Need Help?
Call or text
Show parts
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells. This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
This part is discontinued by the manufacturer and is no longer available for purchase.
Washer won't spin or clothes stay soaking wet? This inner drum tub assembly replaces the rotating basket that holds and tumbles laundry during wash cycles.
Usually ships within 4 - 14 days
Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.
Secures water supply hoses behind the control panel to prevent kinks and leaks. Replace if damaged, cracked, or after repeated vibration wear.
Fastens key washer components to maintain alignment during operation. Replace if stripped, rusted, or missing to restore stability and reduce vibration.
Secures washer drum during moving or transport. Immobilizes internal components to prevent damage. Replace if missing, lost, or needed for relocation.
Factory shipping bolt secures washer drum during transport. Replace if broken, missing, or worn after installation to prevent future transit damage or rattling.
This top plate is the replacement interior top panel that protects microwave components and helps direct heat away from the cavity. A firm, exact-fit replacement restores safe operation and prevents food debris from reaching internal parts. What it does:
Washer won't spin or makes grinding noises? The motor rotor bolt secures the rotor to the motor shaft. Requires a 17mm socket for installation.
Direct replacement outer cabinet panel for your washer. Restores finished appearance and protects internal components. Replace if cracked, dented, or missing. Verify fit with your model number before ordering.
Holder assembly for dryer door catch mechanism. Snaps into place to secure the magnetic door plunger. Replace if broken, cracked, or missing latches.
Secures washer tub during transport to protect suspension and internal components. Essential for moving your washer safely without damage to the drum system.
Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.
Hinge bracket for laundry center and washer units. Replaces broken, cracked, or worn brackets that support the door hinge assembly during operation.
Fix washer control issues with this multi-connector wire harness. Restores electrical connections between control board and components. Direct fit.
Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.
Fix washer electrical failures with this wire harness. Restores power and signal routing between control boards and components. Direct fit replacement.
Complete outer door assembly for washers. Restores proper sealing and appearance. Replace if door is cracked, damaged, or won't close securely. Confirm fit with your model number before ordering.
Replace your broken or cracked laundry center door handle. This exterior handle installs on the front panel for opening and closing the door.
Connector nozzle creates a secure seal between hoses or tubing in your washer. Replace when you notice leaks or loose connections. Confirm fit with your model.
Fix leaks or water flow issues during wash cycles with this internal inlet hose. Routes water from valve to fill system. Moderate DIY repair.
Fix no hot water, slow filling, or screaming noise during fill. This washer water inlet valve controls water flow into the tub. Moderate DIY repair.
Fix a washer that won't fill, fills slowly, or leaks at the water connection. This inlet valve controls water flow into the tub. Easy DIY repair.
Fix water leaking from vent pipe with this washer float assembly. Prevents overflow and controls suds. Moderate DIY repair with video guide available.
Washer won't spin or agitate? The stator assembly generates the electromagnetic field that powers drum rotation. Moderately difficult repair.
Mounts to the washer's lower frame to secure components and maintain alignment. Replace if bracket is cracked, broken, rusted, or missing hardware.
Replace your dryer's cracked, broken, or missing control knob assembly. Restores secure fit and clear detents for accurate cycle and temperature selection.
Leveling leg assembly for washers and laundry centers. Installs at the base to support and level the unit. Replace if cracked, broken, or missing.
Fix fabric softener leaking or not dispensing properly with this washer dispenser cap. Seals the softener compartment to prevent drips and residue.
Seals siphon/drain connection to prevent leaks and odors. Replace if worn, cracked, or leaking. Confirm fit with your washer model number.
Fix leaking from under the detergent dispenser with this washer dispenser box. Solves cracks or breaks that compromise the dispenser structure.
Washer case housing component. Replaces cracked, damaged, or missing case parts. Essential structural element for proper appliance assembly.
Fix detergent not dispensing or leaking during wash cycles. This washer dispenser assembly houses detergent and fabric softener compartments.
