Parts for Kenmore Elite 79573165611: Ice Maker / Ice Bin Parts

This is a replacement mounting bolt used to secure appliance components and assemblies, restoring proper fit and reducing movement that can cause noise or misalignment. Use when a factory fastener is missing or damaged. What it does

• Fastens panels or internal components to maintain correct alignment and structural integrity.
• Prevents vibration-related noise and rubbing by holding parts securely in place.
• Restores secure connections after disassembly for service or repair.
• Helps eliminate intermittent movement that can lead to wear or leaks when a fastener is compromised.

• Use the correct bolt length and thread engagement for the application; do not force a mismatched fastener.
• Tighten to snug, manufacturer-specified torque when available; avoid overtightening to prevent stripping.
• Inspect surrounding parts (washers, nuts, threaded holes) and replace if worn or damaged.
• Disconnect power and follow all safety precautions before servicing the appliance.

This screw is a direct-fit replacement fastener that secures panels, brackets, and internal components. Replacing a missing or stripped screw helps stop rattling and keeps parts aligned for reliable operation. What it does:

• Secures panels, trim, brackets, or internal components to restore proper fit
• Replaces missing or damaged hardware that can cause rattling or loose parts
• Restores alignment so doors, shelves, or assemblies operate smoothly
• Provides a straightforward hardware fix without replacing larger assemblies

• Use the matching screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until seated to avoid damaging threads or plastic parts
• Disconnect power or follow appliance safety instructions before servicing electrical areas
• Keep removed hardware organized and save any damaged parts for inspection

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

This is a replacement screw used to secure appliance panels, trim, and small components so damaged or missing fasteners don't leave parts loose. It restores proper fit and reduces rattling and movement. What it does:

• Secures panels, trim pieces, or internal components to restore proper fit
• Stops panels from shifting or vibrating during use
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Helps eliminate rattling noises caused by loose fasteners

• One replacement screw as pictured

• Unplug the appliance or shut off power before installing
• Use the correct screwdriver or bit to avoid stripping the head
• Hand-start the screw, then snug—do not overtighten to avoid cracking plastic parts
• If screw threads are damaged, replace with the exact OEM screw to ensure proper fit

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

The Leveling Leg is an OEM part for LG refrigerators. It is one of the four legs at the bottom corners that elevate and provide stability to the entire appliance.

Causes of failure can be broken mounting points that no longer provide secure elevation, full compression of the built-in cushioning, or damage from impact on an unlevel floor.

Symptoms of a faulty leveling leg include:

• Excessive shaking or vibrating of the refrigerator
• Door alignment issues where doors are difficult to open or close fully
• Visible leaning or misalignment of the refrigerator cabinet

This OEM LG part is also compatible with some Kenmore models.

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

This is a customized screw used to secure components in LG appliances. It replaces a worn or missing fastener to restore proper assembly and reduce rattling or loose panels. What it does:

• Secures panels, brackets, or small components in the appliance chassis
• Helps stop vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to restore safe, stable assembly
• Matches OEM fit for the specific mounting point it was made for

• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or parts
• Disconnect power and follow appliance-specific safety procedures before servicing

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

This replacement drawer tray assembly restores a damaged or cracked refrigerator drawer surface so stored items sit level and slide smoothly. It's a direct-fit tray used where the factory tray was broken, warped or stained. What it does

• Replaces a cracked, warped or discolored refrigerator drawer surface
• Provides a stable, level base for produce and other stored items
• Helps the drawer slide and seat correctly in the cabinet
• Restores original appearance and function without full cabinet replacement

• One drawer tray assembly

• Remove food and any loose shelving before starting; follow refrigerator power-off and safety recommendations
• Installation is typically a simple remove-and-replace of the broken tray—retain fasteners or clips and align the tray before seating
• Wear gloves to avoid cuts from sharp edges while handling broken plastic

This drawer tray assembly forms the shelf/frame that supports and guides a refrigerator drawer. Replacing a damaged tray restores smooth drawer operation and secure storage so bins slide correctly and items are held level.

• Provides the fixed frame the drawer rides on and supports the weight of stored items
• Keeps the drawer aligned on its tracks for easy opening and closing
• Maintains proper spacing and organization within the compartment
• Typical symptoms: cracked or broken frame/tabs, sagging drawer, binding, or falling off track

• Disconnect power and remove food from the affected area
• Slide the drawer(s) out and lift out the damaged tray
• Seat the new tray assembly fully on locator tabs/rails; avoid forcing cold, brittle plastic
• Reinstall the drawer(s) and verify smooth movement

This replacement drawer tray assembly restores a damaged or cracked refrigerator drawer surface so stored items sit level and slide smoothly. It's a direct-fit tray used where the factory tray was broken, warped or stained. What it does

• Replaces a cracked, warped or discolored refrigerator drawer surface
• Provides a stable, level base for produce and other stored items
• Helps the drawer slide and seat correctly in the cabinet
• Restores original appearance and function without full cabinet replacement

• One drawer tray assembly

• Remove food and any loose shelving before starting; follow refrigerator power-off and safety recommendations
• Installation is typically a simple remove-and-replace of the broken tray—retain fasteners or clips and align the tray before seating
• Wear gloves to avoid cuts from sharp edges while handling broken plastic

Replacement drawer tray assembly that restores the interior storage surface of a refrigerator drawer, keeping foods contained and organized. Fits in place of a damaged or missing tray to help return normal drawer seating and use. What it does:

• Provides a stable surface for refrigerated items and keeps loose items from falling into the compartment below
• Replaces cracked, warped or broken trays that cause uneven seating or poor containment
• Helps the drawer sit and slide correctly when the tray is seated properly
• Keeps spills and crumbs contained on a removable surface for easier cleaning

