryer is fixed, I'm happy.
Read more
More
$20.62
- Compare At:
-
$24.54
- You Save:
-
$3.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449259
The Rear Oven Door Glass is an OEM part for Whirlpool ovens. This glass panel is installed on the inside of the oven door and is essential for providing a heat-resistant viewing window, allowing users to monitor the cooking process without opening the door. Measuring about 20 inches by 10 inches, this quality glass keeps heat in the oven and provides a clear view for easy baking.
Symptoms of a bad Rear Oven Door Glass include:
- Cracks or chips in the glass,
- Visible streaks or fogging between glass layers that can't be cleaned,
- A loose fit that may cause heat to escape or the glass to rattle during oven use.
Causes of rear oven door glass damage typically include thermal stress from high heat, impact from closing the door too forcefully, or accidental bumps with pots or pans.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
I broke the oven door glass after running the cleaning cycle and wiping it with a damp cloth Carla P. • Keller , TX • March 14, 2015
Ordered the replacement glass through AppliancePartsPros.com and it arrived the next day. Wow! There are three pieces of glass (four if you include the front glass panel on the oven door when it is closed) layered inside and in looking at the diagram I ordered #7 and #24 replacement parts. I figured while I was in there the oven glass looked stained and maybe I would want new glass. With that said when the glass arrived and my husband and I got the oven door off and apart, we realized I...
Read more
More
$95.95
- Compare At:
-
$115.14
- You Save:
-
$19.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10111905
The Door Catch is an OEM part for Whirlpool dryers designed to securely hold the dryer door closed during use. This catch is the female piece on the door. For the strike on the front panel that inserts into the catch order W10295405.
Symptoms of a bad Dryer Door Catch include:
- The dryer door not staying shut
- Difficulty in closing the door
- The dryer failing to start due
Causes of failure can include normal wear and tear from the constant use of the dryer, damage from an external force, or misalignment from the door being improperly closed or hit. Over time, these factors can lead to the weakening or breaking of the door catch.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Start button was broke off in the gray part of the control board on our whirlpool cabrio dryer Curtis S. • Gregory , SD • January 06, 2015
There is a video on youtube that talks about how to disassemble the electronic component out of the control board so I really won't go into that part of it. This disassembly of the control board will need to take place before you can even get started taking the gray piece out of the console to replace it. Be careful not break off the little tips behind the control knob, don't force it, it does come apart easily and there is an easy way to do it, that is also on youtube.
This is where the...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WD21X25468
The Pressure Sensor Assembly is an OEM part for GE dishwashers. It monitors the water level within the dishwasher, ensuring the correct amount of water is used during each wash cycle for optimal cleaning performance.
Causes of a bad pressure sensor assembly can include wear and tear over time, clogs or debris obstructing the sensor, electrical issues, or damage to the sensor housing. Malfunctioning sensors can result from exposure to hard water minerals or detergent residues that affect the sensor's accuracy.
Symptoms of a bad pressure sensor assembly include:
- Dishwasher not filling with water properly
- Overfilling or underfilling with water
- Error codes related to water levels
- Dishes not being cleaned effectively
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
H2o error code Joe D. • Lockport , NY • August 07, 2025
Tried to fix with a non GE part, didn’t work. Your GE brand pressure sensor worked like a charm
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Ge part
By: Ge
Part Number: WB24T10029
The Range Surface Burner Control Switch is an OEM part for GE ranges. This switch manages the temperature of the surface burners on your range, providing the ability to adjust the heat level. Whether you're simmering sauces or boiling water, the control switch ensures precise temperature management, enhancing your cooking experience.
The causes of a faulty burner control switch often include prolonged use leading to wear on the electrical contacts, exposure to moisture causing short circuits, or physical damage from impact or excessive force when turning the knob.
Symptoms of a bad surface burner control switch:
- The burner not turning on or off
- Inability to adjust the heat level, with the burner staying at one temperature regardless of the knob setting.
- Intermittent burner function
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Large dual burner Frederick E. • Athens , AL • September 19, 2014
Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails.
My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because...
Read more
More
$37.26
- Compare At:
-
$45.52
- You Save:
-
$8.26
Genuine Frigidaire part
By: Frigidaire
Part Number: 131763256
The Front Loading Washer Door Lock and Switch Assembly is an OEM part for Frigidaire washing machines. This component ensures that the washer door is securely locked during operation, preventing leaks and interruptions, and also communicates with the control board to allow the wash cycle to start.
Causes of a bad door lock and switch assembly can include wear and tear from regular use, damage from forced door opening, electrical failures within the locking mechanism, or issues with the switch contacts.
Symptoms of a bad door lock and switch assembly include:
- The washer door not locking or unlocking properly
- Error codes related to the door lock
- The washer not starting its cycle
- Interruptions in the wash cycle due to door lock failures
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My washer would not complete the spin cycle and wring the water out of the clothes Lisa C. • Spring Lake , NC • March 12, 2014
I ran a diagnostics check on the washing machine and came up with the error code E47 -Board thinks the door PTC circuit is open in spin. The washer thought the door was open and would not finish the spin. I was left with a washer full of very wet clothes. This repair was SO extremely easy. I only needed to uses a pair of needle nose pliers and a screw driver. It took less than 10 minutes, start to finish. Now the new door lock assembly registers correctly and my clothes are completely...
Read more
More
$113.95
- Compare At:
-
$136.74
- You Save:
-
$22.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505088
The Washing Machine Door Latch is an OEM part for Frigidaire washing machines. This part ensures the door of the washing machine closes securely and remains locked during operation, providing safety and preventing water from leaking out.
Causes of a bad door latch can include physical damage, such as cracks or breakage, which can occur from the door being slammed or closed too forcefully.
Symptoms of a bad Washing Machine Door Latch & Receiver include:
- The door not closing or locking properly
- The washing machine not starting due to the door not being recognized as closed
- Water leaking from around the door
- An error message or indicator light signaling a door latch issue
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Washing machine door latch & receiver snapped off inside of door lock assembly Paul B. • Dunlap , IL • November 19, 2021
Unscrewed door latch and replaced it with the new door latch (1-2 min). Unscrewed outer plate from door lock assembly. Removed door lock assembly from its outer plate and unplugged wiring. Replaced with new door lock assembly, plugged back in, tightened some screws, double-checked alignment between latch & lock assembly was good and the project was done. Incredibly easy and saved about $150 not having a repair tech come out to fix it.
Read more
More
$35.74
- Compare At:
-
$42.89
- You Save:
-
$7.15