Ge Water Dispenser Control Lcd Parts

• Ice maker not making ice
• Ice maker won't dispense ice
• Leaking

Much easier than expected, I was certain it had to be a water line but the solved everything Read more

• Ice maker dispenses too little ice
• Not dispensing water
• Ice maker won't dispense ice
• Ice maker not making ice

By visiting your website, viewing the repair instructions and ordering the right parts. Very easy to understand and to do the repair.. Read more

Replaced control board myself. Easy. Read more

*NOTE: These comments regard my experience with GE model PSHS6PGZBESS. *Searched the web and reviewed several sites for water flow issue and diagnostic/repair and found Appliance Parts Pros. Watched their video for water-issue repair. The review validated the MWF Manifold repair part and its installation. In doing this research, I made a serendipitous discovery to repair the ice dispenser drip by replacing the Ice Door Assembly Flap part. Ordered both parts at standard shipping and... Read more

• Shuts off too soon

After taking the timer apart to see why it would not turn I found the timer motor was jammed. Taking the motor apart I found a broken gear. Looked up the model number of the dryer and found a new timer assembly thru appliancepartspros.com I ordered, a very easy process, received the part 2 days later. Installed the assembly in about 5minutes and had the dryer back up and running Read more

I have an 11 year old GE Monogram side by side built-in fridge that had been having cooling problems intermittently. The fridge would work for a day and then the compressor would not come on for 8 hours and temps would rise to the upper 20s in the freezer. Fans, lights, and everything else appeared to be functioning properly. It went like this for a few weeks and we put it off until the compressor decided not to come on at all for a full day. Being barely able to use a multi-meter, I watched a... Read more

• Timer will not advance

Replaced the timer unit and knob. Read more

Replaced the knob and timer. We didn't need the knob insert, because it was included with the knob which we didn't know this. Read more

• Fridge too cold
• Fridge runs too long

I went on you tube to try and figure out what might be causing this problem. It seemed that the problem was either the temperature thermostat or the defrost timer. I figured that seeing as I had never ever seen any frost in the freezer that the problem probably wasn't the defrost timer. So I ordered the temperature control thermostat, received it the very next day and in ten minutes removed the old one and installed the new one and we were good to go. It's been working just fine for the last... Read more

First I verified there was good water volume getting to the door, by uncoupling the hose at the door bottom (press in coupler ring) and activating the dispenser, there was not. (have a cup ready) Since the water filter is inline, and I had another I subbed it. Still no change. Here I made an error. I verified the water supply was fine, so jumped to the conclusion it had to be the solenoid operated valve, which it was not. I did not realize that the water filter bracket it attaches to has it's... Read more

My Advantium worked fine except the clock and cooking instructions were dim and bounced in a circular pattern over the left side of the display. I tried unplugging it and once or twice that seemed to help. When I finally decided to take the control panel off I had a difficult time until I saw an old remark from a 2009 forum discussion from a guy that said there were about a dozen screws to remove to get to the control panel. That meant the entire cover had to come off! Wow! Glad I didn't break... Read more

• Will not dispense detergent

Bought the replacement dispenser from APPros.com (of course). The video shows a front control panel, and our dishwasher has the 'hidden' control panel on the top of the door. So here's the difference: 1) You need to take out all the screws, except the two near the latch at the top. The other video shows only taking out the bottom six screws because the remainder of the screws hold the front control panel. I used a couple paint cans with rags on top to hold the corners of the door when... Read more

First I replaced the flickering digitron after reading elsewhere that it may be just a weak display. The new digit on was still flickering but a little differently. Our oven was still working with either display until suddenly it wasn't one morning. After finding AppliancePartsPros and reading that others had to go further by replacing the transformer and power boards, that's when I looked closer at those parts. There was some smoke evidence on the cover over the transformer and the back of... Read more

• Won't start

I am a 76 year old woman and hesitated to tackle the job. But my son sent me a Utube video "how to replace the board," and I was able to replace it, surprisingly, quite easily. I could have done it in a shorter period of time, if I had not been challenged with these arthritic hands and fingers. The refrigerator is now holding the temperatures quite nicely. Joan Read more

I first received the quality parts in less than 2 days. It took me 5 minutes to change out the timer and 2 of the minutes were finding where my fiancée put the Phillips head screwdriver. Unplug dryer first, remove top three screws from back panel. Pull old timer up and out, have new timer in hand and transfer one wire at a time. Once all wires are transferred, snap the new timer in its place. Replace your three screws, put knob on timer. Plug in dryer and test. Once completed, cleanup your... Read more

Ordered both parts and got them in 2 days, removed 3 screws on back panel of dryer and removed defective timer , installed wires on new timer and put back in place and installed new knob , very easy repair only took 10 minutes and dryer was back up and running Read more