• Remove all food and pull the drawer out to access the tray; your user manual for proper drawer removal steps
• Align the new tray with the drawer guides and seat it fully until it snaps or rests in the correct position
• Handle edges carefully; wear gloves if the old tray is cracked or jagged

Replacement drawer tray assembly that restores the interior storage surface of a refrigerator drawer, keeping foods contained and organized. Fits in place of a damaged or missing tray to help return normal drawer seating and use. What it does:

• Provides a stable surface for refrigerated items and keeps loose items from falling into the compartment below
• Replaces cracked, warped or broken trays that cause uneven seating or poor containment
• Helps the drawer sit and slide correctly when the tray is seated properly
• Keeps spills and crumbs contained on a removable surface for easier cleaning

• Remove all food and pull the drawer out to access the tray; your user manual for proper drawer removal steps
• Align the new tray with the drawer guides and seat it fully until it snaps or rests in the correct position
• Handle edges carefully; wear gloves if the old tray is cracked or jagged

This drawer tray assembly forms the shelf/frame that supports and guides a refrigerator drawer. Replacing a damaged tray restores smooth drawer operation and secure storage so bins slide correctly and items are held level.

• Provides the fixed frame the drawer rides on and supports the weight of stored items
• Keeps the drawer aligned on its tracks for easy opening and closing
• Maintains proper spacing and organization within the compartment
• Typical symptoms: cracked or broken frame/tabs, sagging drawer, binding, or falling off track

• Disconnect power and remove food from the affected area
• Slide the drawer(s) out and lift out the damaged tray
• Seat the new tray assembly fully on locator tabs/rails; avoid forcing cold, brittle plastic
• Reinstall the drawer(s) and verify smooth movement

This shelf assembly replaces a damaged or missing refrigerator shelf to restore stable storage and even cooling. Tempered-glass/trim construction provides a durable, easy-to-clean surface for storing foods and containers. What it does

• Provides a flat, stable surface for storing items inside the refrigerator.
• Helps maintain airflow and consistent cooling by sealing shelf area as designed.
• Replaces cracked, chipped or warped shelves that can cause spills or unstable storage.
• Fits into existing shelf tracks or support clips for secure placement.

• One refrigerator shelf assembly (glass shelf with trim as shown)

• Lift out existing shelf by sliding to the removal position; reverse steps to install.
• Handle tempered glass carefully and wear gloves to avoid cuts.
• No tools typically required; if clips or brackets are damaged, replace those parts separately.

Restore safe, level storage with this refrigerator glass shelf. It replaces cracked or missing shelf glass so you can organize groceries securely and use the full width of the compartment without wobbling containers or makeshift fixes.

• Provides a flat, supportive surface for food storage inside the fresh food section
• Replaces broken, chipped, or shattered shelf glass to correct unsafe support
• Helps keep items level to reduce tipping and spills
• Restores the original shelf layout when a pane is missing

• Unplug the refrigerator and clear the shelf area before starting
• Wear cut-resistant gloves; handle glass with both hands
• Slide out the shelf assembly; remove the damaged pane and seat the new glass into the existing frame/trim as designed
• Ensure the glass is fully seated, reinstall the shelf, and verify stability before loading items

This shelf assembly is a replacement ventilated storage shelf that restores organized, visible storage inside the refrigerator. It keeps lightweight items secure while allowing air circulation for consistent cooling. What it does:

• Provides a stable, ventilated surface for storing bottles, produce, and other items
• Replaces torn, sagging or missing net-style shelves that let items fall through
• Helps keep contents organized and easy to see and reach
• Maintains airflow compared with solid shelving, supporting even cooling

• Disconnect power or unplug the appliance before servicing
• Remove food and any items from the area before installing
• Typically installs by snapping into existing shelf rails or bracket slots; use only manufacturer-recommended fasteners
• If clips or mounting hardware are damaged, replace them to ensure a secure fit

This rail guide assembly supports and guides a refrigerator drawer so it opens and closes smoothly and stays aligned. Replace a worn or broken rail to restore proper drawer movement and prevent sagging or sticking. What it does:

• Supports the drawer on its track and helps keep it level during operation
• Guides the drawer to glide smoothly and prevents binding or catching
• Replaces damaged or cracked rails that cause noisy, uneven, or misaligned drawers
• Helps maintain proper drawer seal and storage alignment

• Disconnect power to the appliance before beginning repairs
• Remove the drawer and any obstructing shelves to access the rail assembly
• Inspect mounting clips and screws; replace any damaged fasteners as needed
• Reinstall drawer and test movement; do not force parts into place

This rail guide assembly keeps a drawer or sliding component aligned and operating smoothly, restoring proper travel and reducing binding or noise. It replaces worn or damaged guides to help parts open and close reliably. What it does:

• Provides a stable track for drawer or panel travel to prevent sticking or misalignment
• Reduces grinding, scraping, or rattling caused by worn guide surfaces
• Keeps moving parts centered to support smooth, even sliding motion
• Restores correct clearance when original guide is cracked, broken, or bent

• Disconnect power and remove any product panels or drawers before starting
• Typical install requires basic hand tools; handle plastic parts gently to avoid breakage
• Verify proper orientation and engagement of guide with mating slide before reassembling

The Tray Assembly, Fresh Room is an OEM part for LG refrigerators. This tray assembly is designed to fit in the fresh room section of the refrigerator, providing a designated space for storing fresh produce and other perishable items.

Causes of a bad tray assembly can include overloading the tray, accidental impacts that cause cracks or breaks, and normal wear and tear from frequent use.

Symptoms of a bad tray assembly include:

• Cracks or breaks in the tray plastic
• The tray not fitting securely in its designated space
• Difficulty in sliding the tray in or out

This OEM LG part is also compatible with Sears/Kenmore models.

