Fdps35rbs0 Parts

The Dishwasher Tub Gasket is an OEM replacement part for Frigidaire dishwashers. It seals the gap between the dishwasher tub and the door, preventing water leaks and ensuring efficient operation. This tub gasket is typically made of durable rubber or silicone material, designed to withstand the heat, moisture, and chemicals involved in the dishwashing process

Symptoms of a faulty Dishwasher Tub Gasket include:

• Water leaks around the dishwasher door or base
• Failure to maintain proper water levels during cycles
• Condensation buildup or moisture issues outside the tub area
• Visible cracks, wear, or damage to the gasket material

Causes of a bad tub gasket can include normal wear and tear over time, exposure to excessive heat or chemicals, or physical damage from mishandling or improper door closure.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

The Bottom Gasket is an OEM replacement part for Frigidaire dishwashers. It is a critical component that seals the gap between the bottom of the dishwasher tub and the door, preventing water leaks and ensuring efficient operation.

Causes of a bad bottom gasket can include normal wear and tear over time, exposure to excessive heat or chemicals, or physical damage from mishandling or improper door closure.  

Symptoms of a faulty Bottom Gasket include:

• Water leaks around the base of the dishwasher
• Failure to maintain proper water levels during cycles
• Condensation buildup or moisture issues under the dishwasher
• Visible cracks, wear, or damage to the gasket material

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

The Lower Spray Arm is an OEM replacement part for Frigidaire dishwashers. It rotates within the lower dishrack, spraying water during cycles to thoroughly clean dishes. This arm measures approximately 16.00 x 3.10 x 3.10 Inches (L x W x H) NEED TO ORDER 5304518968 SUPPORT,SPRAY LOWER when ordering the lower spray arm

Causes of a bad lower spray arm include normal wear and tear over extended use. Clogs within the arm can also reduce water pressure.

Symptoms of issues with the lower spray arm are: 

• Inadequate cleaning performance, especially on lower rack dishes
• Reduced or uneven water coverage 
• Difficulty rotating or getting stuck

This OEM replacement part is compatible with Electrolux, Gibson, and Kenmore brand dishwashers too.

The Dishwasher Door Bottom Gasket is an OEM part for Frigidaire dishwashers. This gasket is installed along the bottom of the dishwasher door, ensuring a tight seal to prevent water from leaking out during operation.

Causes of a bad Dishwasher Door Bottom Gasket can include natural degradation over time, exposure to harsh cleaning chemicals that can erode the material, or improper installation leading to uneven wear or tearing.

Symptoms of a bad gasket include:

• Water leaking from the bottom of the door
• Visible wear or damage to the gasket
• Problems with the dishwasher cycle due to water escaping

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This support is a refrigerator mounting bracket that stabilizes internal components and keeps assemblies aligned for reliable operation. It replaces worn or broken supports to help reduce rattling and improper panel fit. What it does

• Secures and aligns internal cabinet or component panels to prevent shifting during normal use
• Helps maintain proper spacing for doors, panels, or internal assemblies
• Reduces vibration or rattling caused by loose or damaged supports
• Commonly replaced when a support is cracked, broken, or no longer holds mating parts securely

• High-level replacement: typically accessible from inside the cabinet or behind a trim panel; exact steps depend on model
• Use proper tools and retain all fasteners during removal for reinstallation
• Disconnect power before servicing any electrical components or removing panels near wiring

The Water Inlet Valve is an OEM replacement part for Frigidaire washing machines. It is a component responsible for controlling the flow of water into the washing machine tub during the wash and rinse cycles.

Symptoms of a faulty Water Inlet Valve include:

• No water or insufficient water entering the washing machine tub
• Washing machine not filling or taking an excessive amount of time to fill
• Leaks or water dripping from the inlet valve area
• Unusual noises or vibrations during the fill cycle

Causes of a bad water inlet valve can include normal wear and tear over time, sediment buildup or blockages, electrical malfunctions, or physical damage from water pressure issues or freezing conditions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.

The Upper Dishrack Assembly is an OEM component specifically designed for Frigidaire dishwashers. It plays a crucial role in supporting dishes during the washing process and allowing for efficient circulation of water underneath to thoroughly clean all surfaces. 

Causes of a bad dishrack can include warping or bending of the wires over time due to heavy loads, or damage from impact or mishandling that causes bent wires or broken support beams. 

Symptoms of a bad upper dishrack include:

• Dishes not drying completely
• Dishes shifting or sliding during the wash cycle 
• Standing water or poor water circulation underneath the rack
• Rust or corrosion building up on dish surfaces

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Dishwasher Rack Assembly is an OEM part for Frigidaire dishwashers. It provides an adjustable racking system inside the dishwasher tub to accommodate varying sizes of dishes, utensils, and cookware on multiple shelf levels. The rack assembly measures about 22"x 21"x 9" including the wheels.

Symptoms of a bad rack assembly include:

• Broken or missing rack wires that compromise integrity
• Shelves that will not stay locked into desired positions
• Rust or corrosion buildup weakening structural components
• An inability to fully extend or retract racks from the tub

Causes of a bad rack can include deterioration of rack materials from repeated wash cycles, broken mounting connectors, or damage from improper loading methods that put undue stress on the racks.

As an OEM replacement, this Frigidaire dishwasher rack restores safe and dependable use of the cleaning space. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It plays a critical role in the dishwasher's operation by removing the used water at the end of each wash cycle, ensuring the machine is ready for the next load. This assembly includes the pump that powers the expulsion of water, along with any necessary housing and fittings to connect it securely to the dishwasher's system.

