Tray Steam Sensor Dry Model Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11050897
The High Limit Thermostat Kit is an OEM replacement part for Whirlpool dryers. This kit includes a thermostat that is designed to prevent the dryer from overheating by monitoring the temperature inside the dryer drum. If the temperature exceeds a safe level, the high limit thermostat cuts off power to the heating element, ensuring the appliance operates within safe parameters and protecting it from potential damage.
Over time, the high limit thermostat can wear out or fail due to repeated cycling and exposure to high temperatures. Electrical surges, buildup of lint and debris, or faulty wiring can also cause the thermostat to malfunction, potentially leading to overheating or inadequate drying performance.
Symptoms of a bad high limit thermostat include:
- The dryer not heating or only producing intermittent heat
- The dryer shutting off unexpectedly during a cycle
- Clothes taking longer than usual to dry
- The dryer running excessively hot or not hot enough
- Error codes related to temperature issues appearing on the display panel
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer flame would go out after a few minutes Robert B. • Eben Junction , MI • June 05, 2015
Purchased, Igniter Kit, Gas Valve Coil Kit, and as a precaution Thermal Fuse and Cutoff-Tml. Was pretty confident the problem was the gas valve coil, but figured that why not just replace the other items while I had the unit apart. Researching and utilizing this site certainly helped me out in figuring what the problem may be. Watched the instruction videos which were very detailed and helpful. The replacement and repair was not that difficult and the work was done rather quickly. Doing...
Read more
More
$15.66
- Compare At:
-
$18.79
- You Save:
-
$3.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387503
The Defrost Bimetal is an OEM part for Whirlpool refrigerators. It acts as a safety thermostat that monitors and controls the temperature during the defrost cycle. This component ensures that the defrost heater turns off when the evaporator coil reaches a specific temperature, preventing overheating and potential damage.
Causes of failure may include a malfunction due to wear and tear over time, electrical failure, or damage from moisture and ice.
Symptoms of a bad Defrost Bimetal include:
- The refrigerator is constantly running without cycling off
- Frost buildup on the evaporator coils, leading to reduced cooling efficiency
- The refrigerator or freezer compartment is too warm
- Unusual fluctuations in refrigerator temperature
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Frost buildup
-
Freezer too cold
-
Freezer not defrosting
-
Fridge too cold
See more...
Do-It-Yourself Stories from Customers like You
Frost buildup. Food not completely frozen. Running continuously and refrigerator too warm Robert K. • Louisville , KY • February 07, 2021
By reading stories of other customers who had bought this part, the first thing I looked for when troubleshooting my near-18 year old Frigidaire was for the top to be erupted or raised up on the bimetal defrost. It was truly a case of “look for the simple explanation first.” Once I determined that the bimetal defrost appeared to be the culprit, I ordered the part from Appliance Parts Pros. The back panel (evaporator cover) on my freezer was totally encrusted with ice. So I'm waiting for this to...
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Ge part
By: Ge
Part Number: WE4M398
The Inlet Control Thermistor is an OEM part for GE dryers. It monitors and regulates the temperature of the incoming air to ensure optimal drying performance. This thermistor sends temperature readings to the dryer's control board, which adjusts the heating element accordingly to maintain the desired temperature throughout the drying cycle.
You should replace this inlet control thermistor if it becomes faulty or fails to provide accurate temperature readings. Common causes of a bad thermistor include electrical failures, damage from overheating, or wear and tear from regular use.
Symptoms of a bad inlet control thermistor include:
- Dryer not heating properly
- Overheating or uneven drying
- Dryer shutting off prematurely
- Error codes related to temperature issues
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
The ge dryer would stop while in the process of drying Efren P. • Miami , FL • November 18, 2014
Replaced the inlet control thermis (thermostat) . Now it completes the cycle but clothes are not 100 % dry. I would add 15 minutes more and that helps.
FYI: you don't need to remove the drum, just remove the top cover and that will give you enough space to replace the sensor
Thank you Appliance Parts for your fast speed of delivery.
Read more
More
$36.46
- Compare At:
-
$43.39
- You Save:
-
$6.93
Genuine Lg part
By: Lg
Part Number: 6930W1A003X
The Magnetron Thermostat is an OEM part for LG microwaves and built-in ranges. Its primary function is to monitor the temperature and ensure that it remains within a safe operating range. If the temperature exceeds the preset limit, the thermostat will interrupt the power supply to the magnetron, preventing overheating and potential damage.
Causes of a faulty magnetron thermostat can include electrical malfunctions, component failures, or physical damage. These factors can result in issues such as erratic heating, microwave not heating properly, or the appliance shutting off unexpectedly.
Symptoms of a bad magnetron thermostat may include:
- Microwave not heating food evenly or at all
- Inconsistent or weak heating performance
- Microwave shutting off or displaying error codes related to temperature issues
This OEM LG part can also be used on Kenmore/Sears appliances.