This holder assembly bracket secures and aligns a small appliance component so it stays in place during normal use, restoring reliable fit and reducing noise or movement caused by a loose part. What it does

• Provides a stable mounting point for the associated component to prevent shifting or detachment
• Restores correct alignment for doors, panels, or internal modules that rely on the bracket
• Helps stop rattling, vibration noise, or intermittent contact caused by a broken or bent bracket
• Supports safe operation by keeping parts properly positioned within the appliance

• Basic hand tools are usually all that's required; follow the appliance service manual for access steps
• Disconnect power (and water, if applicable) before starting any repairs to avoid shock or injury
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws or damaged clips for a secure fit

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place

The Tray Assembly,vegetable is an OEM part for LG refrigerators. This tray provides a dedicated storage area for perishables like fruits and vegetables in the fresh food compartment.  

Causes of a bad vegetable tray can include cracks or punctures developing over time from frequent loading/unloading of produce. This exposes produce directly to cooler air reducing shelf life.

Symptoms of a damaged tray include:

• Produce falling into other shelves and compartments
• Dividers separating or breaking off the main tray
• The tray no longer fitting properly in the dedicated shelf space

This OEM LG part is also compatible with some Kenmore models.

This Vegetable Tray Assembly is the refrigerator crisper drawer pan that provides a flat, secure surface for storing produce. Replacing a damaged tray restores proper containment and keeps fruits and vegetables organized and protected. What it does

• Replaces a cracked, chipped, warped, or otherwise damaged crisper tray that fails to hold produce securely
• Provides a stable surface to contain fruits and vegetables and prevent spills onto lower shelves
• Helps the drawer slide and align properly when the tray and pan are intact
• Reduces direct contact between produce and lower cabinet areas, making cleanup easier

• Empty the drawer and remove any shelves or supports before removing the old tray
• Lift the old tray straight out and slide the new tray into the same tracks or supports until it seats securely
• Handle carefully during installation to avoid damage; wear gloves if the part is glass or has sharp edges

This TV cover assembly replaces a damaged or worn outer cabinet to protect internal electronics and restore the set's appearance. It provides a secure mounting surface and helps prevent dust and debris from reaching internal components. What it does

• Replaces cracked, dented, or discolored outer housing that affects appearance or fit
• Covers and protects internal boards, wiring, and connectors from dust and impact
• Restores proper alignment for control buttons, input openings, and mounting points
• Helps stop rattles or loose components caused by a broken or warped cabinet

• Disconnect power and remove the TV from its stand or wall mount before starting
• Follow manufacturer disassembly steps; keep screws and small parts organized
• Handle the cover gently to avoid cracking plastic tabs or scratching the finish

The Temperature Sensor is an OEM part for LG refrigerators. It monitors the internal temperature and sends this information to the control board, ensuring that the refrigerator maintains the correct temperature for optimal food preservation.

Over time, temperature sensors can fail due to electrical issues, exposure to moisture, or wear and tear from continuous use. 

Symptoms of a bad temperature sensor include:

• Inaccurate temperature readings
• The refrigerator or freezer being too warm or too cold
• The refrigerator running constantly or not running at all
• Error codes displayed on the control panel

This OEM LG part is also compatible with Sears/Kenmore models.

This guide assembly helps support and direct a sliding component within the appliance, ensuring smooth, stable movement and proper alignment for reliable operation.

• Provides a track/guide path for a moving tray or drawer
• Helps prevent binding, wobbling, or misalignment
• Can address issues like sticking, uneven travel, or jamming
• Maintains correct positioning for consistent performance

• Disconnect power and, if applicable, shut off water before servicing
• Remove the affected drawer/tray to access the guide area
• Transfer any reusable hardware from the original part if required
• Test movement and alignment after installation before reloading contents

This is a refrigerator drawer guide assembly that supports and guides a crisper/vegetable bin so it slides smoothly in and out. Replacing a worn guide restores proper drawer alignment and easy operation.

• Provides the track surface for the vegetable/crisper drawer
• Helps correct sticking, binding, or a sagging/misaligned drawer
• Can reduce scraping noises and uneven drawer movement
• Restores smooth sliding action after wear or damage

• Unplug the refrigerator before service
• Remove the affected drawer and any shelf above it for access
• Retain and transfer any screws or clips from the original guide
• Test drawer movement and alignment before closing up

This rail guide assembly supports and guides a sliding refrigerator drawer, helping it open and close smoothly. Replace a cracked or worn guide to restore proper alignment and prevent binding or the drawer jumping off its track.

• Provides the track and support for pantry/crisper/freezer drawer movement
• Keeps the drawer aligned to reduce wobble and uneven travel
• Restores smooth open/close when the guide is cracked or worn
• Helps the drawer seat fully for a proper fit

• Unplug the refrigerator before servicing
• Remove the bin/drawer from the compartment to access the guide
• Save and reuse existing mounting hardware and spacers
• Install the new guide, align the drawer, and verify smooth travel

This rail guide assembly supports and aligns a refrigerator drawer so it slides smoothly along its track. Replacing a worn rail restores easy operation and helps prevent binding, sagging, or uneven travel when opening and closing.

• Supports and guides the drawer/bin along the cabinet track
• Helps the drawer open and close smoothly and stay level
• Maintains proper alignment so the drawer seats correctly
• Common symptoms: drawer hard to slide, tilts or binds, rough/noisy travel, visible cracks or damage on the rail

• Disconnect power and remove drawer contents for safety
• Pull out and lift the drawer/basket off the rails to access the mounting points
• Remove screws/clips, transfer any brackets or end caps from the old rail, and install the new assembly
• Re-engage the drawer on both rails and test for smooth operation before reloading

The Crisper Drawer Slide Rail is an OEM part for LG refrigerators. It is designed to support and guide the crisper drawer, allowing it to slide in and out smoothly for easy access to your fresh produce. The rail measures approximately 20 x 6 inches,

Over time, the slide rail can wear out or become damaged, affecting the operation of the crisper drawer. Common causes of a bad crisper drawer slide rail include repeated use, accidental impact, or the accumulation of debris and residue that can hinder movement.