Causes of a bad part can vary from clogs formed by food particles or other debris, to mechanical failure of the pump motor itself. 

Symptoms of a bad Drain Pump Assembly include:

• Water not draining properly from the dishwasher
• Unusual noises coming from the pump area
• The dishwasher fails to start a wash cycle due to the system detecting water from a previous cycle still inside.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Lower Rack Assembly is an OEM part for Frigidaire dishwashers. This rack is designed to hold dishes, cups, glasses and other utensils securely in place on the lower level during the washing cycle.

Causes of a bad lower rack can include warping or bending of wire prongs over time due to heavy loads, corrosion from constant moisture exposure, breakage of plastic parts, or shearing off of roller components. Heavy pots and pans can put significant strain on the rack.

Symptoms of a bad lower rack assembly include:

• Items falling through or between prongs during the cycle
• Rack unable to securely hold dishes in place
• Rack unable to smoothly roll into and out of the dishwasher
• Loud clanking or banging noises accompanied by excessive movement

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Heating Element is an OEM part for Frigidaire dishwashers. It heats water to the right temperature for washing dishes and aids in drying by promoting evaporation. Situated at the dishwasher's bottom, this element is vital for excellent cleaning and dry dishes.

Over time, the Heating Element may fail due to reasons like mineral buildup from hard water, corrosion, or electrical problems. A faulty heating element can cause issues, impacting the dishwasher's cleaning and drying performance.

Symptoms of a bad Heating Element include:

• Dishes not being cleaned properly due to the water not reaching the required temperature.
• The dishwasher not drying dishes at the end of the cycle.
• Visible signs of damage to the element
• The dishwasher taking longer than usual to complete a cycle.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This manifold assembly routes gas from the supply to a range's burners and ignition system to restore proper burner operation and predictable flame control. Replace a damaged manifold to address irregular or absent burner performance. What it does:

• Directs gas from the inlet to each burner and associated valves for correct fuel distribution.
• Restores normal burner ignition and flame size when a cracked or blocked manifold causes weak or uneven flames.
• Can resolve symptoms such as burners that won't light, burners that light intermittently, or uneven heating across burners.
• If you detect the smell of gas, stop use immediately — shut off the gas supply.

• Manifold assembly (1)

• Shut off gas supply and disconnect electrical power before servicing.
• This is a replacement assembly; the part number matches your appliance before ordering.
• Inspect all seals and fittings and test for leaks after installation (use approved leak-detection methods; do not test with an open flame).

Replace a damaged or wobbly top rack with this upper rack assembly to restore smooth glide and secure loading on the dishwasher's upper level, helping cups and bowls stay in place and wash correctly.

• Supports and organizes items on the dishwasher's upper level
• Allows the top rack to roll in and out smoothly along the rails
• Helps position items for proper spray coverage and drying
• Common symptoms: rack falls off tracks, binds or won't slide, broken/missing tines, cracked or rusted rack

• Disconnect power before servicing; turn off water if moving the appliance
• Open both upper rails and remove or release the end stops
• Slide the old rack out; transfer any rack-mounted accessories to the new rack if needed
• Insert the new rack into the rails, reinstall end stops, and check for smooth travel

The Lower Dishrack Wheel Assembly is an OEM part for Frigidaire dishwashers. This part allows the lower rack to slide in and out easily without causing damage to the dishwasher interior. This part ensures that the rack moves smoothly, providing ease of access to load and unload dishes.

Causes of a bad part can be varied, including normal wear and tear from regular use, overloading the rack with heavy dishes, which puts extra stress on the wheels, or accidental damage during loading or cleaning.

Symptoms of a bad Lower Dishrack Wheel Assembly include:

• The lower rack getting stuck or having difficulty moving in and out.
• Unusual noises coming from the rack as it moves.
• Visible damage or wear to the wheels.
• The rack frequently falling off its tracks due to instability.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Rack Assembly is an OEM part for Frigidaire dishwashers. It holds silverware securely in place during the cleaning and drying cycles. This basket measures approximately 16.88" X 8" and has two lids. Please Note: This assembly no longer comes as 3 separate pieces and is now 1 piece.

Causes of a bad basket assembly can include regular wear and tear, damage from overloading or mishandling, and degradation from prolonged exposure to water and detergents. Clips, holders, or the basket frame may break or wear out over time, affecting its functionality.

Symptoms of a failed rack assembly are:

• Silverware shifting positions or falling during cycles
• Difficulty loading or removing dishes
• Rust or flaking of the protective coating
• Noise or rattling from a loose or damaged rack

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This trap is a molded drain fitting used in select Frigidaire-built appliances. It helps keep water flowing in the correct direction while limiting backflow of air and debris, supporting proper drainage and reducing leaks or odors when the original fails. What it does

• Creates a water seal in the drain path to reduce backflow and odors
• Guides condensate or wash water toward the drain pan/outlet for proper removal
• Helps protect internal components by limiting debris entry into the drain path
• Common symptoms of a bad trap: slow or no draining, water pooling/leaks, unpleasant odors, or visible cracks/warping

• 1 trap

• Disconnect power and, if applicable, shut off the water supply before servicing
• Access the drain area per your model's service/owner documentation; place towels to catch residual water
• Note hose routing and trap orientation; transfer and securely reinstall any clamps or seals
• After reassembly, run a small amount of water through the system to check for leaks