This part fixes the following symptoms
-
Won't start
-
No heat
-
not self-cleaning
See more...
Do-It-Yourself Stories from Customers like You
High temperature thermostat went bad after running self clean function John V. • Longmont , CO • September 09, 2014
Did some Google searches and most comments concerning this issue on LG stoves indicated the high temperature thermostat malfunctions when using the self cleaning function. This malfunction causes complete loss of power for the entire stove and locks the oven door. Since I wasn't completely sure if it was the thermostat or where it was for that matter, I called a service tech to troubleshoot the stove. He was able to determine it was the thermostat and further tested his findings by...
Read more
More
$19.45
- Compare At:
-
$23.15
- You Save:
-
$3.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627985
The Icemaker Cycling Thermostat is an OEM part for Whirlpool refrigerators. This thermostat plays a crucial role in the icemaker's operation by monitoring the temperature in the icemaker and ensuring it is at the appropriate level for proper ice production. It reads the temperature to determine when the icemaker should cycle on and off.
Causes of a bad icemaker cycling thermostat can include electrical malfunctions, temperature sensor issues, or wear and tear.
Symptoms of a bad icemaker cycling thermostat may include:
- Inconsistent ice production.
- The icemaker not cycling properly.
- The icemaker not dumping the ice into the ice bin.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!!
The do it yourself video was extremely helpful and made the repair very easy.
Thanks so much for the great service and quick delivery !!!
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Lg part
By: Lg
Part Number: 6931EL3001E
The Thermostat Assembly is an OEM part for LG dryers. It functions as a crucial safety feature by monitoring and regulating the temperature within the dryer. This assembly ensures that the dryer operates within a safe temperature range, preventing overheating that can lead to appliance damage or fire hazards.
Symptoms of a failing thermostat assembly include:
- Clothes not drying properly or taking longer than usual to dry.
- The dryer repeatedly shutting off during a cycle.
- Excessive heat generation, making the surface of the dryer unusually hot.
The common causes of issues with the thermostat assembly include lint build-up that restricts airflow, a malfunction in the heating system that causes irregular temperature fluctuations, or simple wear and tear from regular use. A faulty thermostat can result in unregulated heat levels, so timely replacement is essential for safety and efficiency.
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
It wouldn't heat James C. • Mooresville , NC • June 29, 2019
After I cleaned out the typical 1.5 pounds of lint from the vent, ( I do it every 2 months), I went searching for a solution. I found 6 possible causes on this site and purchased everything except a new burner; I wasn't going to go that far. Let the fun begin. Since my vacuum was still nearby, I thought I was ready for anything. Wrong. After I watched all the videos again for reassurance, I went in with screwdriver in hand and laptop nearby. I removed the top and looked inside. Don't be fooled,...
Read more
More
$40.78
- Compare At:
-
$48.53
- You Save:
-
$7.75
Genuine Samsung part
By: Samsung
Part Number: DC61-02627A
The Dryer Moisture Sensor is a reliable component designed to ensure your dryer operates efficiently. This genuine OEM part accurately detects moisture levels in your laundry, allowing the dryer to adjust drying times automatically. By maintaining optimal moisture sensing, it helps prevent over-drying and energy waste, ultimately saving you time and reducing utility costs. Compatible with a wide range of Samsung dryer models, the Dryer Moisture Sensor guarantees a perfect fit and seamless integration into your appliance. Installing this sensor can restore your dryer's performance, ensuring your clothes are perfectly dried every cycle. Trust in this genuine OEM part to enhance the functionality and longevity of your Samsung dryer, providing you with dependable and efficient drying results.
This part fixes the following symptoms
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Ran for 5 to 7 seconds and stopped. Paul K. • Dayton , TX • November 04, 2017
I researched the issue on You tube and found out it could be either the "belt broke switch" or the Moisture sensor. A friend who was an appliance mechanic advised "since you have to take it all apart anyways, its best to replace the belt, spring, and Idler wheel" I bought the 5 item for $52. I watched the video on the AppliancePartsPros for changing out the belt and I replace all items on the list. Took 1 1/2 hrs and was fixed on restart!! * Wear gloves, the sheet metal is very sharp edges!*
Read more
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001655
The Oven Temperature Sensor is an OEM part for Whirlpool ovens. It measures the oven's internal temperature and sends this information to the control board to maintain the desired cooking temperature.
Causes of a bad temperature sensor can include exposure to high temperatures over long periods, electrical issues such as short circuits, or physical damage due to impact or mishandling.