Symptoms of a bad crisper drawer slide rail include:

• Difficulty sliding the crisper drawer in and out
• The drawer not staying securely in place
• Unusual noises when using the drawer
• The drawer becoming misaligned or falling out of the track

This OEM LG part is also compatible with Sears/Kenmore models.

This case assembly is the outer housing for the Magic Room compartment, restoring proper fit and protection for internal components. Replaces a cracked, warped or damaged compartment case to help maintain compartment integrity and appearance. What it does:

• Provides the structural housing for the Magic Room compartment and secures internal components
• Restores proper alignment and fit to prevent rubbing or interference with doors/drawers
• Helps maintain an even internal compartment environment by sealing the compartment area
• Addresses visible damage such as cracks, broken mounting tabs or deformation

• Refer to the refrigerator's service manual for disassembly/reassembly steps and proper fastener torque
• Disconnect power to the appliance before starting any repair to avoid electrical hazard
• Handle plastic components carefully to avoid further cracking; replace any broken mounting clips
• Replace damaged screws or brackets with OEM-specified hardware for a secure fit

This is a factory-style screw used to secure components and panels on compatible LG appliances. It restores proper fit and reduces movement where a missing or stripped screw causes parts to sit loose. What it does:

• Fastens panels, brackets, or trim to appliance chassis to restore secure attachment
• Stops rattling or vibration caused by loose or missing fasteners
• Helps maintain proper alignment of removable parts for safe operation
• Serves as a direct replacement when the original screw is lost or damaged

• Screw

• Use the matching screwdriver or driver bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent damage to threads or plastic parts
• Replace only with the specified OEM screw to ensure fit and function
• Disconnect power to the appliance before accessing internal components when applicable

This hinge bolt secures the hinge to the appliance cabinet or door, keeping alignment true and motion smooth. Replacing a stripped, missing, or corroded bolt helps restore proper door operation and reliable closing.

• Fastens the hinge to support and stabilize the door
• Helps maintain alignment for smooth opening and closing
• Replaces damaged, stripped, or missing hardware

• Disconnect power to the appliance; shut off water supply if applicable
• Support the door to prevent strain on remaining hardware; enlist a second person if needed
• Note the order/orientation of any shims or washers and transfer them during reassembly
• Start threads by hand to avoid cross-threading; tighten securely without overtightening

This replacement screw secures specified panels or components inside your appliance. Refreshing worn or missing hardware helps restore a tight fit, reduce rattling, and keep assemblies properly aligned for reliable performance.

• Provides secure fastening for brackets, panels, or internal assemblies
• Replaces stripped, rusted, or lost hardware
• Helps reduce vibration and rattling noises
• Symptoms include loose panels, shifting components, or a screw that won't tighten

• Disconnect power and allow any hot surfaces to cool before servicing
• Wear cut-resistant gloves and eye protection
• Match length and thread to the original; replace like-for-like
• Start threads by hand to avoid cross-threading; do not overtighten

The Freezer Door Gasket is an OEM replacement part for LG refrigerators. It is designed to create a tight seal around the freezer door, helping to maintain the internal temperature by preventing cold air from escaping and warm air from entering. This ensures the freezer operates efficiently and keeps food frozen at the proper temperature.

Over time, freezer door gaskets can wear out or become damaged due to repeated opening and closing, exposure to cold temperatures, or the buildup of dirt and debris. A faulty gasket can lead to temperature fluctuations and increased energy consumption.

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• The door not sealing properly
• Increased energy use
• Food not staying properly frozen

This OEM LG part is also compatible with Sears/Kenmore models.

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

Color: Stainless

This replacement home bar case is the molded compartment that fits into the refrigerator door to hold the home-bar area. It restores proper storage and support for bottles and accessories behind the home-bar door. What it does

• Serves as the molded housing/shelf for the refrigerator's home-bar compartment.
• Supports bottles and small items stored behind the home-bar door.
• Helps align and secure the home-bar door and internal components.
• Cracked or damaged cases can cause items to shift, rattle, or fall from the home-bar area.

• One home bar case

• Disconnect power to the appliance before beginning any repair.
• Remove the refrigerator door panel or inner liner as required to access the home-bar case; keep fasteners organized.
• Handle the plastic housing carefully to avoid further cracking; use correct OEM screws and clips for reassembly.
• Test the home-bar door operation and inspect for proper fit before returning the refrigerator to service.

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The Gasket Assembly Door is an OEM part for LG refrigerators. This gasket forms a seal around the refrigerator door, preventing warm air from entering and cool air from escaping, thus maintaining optimal temperature inside the refrigerator.

Causes of a bad gasket assembly can include wear and tear over time, damage from frequent opening and closing of the door, or degradation from exposure to various elements. A compromised gasket can lead to inefficiency in the refrigerator's cooling performance.

Symptoms of a bad gasket assembly include:

• Warm air entering the refrigerator
• Increased energy consumption
• Frost buildup inside the refrigerator
• The door not sealing properly or being difficult to close

This OEM LG part is also compatible with Sears/Kenmore models.

The French Door Mullion is an OEM part for LG refrigerators. It is a flap located between the two doors of a French door refrigerator, helping to seal the gap and maintain the internal temperature by preventing warm air from entering when the doors are closed. This component is crucial for energy efficiency and proper functioning of the refrigerator.

Over time, the mullion can wear out or become damaged due to frequent use, impact from door closures, or issues with the hinge mechanism. Causes of a bad French door mullion include wear and tear, physical damage, or a faulty hinge that causes misalignment.

