Parts for Ge PTW605BSR1WS: Tub & Motor Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Secures and organizes wiring harness in top-load washers. Replace if broken, missing, or worn to keep wires properly routed and prevent chafing.

Washer not powering on or losing power intermittently? This main control wiring harness restores electrical connections between the control board and components.

Fix incorrect water levels or washer not filling properly. This pressure hose connects the water level switch to the tub for accurate fill sensing.

Fix intermittent electrical issues or loose connections in your washer. This wire harness connector restores secure plug connections between circuits.

Fixes washer agitator that's cracked, loose, or not moving clothes properly. This impeller base ensures thorough cleaning. DIY install in under 10 minutes.

Ice not dispensing or jamming? This auger rotates to push ice from the bin through the chute. Fixes cracked or worn auger paddles that cause jams.

Secures washer panels, brackets, and assemblies. Replace when missing, stripped, or worn to restore proper mounting and reduce vibration.

Covers the center bolt of your top-load washer agitator. Prevents debris and water from entering. Simple snap-on installation in under 5 minutes.

Washer bouncing or grinding? The hub connects the tub to the transmission. Moderate DIY repair requires removing the agitator and aligning spindle teeth.

Fix grinding noises during agitation with this washer hub nut washer. Secures the hub and keeps the drum aligned during wash and spin cycles.

Washer making grinding noise or agitator loose? This hub nut secures the tub to the drive system. Moderate DIY repair requires spanner wrench tool.

Shields the washer drive belt from damage and debris, preventing premature wear. Replace if cracked, broken, or belt shows unusual wear patterns.

This screw is a factory fastener used to secure appliance components. Replace a missing, stripped, or corroded screw to keep panels, brackets, and assemblies tight and help prevent vibration or rattling from loose hardware.

• Secures panels, brackets, and internal assemblies at their mounting points
• Replaces lost, rusted, or stripped hardware for a solid, reliable hold
• Helps reduce vibration, rattling, or shifting caused by loose fasteners
• 1/4-20 thread per OEM designation for proper fit where specified

• Disconnect power and, if applicable, shut off water supply before servicing
• Start threads by hand to avoid cross-threading, especially in plastic
• Tighten snugly; do not overtighten to prevent stripping or cracking
• Verify alignment and stability of the secured component after installation

Secures the platform bearing assembly to prevent drum wobble and noise. Replace when retainer is cracked, worn, or missing hardware. Confirm fit with your model.

Door spring for front-load washers. Assists with smooth opening and closing of the washer door. Replace if cracked, fractured, or broken from wear.

A small mounting support that provides a stable anchor point for screws used to secure panels or internal assemblies. Replacing a damaged screw platform restores proper fastener engagement and reduces panel movement and vibration. What it does:

• Anchors screws to hold trim, panels or internal components in place
• Restores secure attachment when the original mounting point is cracked or worn
• Helps eliminate rattling, loose panels, or alignment issues caused by a failed mounting surface
• Works with the appliance's existing screws and surrounding hardware to maintain structural fit

• Disconnect power to the appliance before attempting any repair
• Use the correct screws and a properly sized screwdriver to avoid further damage
• Inspect surrounding mounting points and replace any stripped screws or damaged clips as needed

If your washer won't spin or switch from wash to spin cycle, the shift actuator likely needs replacement. This repair requires tipping the washer.

Fix grinding or squeaking noises during spin cycles with this washer clutch. Engages transmission for proper spinning. Moderate DIY repair.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Replacement clutch spring for top-load washers. Connects clutch assembly to drive mechanism. Replace if worn, broken, or damaged during repair.

Fix washer vibration, banging, or off-balance shutdowns with this upper ball joint. Supports the suspension rod to keep the tub centered during spin.

Fix excessive washer vibration and banging with this suspension rod and spring assembly. Restores tub balance and absorbs movement during spin cycles.

Connects motor to drum for spin cycles. Replace if washer won't spin, makes noise, or drum doesn't rotate. Verify fit with your model number before ordering.

This pulley nut secures the washer's drive pulley to the shaft to keep the belt aligned and power transfer reliable. Replacing a worn or missing nut restores stable spin performance and helps prevent belt slippage and noise.

• Locks the drive pulley to the shaft for proper belt alignment and consistent power transfer
• A loose or stripped nut can cause pulley wobble, belt squeal, slippage, or the belt coming off
• Replace if the original nut is damaged, missing, or will not stay tight after adjustment

• Disconnect power and water supply; safely tip or elevate the washer for bottom access
• Remove the drive belt; hold the pulley while loosening the nut (verify thread direction—do not force)
• Hand-start the new nut to avoid cross-threading; tighten securely per service information and confirm pulley runs true
• Reinstall the belt, verify alignment, and rotate by hand before restoring power

Washer making loud noises or drum not spinning? A worn motor pulley assembly often causes these issues. This part secures the pulley to the motor shaft.

Transmission pulley and nut for top-load washers. Transfers motor power to the drum for spinning and agitation. Replace if cracked, worn, or damaged.

Fix a washer that won't agitate or spin with this drive motor. Powers the agitation and spin cycles in top-load washers. Moderate DIY repair.

Fixes washer that won't spin or shows error code 26. This speed sensor monitors drum rotation for proper spin cycles. DIY-friendly, 15-30 minute repair.

Fix washer leaking during drain cycle with this drain pump seal. Prevents water leaks between pump and tub. Easy DIY repair, takes about 30 minutes.

Washer won't drain or leaving standing water? This drain pump removes water at cycle end. DIY-friendly repair, typically 30 minutes with basic tools.

Internal drain hose channels water from washer tub to external drain system. Replace if cracked, kinked, or leaking to restore proper drainage function.

Self-tapping hex washer head screw for securing washer panels and brackets. Replace missing, stripped, or damaged mounting screws for secure assembly.

Fix leaks or loose connections in your washer with this clamp. Secures hoses, sensors, and wiring harnesses. Simple installation takes minutes.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.