Symptoms of a bad temperature sensor include:
- Inaccurate temperature readings
- Oven not heating to the set temperature
- Oven overheating
- Error codes displayed on the oven control panel
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: For the long 6-inch sensor order 12001656.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Won't start
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Oven did not keep correct or consistently correct temperature Keith J. • Antioch , IL • September 06, 2014
Online videos made this seem an easy fix. I unplugged the oven and removed the rear panel, then found where the temp sensor entered the oven. I unplugged the sensor's electric connector. Unlike the videos, this sensor screwed in from the inside of the oven, so I had to remove the 2 screws inside the oven which hold the sensor in place. Then I pulled the sensor out, careful not to tear the insulation with the wires and connector. Then I just pushed the new connector through the same hole and...
Read more
More
$33.95
- Compare At:
-
$40.40
- You Save:
-
$6.45
Genuine Ge part
By: Ge
Part Number: WB27X10928
The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.
Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.
Symptoms of a bad fuse include:
- The microwave suddenly stops working.
- No signs of power or response even when the microwave door is closed and the start button is pressed.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The GE Advantium Oven completely shut down. No lights, no sign of life at all. Denny E. • Waynesboro , VA • March 14, 2014
I read on line about other such ovens doing the same thing mine was doing, absolutely nothing!
I even read stories of a major retailer telling customers to throw the microwave away. There's nothing you can do to fix it. After replacing a simple fuse that I ordered from you, the Advantium is as good as new. It took a grand total of 5 minutes to make the repair. The shipping cost more than the part, but it was all very worthwhile.
Read more
More
$10.55
- Compare At:
-
$12.55
- You Save:
-
$2.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8318268
The Dryer Cycle Thermostat is an OEM part for Whirlpool dryers. It is responsible for regulating the temperature inside the dryer during the drying cycles. By monitoring the temperature, the thermostat ensures that the dryer maintains the appropriate heat levels for efficient and safe drying of clothes.
Over time, the cycle thermostat can become faulty due to regular wear and tear, electrical issues, or overheating. A malfunctioning thermostat can disrupt the drying process, leading to inconsistent temperatures or even safety hazards.
Symptoms of a bad dryer cycle thermostat include:
- The dryer not heating up properly
- Overheating or excessively hot dryer drum
- Clothes taking longer to dry or coming out damp
- The dryer shutting off prematurely or not turning on
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer would not heat Ken B. • Wayne , NJ • November 22, 2016
I looked at online repair videos on how to fix a Maytag dryer. When I knew what parts I needed, I could not find any local supply stores for the part. It was late Friday afternoon when I ordered my parts on AppliancePartsPros.com It stated Standard delivery was two business days. So I expected my parts to arrive on Tuesday. To my great surprise, the parts arrived on SATURDAY. Totally shocked, but extremely pleased.
Read more
More
$60.50
- Compare At:
-
$71.39
- You Save:
-
$10.89
Genuine Whirlpool part
By: Whirlpool
Part Number: LA-1053
The Dryer Thermostat Kit is an OEM part for Whirlpool dryers. This kit includes a high-limit thermostat and a thermal fuse, both of which are crucial for regulating the dryer’s temperature. The high-limit thermostat prevents the dryer from overheating, while the thermal fuse will cut off power if a critical temperature is exceeded, ensuring safety. The kit includes a high-limit thermostat (WP53-0771) and two thermal fuses (WP53-1096 & WP53-1182).
Symptoms of a bad Dryer Thermostat Kit include:
- The dryer not heating properly or at all, leading to clothes remaining damp after a cycle.
- Overheating of the dryer, which can be dangerous and cause additional component failure.
- The dryer stopping unexpectedly or not starting, indicating a blown thermal fuse.
Causes of issues with the thermostat or thermal fuse can include lint build-up that blocks proper airflow, faulty heating elements that cause temperature fluctuations, or general wear and tear that affects component integrity.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models,.
This part fixes the following symptoms
-
Too hot
-
Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You
Thermal fuse blew due to lint blockage Louis L. • Philadelphia , PA • March 21, 2017
I posted the following on the Facebook page ;
SOoooo my 10 year old clothes dryer stopped and like almost everyone else I just figured it's shot, burned up, gotta get a new one. Well, due to a few bumps in the road I cannot afford another problem. My 2 vehicles are not running and with one being in the shop for 3 weeks and not being able to afford a rental car anymore this dryer was another headache. It sat for weeks and laundry started piling up. While looking online for sales somehow I...
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Lg part
By: Lg
Part Number: 6500JB2001B
The Refrigerator Temperature Sensor is an OEM part for LG refrigerators. This sensor monitors the temperature inside the refrigerator and communicates with the control board to maintain the optimal cooling environment.
Common causes of failure include wear and tear over time, electrical issues, or exposure to moisture. A malfunctioning sensor can lead to inaccurate temperature readings, resulting in improper cooling or freezing.