Symptoms of a bad French door mullion include:

• The mullion not folding or unfolding correctly
• Visible cracks or damage to the mullion
• Warm air entering the refrigerator, affecting cooling
• Increased energy consumption

This OEM LG part is also compatible with Sears/Kenmore models.

This decorative cap is a small trim piece that restores the finished look of your refrigerator door or exterior trim where the original cap is cracked, missing, or worn. It helps hide exposed hardware and keeps the appliance looking complete. What it does:

• Covers exposed screws, fasteners, or trim edges to restore appearance
• Prevents dirt and debris from collecting in exposed openings
• Addresses cosmetic issues like cracks, chips or missing trim pieces
• Simple trim replacement to refresh the appliance finish

• One decorative cap

• Typically installs by snapping or sitting into the trim opening; handle gently to avoid breaking surrounding trim
• Keep small parts away from children and pets
• If working near electrical components or water lines, unplug the appliance or turn off water supply before starting

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

This door basket is the inner door panel that holds items and protects internal components, restoring proper loading and access. It replaces a cracked, dented, or broken basket to help secure contents and improve door closure. What it does:

• Provides a rigid storage surface on the appliance door and protects internal mechanisms.
• Stops items from falling out when the door opens; prevents rattling and extra movement.
• Restores proper alignment and secure closure when the original basket is damaged or cracked.
• Helps maintain a clean interior by covering internal cavities and trim.

• Disconnect power to the appliance before beginning any service.
• Remove any items from the door and support the door while detaching the old basket.
• Line up mounting tabs and fasteners; press or secure the basket until it snaps into place.
• Inspect seals and hinges after installation; test door operation before regular use.

This is a refrigerator door basket that mounts on the inner door liner to hold bottles, condiments, and other small items. Replacing a damaged bin restores secure storage and helps keep items organized and accessible.

• Provides on-door storage space for beverages and condiments
• Helps keep items from tipping or falling when the door opens
• Replace if cracked, broken, warped, or no longer stays seated in the door slots
• Common signs include the bin falling off, visible cracks, or reduced capacity

• Unplug the refrigerator for safety before replacing interior parts
• Lift the old bin up and out of the door liner slots
• Align and press the new bin straight into the slots until fully seated
• Do not overload; distribute weight evenly to prevent future damage

The Door Bin is an OEM component specifically designed for LG refrigerators. This storage compartment fits neatly inside the refrigerator door, providing convenient access for perishables or snack items. 

The door bin enables efficient organization of shelves and drawers by freeing up interior space for bulk storage. Its rotating tiers allow for adjustable arrangements to suit any storage needs.

Causes of a bad door bin can include broken or cracked plastic from overfilling or impact damage over time. 

Symptoms of a bad door bin include:

• Gaps that allow cold air to escape from the door 
• Detached or missing tiers that reduce storage functionality
• Damage or wear that renders the bin unusable

Replacing this OEM LG door bin restores full storage and organization capabilities within your refrigerator door. It also protects the door insert from further damage.

This refrigerator door bin mounts to the inside of the door to hold bottles, jars, and condiments. Replacing a cracked or missing bin restores secure storage and helps prevent items from tipping or falling when the door opens.

• Provides organized, convenient storage on the door for frequently used items
• Attaches securely to molded tabs/rails on the inner door panel
• Helps prevent tipping and spills as the door opens and closes
• Common symptoms: cracked bin, broken locking tabs, won't stay seated, falls off the door

• Unplug the refrigerator or switch off power at the breaker before starting
• Remove contents, then lift the old bin straight up to disengage from the door
• Align the new bin's hooks with the door slots/rails and press down until fully seated
• Verify a snug fit before reloading items

The Refrigerator Door Shelf is an OEM part for LG refrigerators. It provides additional storage space on the door of the refrigerator, allowing for the organization and easy access of frequently used items such as condiments, beverages, and small containers. It measures approximately 14" x 4" x 4".

Causes of a bad refrigerator door shelf can include general wear and tear from repeated use, overloading the shelf with heavy items, or accidental damage during cleaning or reorganization. Cracks or breakage in the plastic material can also render the shelf unusable.

Symptoms of a bad refrigerator door shelf include:

• Cracked or broken shelf
• Items not staying securely on the shelf
• The shelf not fitting properly into the door brackets
• Difficulty in attaching or removing the shelf

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This lower hinge assembly secures and supports the refrigerator/freezer door at its bottom pivot, restoring proper door alignment and smooth opening. Replaces a worn or damaged hinge to help reduce sagging, rubbing, or uneven sealing. What it does:

• Provides the pivot point and mounting for the bottom of the appliance door.
• Restores correct door alignment to improve door closure and sealing.
• Helps eliminate door sag, binding, or scraping during operation.
• Durable molded/metal construction built to match OEM fit and function.

• Disconnect power and empty/secure the door before starting; prop or support the door to prevent dropping.
• Keep fasteners and alignment shims used during removal for reference; transfer any hardware only if explicitly required.
• Use basic hand tools; follow the appliance service manual for torque and alignment instructions.

This bushing is a replacement shaft support that stabilizes a rotating assembly and helps reduce wear and noise. It restores smooth movement and helps maintain proper alignment for the appliance component. What it does

• Supports and centers a rotating shaft or drum to reduce wobble and rubbing
• Reduces noise and friction from worn pivot or support points
• Helps prevent uneven wear on mating parts and prolongs assembly life
• Commonly replaced when you hear squeaking, grinding, or notice excessive play

• One bushing

• Inspect mating surfaces and replace any damaged clips, seals, or fasteners as needed
• Use basic hand tools; hold the assembly steady and press the bushing squarely into place
• If the bushing is press-fit, use a suitable driver or press to avoid damage
• Disconnect power and follow all safety precautions before beginning repairs

This door stopper assembly mounts at the hinge to control how far the door opens and promote smooth, consistent closing. Replacing a worn or broken stopper restores proper door swing and helps protect the hinge from overextension.

