Power Strike Small Engine Fuel Line Parts

The Thermal Limiter is an OEM part for Frigidaire dryers. It acts as a safety feature, designed to prevent the dryer from overheating by shutting down the appliance when the internal temperature exceeds safe limits. 

Symptoms of a failing Thermal Limiter include:

• The dryer failing to start or stopping abruptly during a cycle
• No heat being generated while the dryer is running
• The dryer overheating or feeling excessively hot

Common causes for a bad thermal limiter include restricted airflow due to a clogged lint filter or venting system, component failure from age or faulty manufacturing, and unusually high operating temperatures from overloading the dryer or mechanical failures elsewhere in the system. When a thermal limiter trips or fails, it must be replaced to restore functionality to the dryer.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Latch is an OEM part for Whirlpool dishwashers. It is essential for securing the dishwasher door during operation, ensuring that the door stays closed and the dishwasher can run its cycles effectively. The latch mechanism also engages the door switch, which signals the dishwasher to start its cycle.

Over time, latches can wear out or become damaged due to repeated use, exposure to moisture, or accidental force. A malfunctioning latch can prevent the dishwasher from starting or lead to leaks during operation.

Symptoms of a bad Latch include:

• Dishwasher door not staying closed
• Dishwasher not starting
• Leaks around the door during a wash cycle
• The door latch feeling loose or not engaging properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: This lock has a White bezel. For the Grey bezel, order W10861642.

The Hi-Limit Thermostat is an OEM replacement part for Whirlpool gas dryers. As a safety device, it monitors internal drum temperatures during cycles to prevent overheating.  If the temperature rises to 200 degrees Fahrenheit, the heating element will cut off. It will resume operation once the temperature drops to 170 degrees Fahrenheit. Featuring two (2) male 1/4" terminals, this thermostat is designed for flush mount installation. Its electric dryer hi-limit thermostat is rated at L200-30F

Causes of a bad hi-limit thermostat can include exposure to excessive temperatures over an extended period. Failure to safely vent moist air outside may cause thermal expansion cutting off electrical control.

Symptoms of a bad hi-limit thermostat include:

• Inability to complete dryer cycles or premature shutoffs  
• Flashing error codes or indicators related to heat
• Sudden lack of heat even when dryer functions normally
• Tripping of household circuit breakers during drying

This OEM part is also compatible with brands like Maytag, Amana, and Kenmore models. Replace yours to ensure thermal safety.

The Washer Door Lock Switch Assembly ensures your Samsung washer operates safely and efficiently. This genuine OEM part is designed to securely lock the washer door during cycles, preventing accidental openings and enhancing safety. Crafted with durable materials, the switch assembly provides reliable performance and long-lasting use. Its easy installation process allows you to replace a faulty door lock quickly, restoring your washerGÇÖs functionality without the need for professional assistance. The Washer Door Lock Switch Assembly is compatible with a wide range of Samsung washer models, ensuring a perfect fit and seamless integration. By choosing this genuine OEM part, you maintain the integrity and performance of your appliance, avoiding potential issues caused by inferior replacements. This essential component helps your washer run smoothly, giving you peace of mind and prolonging the life of your machine. Upgrade your washer with the Washer Door Lock Switch Assembly for dependable operation and enhanced safety.

The Dryer Thermostat is an OEM part for Whirlpool dryers. It regulates the temperature inside the dryer, ensuring that it maintains the correct heat levels for safe and efficient drying cycles.

You should replace this dryer thermostat if it becomes faulty. Common causes of a bad dryer thermostat include electrical failures, buildup of lint or debris causing overheating, and general wear and tear over time.

Symptoms of a bad dryer thermostat include:

• Dryer overheating or not heating at all
• Extended drying times
• Dryer shutting off prematurely
• Error codes related to temperature control

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Whirlpool Lid Strike is an OEM replacement part for Whirlpool top-load washing machines. Located at the top of the washer, the strike assembly securely holds the outer lid assembly in place. 

Causes of a bad strike assembly washer can include cracks or breaks from stresses and vibrations over time, worn-out fasteners loose from use, or damage from forced lid closures.

Symptoms of a bad strike assembly washer include:

• Loose, wobbly lids allowing items to fall inside during loading  
• Inability to tightly secure lids with fasteners becoming stripped
• Clunking or banging noises coming from the lid area during cycles  
• Scratches or marks on surrounding surfaces from misalignment 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore top-load washer models. 

The Lid Lock Strike is an OEM part for Whirlpool washing machines. It is designed to interact with the lid lock mechanism, ensuring that the washing machine lid is securely locked during operation. This safety feature prevents the lid from being opened while the machine is running, which is essential for avoiding spills and ensuring the safety of users.

Symptoms of a failing Lid Lock Strike include:

• The washing machine lid failing to lock properly
• The washer not starting cycles or pausing mid-cycle due to a sensed open lid
• Error messages or indicator lights signaling locking issues
• Audible clicks without the lid locking

Causes of a bad lid lock strike often involve physical damage from frequent use, misalignment, or wear and tear that prevents the strike from properly engaging with the lock mechanism.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Thermal Cut Off is an OEM part for Whirlpool dryers. This safety device helps prevent the dryer from overheating by cutting off the power to the heating element if it detects excessively high temperatures. Ensuring proper functioning of the thermal cut off is crucial for the safety and efficiency of the dryer.