Symptoms of a bad refrigerator temperature sensor include:
- Inconsistent refrigerator or freezer temperatures
- Food spoiling faster than usual
- Refrigerator running continuously or not running at all
- Error codes displayed on the control panel
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Fridge too cold
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
It did not stay cold refrigerator/freezer Richard L. • Shelton , CT • September 19, 2019
I replaced the evaporator sensor. Your company sent me the exact sensor I needed at a great price. No other company was able to help. No call was needed. Your website was great.
Read more
More
$42.37
- Compare At:
-
$50.84
- You Save:
-
$8.47
Genuine Frigidaire part
By: Frigidaire
Part Number: 134587700
The Control Thermistor is an OEM part for Frigidaire dryers. This component plays a critical role in regulating the temperature inside the dryer by monitoring the internal conditions and sending temperature data to the control board. The control board then uses this information to adjust the heat cycle, ensuring clothes dry evenly and safely.
Symptoms of a failing control thermistor include:
- Clothes not drying properly or cycles running too hot or too cold
- Frequent stopping or starting of the dryer
- Error messages related to temperature or sensor issues displayed on the control panel
Causes of control thermistor failure generally involve faulty wiring, accumulation of lint and debris affecting the sensor's accuracy, or wear and tear from regular use that leads to degradation of the sensor components.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Constant beeping dryer kept restarting Jimmy L. • Del City , OK • February 15, 2015
Replaced control board. Did not need Control Thermistor in my case, but I'm keeping it as backup. Got the Drum Belt just in case it breaks on me since the dryer is aging.
To replace control board:
Disconnect power and pull dryer away from wall.
Take 2 black screws on the back off to remove the top lid.
Remove 2 screws on top that hold the control interface on.
Remove 2 screws on the bottom backside of the control.
Pull out control panel and pull off terminal connections and push to remove...
Read more
More
$54.26
- Compare At:
-
$65.11
- You Save:
-
$10.85
Genuine Ge part
By: Ge
Part Number: WE4M137
The High Limit Thermostat is an OEM part for GE dryers. It serves as a crucial safety component, designed to prevent overheating by cutting off power to the dryer's heating elements when excessive temperatures are detected.
Symptoms of a faulty High Limit Thermostat include:
- Dryer not heating or running at all
- Dryer cycling on and off repeatedly during operation
- Error codes related to the thermal protection system
Causes of a bad High Limit Thermostat can include exposure to excessive heat over time, electrical issues, or physical damage to the thermostat itself.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Dryer would turnoff prematurely Ruben S. • Corpus Christi , TX • March 13, 2016
Changed out high limit thernasstat
Read more
More
$72.51
- Compare At:
-
$86.29
- You Save:
-
$13.78
Genuine Frigidaire part
By: Frigidaire
Part Number: 240597220
The Temperature Sensor (10K NTC) is an OEM replacement part for Frigidaire refrigerators. This sensor monitors the internal temperature of the refrigerator or freezer compartment, sending signals to the control board to regulate cooling cycles. It ensures the appliance maintains the correct temperature for optimal food preservation.
Temperature sensors can fail due to wear over time, electrical issues, or exposure to moisture. A malfunctioning sensor can cause inaccurate temperature readings, leading to improper cooling or freezing.
Symptoms of a bad temperature sensor include:
- Fluctuating or incorrect temperatures in the refrigerator or freezer
- Food spoiling faster than expected or freezing inappropriately
- Error codes related to temperature regulation
- The refrigerator running continuously or cycling too often
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
S or 5 e ce later that changes to s or 5 y ce Amritt V. • Yorkyown , VA • October 21, 2017
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest...
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10383615
The Thermistor is an OEM part for Whirlpool refrigerators. It functions as a temperature sensor that helps regulate and monitor the internal temperature of the refrigerator and freezer compartments.
Causes of a bad thermistor can include regular wear and tear, exposure to extreme temperatures, or electrical issues. A malfunctioning thermistor can lead to inaccurate temperature readings, which can affect the refrigerator's cooling performance and efficiency.
Symptoms of a bad thermistor include:
- The refrigerator not maintaining the correct temperature
- Inconsistent cooling, with some areas being too warm or too cold
- The refrigerator running continuously or cycling on and off too frequently
- Error codes related to temperature issues displayed on the control panel
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The freezer was working but the refrigerator compartment was way too warm. Martin T. • Brookfield , IL • July 26, 2020
I tried to buy a new refigerator, but strangely none of the major stores had anything I wanted in stock. The earliest delivery date for a new unit was over a month away.
At that I decided to try and keep this one running. I did online research into common refigerator problems.
I found the cooling coils in the freezer were covered in a block of ice and frost. The refigerator was not going through a defrost cycle. With a hair dryer I thawed out the coils. The refigerator worked fine for...
Read more
More
$45.95
- Compare At:
-
$54.22
- You Save:
-
$8.27