• Limits the door's opening range to prevent overextension
• Guides and cushions door movement for a smoother close
• Helps maintain door alignment at the hinge area
• Common symptoms: door swings too far, doesn't stop at the usual angle, clicks/binds near the hinge, or visible cracks/wear on the stopper

• Disconnect power to the appliance before servicing
• Support the door and use a helper when loosening hinge hardware
• Note the original orientation and transfer any spacers/shims if present
• Tighten fasteners evenly and verify smooth door operation before finalizing reassembly

This door stopper mounts at the hinge to limit the refrigerator door's opening angle and provide a positive stop. Replacing a worn stopper helps protect the hinge, prevent over-swing, and promote a smooth, even door seal.

• Limits door opening at the hinge to prevent overextension
• Helps maintain door alignment and consistent gasket contact
• Reduces impact that can loosen hinges or damage the cabinet
• Common symptoms: door swings too far, clunks at full open, doesn't stop smoothly, or shows visible wear at the stop

• Disconnect power and remove items from the door to reduce weight
• Support the door; remove hinge cover and fasteners as needed to access the stopper
• Install the new stopper in the same orientation; tighten hardware securely
• Verify door swing and sealing after reassembly

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This refrigerator handle assembly replaces a broken, cracked or loose door handle so the refrigerator door opens and closes securely and comfortably. Durable replacement restores a clean finished look. What it does:

• Replaces damaged or worn refrigerator door handle to restore grip and operation
• Provides a solid mounting point so the door opens and closes without wobble
• Helps prevent further cabinet or door damage caused by a cracked or loose handle
• Matches OEM form for proper fit and appearance

• One refrigerator door handle assembly

• Disconnect power to the appliance before beginning any repair
• Remove door trim or fasteners as required to access mounting points; keep hardware for reassembly unless new hardware is supplied
• Use correct tools and avoid over-tightening fasteners to prevent cracking the handle

This refrigerator door handle assembly replaces a worn or broken door handle so you can open and close the fridge safely and easily. It restores a solid grip and original door appearance. What it does:

• Replaces a cracked, loose or missing refrigerator door handle
• Provides a secure gripping surface for opening and closing the door
• Restores proper handle alignment and helps prevent accidental slips
• Matches OEM fit and mounting points for straightforward replacement

• Disconnect power and empty or support the door before starting to avoid injury or damage
• Replacement typically requires basic hand tools; handle mounting fasteners may need removal
• Have a helper hold the door if needed; follow manufacturer's instructions for safe reassembly

This slide rail lets a drawer move smoothly in and out, restoring proper alignment and stable operation. Replace a worn or bent rail to stop sticking, uneven travel, or a drawer that comes off its track. What it does:

• Guides the drawer along its track for smooth opening and closing
• Restores even, stable travel and prevents the drawer from catching or binding
• Replaces bent, worn, or damaged rail components that cause misalignment
• Helps keep the drawer aligned to prevent tilting or partial ejection

• One slide rail

• Disconnect power and remove the drawer before replacing the rail when applicable
• Verify rail orientation and slide fully into the track before securing fasteners
• Use basic hand tools; keep removed screws and clips for reinstallation
• If the drawer is heavy, have a second person assist to prevent injury or damage

This guide assembly rail is the replacement drawer slide that restores smooth, stable movement for a refrigerator or appliance drawer. It keeps the drawer aligned and reduces sticking or uneven operation for everyday use. What it does:

• Guides and supports the drawer as it opens and closes to maintain proper alignment.
• Reduces sticking, scraping, and uneven travel caused by worn or damaged rails.
• Helps prevent drawer sagging and improves load stability when pulling out the drawer.
• Works with the factory mounting points and keeps the drawer tracking true.

• One guide assembly rail.

• Disconnect power or follow appliance-specific safety procedures before servicing.
• Remove the drawer or access panel to reach the existing rail; keep fasteners for reuse unless replacement required.
• Compare the new rail to the old part to ensure fit and orientation before installing.
• If fasteners are damaged or missing, replace with OEM-specified hardware.

This guide assembly keeps a sliding appliance drawer or rack aligned for smooth, reliable movement and helps prevent sagging or derailment. It restores proper tracking so the drawer/rack opens and closes without binding. What it does:

• Guides and supports a sliding drawer or rack so it stays aligned during use
• Reduces binding, sagging, or derailment when loading or pulling the drawer/rack
• Eliminates scraping or grinding noises caused by a worn guide
• Helps restore smooth, even motion and proper engagement with the slide mechanism

• One guide assembly

• Disconnect power before starting any repair
• Remove the affected drawer/rack to access the guide; keep track of fasteners
• Align the guide with the slide channel and secure per the OEM fastening points; some designs snap in while others use screws
• If mounting hardware is worn or missing, replace with OEM-specified fasteners for safe operation

This replacement hinge assembly supports and pivots the refrigerator door. Replacing a worn or bent hinge restores smooth door movement and proper alignment so the gasket can seal correctly to help maintain performance. What it does:

• Provides the pivot point for the door to open and close
• Supports the door's weight to keep it aligned
• Helps the door gasket seal evenly against the cabinet
• May correct issues such as door sagging, rubbing, popping, or not closing/sealing fully

• One hinge assembly

• Unplug the refrigerator and remove items from the affected door
• Support the door while removing hinge screws; note the orientation of any spacers/bushings
• Transfer any reusable hardware from the old hinge to the new assembly
• Reinstall and tighten fasteners; verify door is level and check gasket seal