Replacement cover cap for washers. Conceals exposed screw heads and fastener holes for a clean finish. Install when original cap is cracked or missing.
Connects detergent dispenser to washer tub. Replace if cracked, leaking, or clogged with detergent buildup. Verify fit with your model number.
Replaces cracked or rotted washer vent hose that causes moisture buildup and leaks. Ensures proper air circulation to prevent mildew. Verify fit.
Replacement heater assembly for washers. Installs in the wash tub housing. Replace if cracked, leaking, or damaged. Includes integrated thermistor sensor.
Connects household water supply to your washer inlet valve. Replace this hose if it's cracked, leaking, or worn to restore safe water flow during cycles.
Directs water from inlet valve to detergent dispenser in LG washers. Replace if hose is cracked, leaking, won't stay attached, or damaged from wear.
Washer won't drain or complete cycles? This drain pump assembly removes water from the tub during drain and spin cycles. Restores proper draining function.
Fix LE error codes or grinding noises during spin with this washer rotor assembly. Pairs with stator to drive drum rotation. DIY repair in 30 minutes.
Washer won't fill properly or overfills? The pressure switch monitors water levels and signals when to stop filling. Moderately easy DIY repair.
Suspension spring supports and stabilizes the washer tub during wash and spin cycles. Replace if broken, snapped, or stretched to restore proper operation.
The Holder is an OEM part for LG front-loading washing machines. It is a plastic mounting bracket or suspension system that attaches to the rear of the washer tub and helps secure internal components like hoses, pulleys, and the rear bearing in place during spin cycles. Subject to force and vibration, the holder must withstand years of washing use.
Symptoms of a bad holder include:
Causes can be fatigue from repeated wash cycles, stress cracks from heavy loads, or material deterioration over time. Replace with this OEM LG holder to maintain drum balance and suspend components securely. It is also compatible with Sears/Kenmore front-load washers.
Appliance won't power on? This power cord assembly restores electrical connection when the cord is damaged or has poor contact. Direct plug-in repair.
Directs wastewater from your washer to the drain. Replace if cracked, split, clogged, or leaking. Includes hose clamp. Confirm fit with your model.
Replace a worn washer door hanger assembly pivot to restore proper door alignment and smooth operation. Ensures the seal closes correctly. Verify fit.
Fix inconsistent wash temperatures with this washer sensor assembly. Monitors and relays accurate temperature data to the control board for proper cycle operation.
Fix a washer that won't start, stops mid-cycle, or shows error codes with a new main control board. This board manages all washing functions and cycles.
Secures hose connections in your washer to prevent leaks. Replace if you notice water leaking or loose hose fittings. Verify fit with your model number.
Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.
Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.
Fix washer leaks with this hose clamp. Secures hoses to pumps and valves, preventing water leaks and disconnections during wash cycles. Simple repair.
Noise filter assembly minimizes vibrations and reduces operational noise in your washer. Replace if experiencing excessive noise or vibrations. Verify fit with your model number before ordering.
Front-load washer door boot seal prevents leaks between drum and cabinet. Replace if torn, cracked, or moldy to stop water damage. Confirm fit with model.
Fix water leaking from your washer dispenser or misdirected flow with this dispenser water guide channel. Routes water properly to prevent splashing.
Secures the door boot seal to prevent leaks during wash cycles. Replace if corroded, loose, or if water leaks from the door area. Confirm fit with model.
Forms a flexible seal between tub and door on front-load washers to contain water. Replace if torn, moldy, or leaking to restore seal and eliminate odors.
Secures rubber hoses to fittings with constant spring tension to prevent leaks. Replace when rusted or weakened to maintain a tight seal. Confirm fit.
Fix excessive vibration, banging during spin, or washer walking across floor. This damper assembly controls drum movement. Moderate DIY repair.
Hinge pin locks shock absorbers to the washer drum assembly. Replace if broken, worn, or when installing new shock absorbers. Installs at dampener mount.