Causes of a bad thermal cut off can include regular wear and tear, exposure to high temperatures over extended periods, or electrical issues within the dryer.

Symptoms of a bad thermal cut off include:

• The dryer not heating up
• The dryer shutting off mid-cycle
• The dryer not starting at all
• Unusual overheating during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Handle is an OEM replacement part for freestanding dishwashers. Ergonomically designed for comfort and grip, it allows convenient opening and closing of the dishwasher door. 

Causes of a bad door handle can include wear and tear from thousands of uses over a decade, exposing the handle's plastic material to damage from hot humidity escaping during cycles. 

Symptoms of a bad door handle include:

• Loose or awkward fit that makes operation difficult  
• Cracking or breaking of outer plastic casing
• Distortion preventing proper secure latching
• Misalignment causing shutting/opening issues

This genuine Bosch replacement handle is also compatible with Thermador, Gaggenau, and select Kenmore models.

The High Limit Thermostat is an OEM part for LG dryers, designed to act as a critical safety feature within the appliance. This thermostat monitors the dryer's internal temperature, shutting off the heat source if it detects temperatures that are dangerously high. By doing so, it prevents overheating, which can lead to appliance damage or, in worst-case scenarios, fires. The high limit thermostat is a crucial component for the safe operation of your dryer, ensuring it operates within the specified temperature range.

Causes of a faulty High Limit Thermostat can include a malfunction within the thermostat itself, such as a failure to accurately detect temperature changes, or issues with the dryer that cause it to run hotter than designed, such as restricted airflow or a malfunctioning heating element.

Symptoms of a malfunctioning High Limit Thermostat include:

• The dryer not heating properly or at all
• The dryer repeatedly shutting off during cycles
• Excessive heat emanating from the dryer, indicating it is not regulating temperature correctly

This OEM LG part is also compatible with some Kenmore models.

The Hi Limit Thermostat Assembly is an OEM part for LG dryers. This thermostat monitors and regulates the temperature within the dryer to prevent overheating, ensuring safe and efficient operation. It acts as a safety device that shuts off the heating element if the dryer exceeds a certain temperature, protecting the appliance and your home from potential fire hazards.

Over time, the hi limit thermostat can fail due to wear and tear, electrical issues, or repeated exposure to high temperatures. If the thermostat becomes faulty, it can lead to improper temperature regulation within the dryer.

Symptoms of a bad hi limit thermostat include:

• The dryer overheating
• The dryer not heating at all
• The dryer shutting off mid-cycle
• Extended drying times due to inconsistent heating

This OEM LG part is also compatible with Sears/Kenmore models.

The Door Latch Assembly is an OEM part for Whirlpool dishwashers. It ensures a secure latch and seal for the dishwasher door during operation.

Causes of a bad dishwasher door latch assembly can include worn-out or broken latch components, damaged or malfunctioning door switches, or misalignment of the latch mechanism.

Symptoms of a bad Dishwasher Door Latch Assembly include:

• Difficulty in closing or latching the dishwasher door
• The dishwasher not starting or running when the door is closed
• Leaks or water spills around the door area
• Inconsistent or intermittent operation of the dishwasher

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Door Latch Lid Lock is an OEM part for GE washing machines. It is designed to securely lock the washing machine's lid or door during operation, ensuring safety and preventing water from spilling during the wash cycle.

Causes of a bad door latch lid lock include mechanical failure, electrical faults within the lock mechanism, or physical damage from slamming the lid or door.

Symptoms of a bad Door Latch Lid Lock include:

• The washing machine does not start or complete a cycle
• Error codes related to the door or lid lock appear on the display
• The lid or door does not lock properly or at all
• Unusual noises coming from the lock mechanism during operation

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Inlet Thermal Fuse is an OEM part for Frigidaire laundry centers. It serves as a safety device to prevent the washer from overheating by cutting off electrical power if the temperature exceeds safe levels.

Causes of a bad inlet thermal fuse can include electrical issues such as short circuits, prolonged exposure to high temperatures, or wear and tear from regular use.

Symptoms of a bad inlet thermal fuse include:

• The washer not starting or stopping mid-cycle
• No power to the washer, even when plugged in
• Error codes indicating thermal issues
• The washer overheating during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Catch is an OEM part for Frigidaire dryers. It secures the door closed during cycles. This allows the machine to safely run without the risk of the door opening, which could pause the drying process or pose a safety hazard. Constructed from durable materials, this door catch is designed to endure the frequent opening and closing of the dryer door, offering reliability and longevity.

Causes of a bad door catch include mechanical wear from regular use, accidental damage, or misalignment of the door.

Symptoms of a bad Door Catch include:

• The dryer door won't stay shut during cycles
• Difficulty closing the dryer door securely
• The need to apply extra force to close the door
• The dryer stops running due to the door opening mid-cycle

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Lock is an OEM part for Frigidaire front-loading clothes washers. It secures the washer door safely shut during cycles to prevent accidental opening.

Causes of a bad door lock can include normal wear of moving components, broken or cracked locking arms from repeated use or forced openings, or failure of electronic components controlling the lock function.

Symptoms of a failed door lock include:

• Inability to latch or remain securely closed during operation
• An unlocked door that could open unpredictably during cycles
• Fault codes displayed related to door issues
• Lock not releasing at the appropriate time

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.