Note: Left Rail Cap

Note: Right Rail Cap 

This ice maker drive gear engages the ice maker's motor to rotate the ejector and harvest ice, restoring proper ice release and ejection. Ideal for common ice-maker failures where the tray doesn't cycle. What it does:

• Transfers motor torque to the ice ejector, allowing the ice maker to harvest and eject cubes
• Commonly used when the ice maker stops cycling or fails to eject ice
• Can reduce grinding or clicking noises if the original gear is stripped or worn
• Works with the ice maker's harvest and fill sequence to maintain normal operation

• Power off and unplug the refrigerator before beginning service
• Remove the ice maker assembly per manufacturer instructions to access the gear
• Inspect mating gears and motor shaft for wear; replace any damaged parts to prevent repeat failure

This supporter hinge is the OEM-style hinge support that helps secure and align the appliance door, restoring stable door movement and proper sealing. Built to match the original hinge geometry for reliable fit. What it does:

• Supports the door at the hinge mounting point to keep door alignment stable
• Helps prevent sagging or uneven door gaps that can cause poor sealing
• Restores smooth opening and closing when worn or damaged hinge support is the cause
• Works as the hinge mounting support component shown in OEM parts diagrams

• One supporter hinge

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Follow the appliance's service manual for disassembly order and hinge removal/installation steps
• Use common hand tools (screwdriver, socket) and keep fasteners organized for reassembly
• Check adjacent hinge components and mounting hardware

This center hinge assembly secures and guides the refrigerator doors, restoring correct door alignment and smooth opening. Replaces worn or damaged center hinge hardware to help stop sagging and improve door sealing. What it does:

• Provides the central pivot point between the refrigerator doors for proper alignment and operation
• Restores smooth, even door movement when original hinge is worn or bent
• Helps the doors close fully to maintain the appliance seal and consistent internal temperature
• Fits the factory mounting points and matches OEM form for direct replacement

• Basic removal of trim and temporary support of the doors is required; have a helper to steady doors during replacement
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power only if removing electrical components nearby; this part replacement is typically mechanical
• Inspect surrounding hinge screws and door hardware and replace if worn for best results

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

This tension spring provides the restoring force for a moving component in select LG appliances, helping doors or internal mechanisms return to their resting position and maintain correct alignment. It's a small mechanical part that restores motion reliably when functioning. What it does

• Supplies tension to return or hold a moving part (door, hinge or internal linkage) in its intended position
• Restores smooth, consistent motion and helps prevent slamming or sagging caused by worn springs
• Common symptom: door or component does not return, feels loose, or has uneven movement
• Works as a direct-fit service part when the original spring has stretched, broken, or lost tension

• One spring (quantity: 1)

• Inspect the matching mounting points and hardware before installing; replace any damaged clips or pins
• Use care when removing/installing under tension; wear eye protection and follow safe-handling practices
• Only install the part in appliances that list the same part number/location; do not force mismatched parts

This upper hinge assembly replaces the top door pivot on compatible refrigerators to restore proper door alignment and smooth opening. It helps keep the door level and seals evenly to prevent cold air loss and improve operation. What it does:

• Provides the pivot point that supports the top of the refrigerator/freezer door
• Restores proper door alignment when the door is sagging, rubbing, or not closing completely
• Reduces uneven gaps that can cause cold air leakage and frost buildup
• Works with the existing lower hinge and door components to re-establish smooth opening and closing

• One upper hinge assembly

• Disconnect power to the appliance before starting and remove food from the door area as needed
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use the correct hand tools and follow torque recommendations from the manufacturer; avoid overtightening

This hinge secures and guides a refrigerator door for reliable opening and closing. It restores proper door alignment to help maintain an airtight seal and prevent sagging or rubbing. What it does:

• Supports the refrigerator door and attaches it to the cabinet frame
• Guides smooth door movement and maintains alignment
• Helps prevent door sag, uneven gaps, and items catching when opening/closing
• Reduces rubbing, scraping or abnormal door noise caused by a worn hinge

• Disconnect power and remove food from the door before starting; support the door to prevent dropping
• Use the factory mounting screws and follow OEM torque and alignment steps
• Check door position and seal after installation; adjust hinge mounting if necessary

This upper hinge assembly supports the refrigerator door at the top, providing a smooth pivot and proper alignment. Replacing a worn hinge restores even gaps and a tight seal to help maintain consistent cooling performance.

• Supports the door's weight and provides the top pivot point
• Maintains alignment for correct gasket compression and a tight seal
• Helps the door open and close smoothly without rubbing or binding
• Common signs of wear: door sagging or misalignment, rubbing/clicking noises, and poor sealing or condensation around the gasket

• Unplug the refrigerator before servicing.
• Remove the top hinge cover; retain screws and any shims for reuse.
• Support the door with a helper while removing and installing the hinge.
• Position the new hinge, align the door, then tighten screws and verify smooth swing and full gasket contact all around.

This replacement lever spring restores tension to a lever-style mechanism so the lever returns and operates reliably. Use it when a worn spring causes the lever to stick, slip, or fail to engage properly. What it does

• Replaces the worn or weakened spring in a lever assembly to restore proper return tension
• Helps prevent the lever from sticking, slipping, or failing to stay engaged
• Restores consistent mechanical movement for reliable operation
• Reduces intermittent or flaky lever behavior caused by a damaged spring

• Disconnect power to the appliance before starting any repair
• Inspect the lever assembly and mounting points; replace only the spring explicitly listed
• Use appropriate hand tools and pliers; avoid overstretching the spring during installation

This lever spring is a small replacement tension spring that restores proper return and engagement for a lever assembly. It helps maintain reliable lever movement and secure latching where a worn or broken spring causes play or non-return. What it does:

• Provides return tension for a lever or latch assembly so the lever snaps back into place
• Helps maintain proper engagement of latch/actuator mechanisms
• Common remedy for a loose, sagging, or non-returning lever
• Works as a direct-fit replacement when the original lever spring is damaged or fatigued

• One replacement lever spring

• Disconnect power and/or unplug the appliance before starting any disassembly
• Handle small springs carefully; keep track of orientation and any retaining clips during removal
• Installation may require partial disassembly of the trim or latch assembly

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This replacement spring restores proper tension to a microwave oven door hinge so the door opens and closes smoothly and holds position. It's a direct-fit part that helps eliminate sagging or uneven door movement. What it does

• Replaces a worn or broken hinge spring to restore proper door tension and alignment
• Helps prevent door from dropping open or not staying closed securely
• Supports smooth, controlled door opening and closing motions
• Addresses symptoms such as a sagging door, uneven closing, or loose-feeling hinge

• One replacement hinge spring (quantity: 1)

• Disconnect power to the appliance before attempting any service to avoid electrical shock
• Access may require removing the outer door panel or control panel; follow OEM disassembly instructions
• Handle the spring carefully—springs can be under tension and may release suddenly

This funnel directs dispensed water or ice from the appliance's dispenser into your cup or container to reduce spills and ensure proper flow. It replaces a worn, cracked, or misaligned chute to restore clean dispensing. What it does:

• Guides water or ice from the dispenser to the user's cup or container
• Prevents drips and reduces splashing at the dispenser opening
• Helps position dispensed items so they clear the dispenser housing
• Addresses symptoms like leaking at the dispenser, uneven flow, or pieces falling inside the dispenser well

• One replacement funnel shown

• Disconnect power and water supply before starting any work
• Remove dispenser or front panel per your model's service instructions to access the funnel
• Align the funnel carefully with the mounting tabs and snap or fasten into place without forcing
• If clips or seals are damaged, replace them to ensure a secure, leak-free fit

The Door Handle Holder Assembly is an OEM replacement part for LG refrigerators. It contains the internal brackets and mounting hardware required to securely attach the refrigerator door handles.

Causes of a faulty door handle holder assembly include wear from years of use, broken or stripped screws, or cracks in the plastic from heavy pulling or slamming.

Symptoms of a problematic door handle holder assembly are:

• Loose, wobbly or disconnected door handles  
• Difficulty opening the refrigerator door 
• Handles that do not stay flush or feel secure

This OEM LG replacement is compatible with select Kenmore side-by-side refrigerator models as well.

This button assembly replaces a damaged or worn control-panel button cluster to restore reliable button response and user control. It fits into the appliance's console and provides the tactile interface needed to select cycles and settings. What it does

• Replaces the control-panel button cluster so unresponsive, stuck, or missing buttons can be fixed.
• Restores tactile feedback and reliable electrical contact for user inputs.
• Helps resolve intermittent or non-working button inputs when the switch/buttons are the cause.
• Matches the OEM form to fit into the factory console opening.

• Disconnect power (and water, if applicable) before starting any repair.
• Access typically requires removing the console or control panel.
• Handle the assembly and ribbon/contact connectors carefully to avoid damage.

This cover panel replaces a damaged or missing exterior trim piece to restore the appliance's appearance and protect internal components from dust and debris. It fits where the original cover was mounted and keeps wiring and parts shielded. What it does

• Covers and protects internal components from dirt and accidental contact
• Restores the appliance's exterior finish for a clean, finished look
• Helps reduce rattles by securing loose openings or edges
• Matches the original mounting locations for proper fit and alignment

• Disconnect power (unplug appliance or switch off breaker) before starting work.
• Removal/install typically requires basic tools (screwdriver or nut driver); keep original fasteners unless replacements are provided.
• Handle with care to avoid scratching the finish or breaking mounting tabs; avoid forcing clips.

This replacement hinge cover is a molded trim piece that snaps over the refrigerator door hinge to restore the appearance and protect the hinge area from dirt and damage. It keeps the hinge assembly concealed and the door looking finished. What it does:

• Covers and protects the door hinge assembly from dust, grease and accidental contact
• Restores a clean, finished look when original hinge cover is cracked, broken or missing
• Helps prevent debris buildup that can interfere with hinge movement
• Matches original mounting style for a secure snap-on fit when intact

• High-level replacement: typically snaps into place; inspect clips/tabs and align before pressing fully
• Power/disconnect: no electrical disconnect usually required, but follow appliance safety guidance and keep doors supported
• Handle gently to avoid breaking plastic clips during installation

This communication link module provides the refrigerator's control board with network and user-interface connectivity so features and diagnostics can be accessed and controlled. It helps restore lost app or panel communication. What it does:

• Handles communication between the refrigerator's control system and external interfaces (user panel, network app).
• Works with the main control electronics to transmit status and diagnostic information.
• Replaces a damaged or non-communicating module that prevents remote control or smart features.

• One link (communication) module.

• Disconnect power to the appliance before replacing this electronic module to avoid shock or damage.
• Handle the module by its edges and avoid touching circuit contacts.
• Installation typically involves removing an access panel and unplugging/reconnecting a wiring harness; keep track of screw and connector locations.

This damper assembly controls airflow between refrigerator compartments to help maintain set temperatures and even cooling. Replaces a failed or stuck damper to restore proper air distribution and temperature balance. What it does:

• Regulates airflow between compartments so cold air moves where needed
• Can stop stuck-open or stuck-closed airflow that causes uneven temperatures
• Often linked to symptoms like warm spots, inconsistent cooling, or temperature swings
• Help reduce excess frost or humidity issues caused by improper airflow

• Disconnect power to the appliance before starting any repair
• Access usually requires removing interior liners, shelves, or panels; follow the service manual
• Handle actuator and wiring carefully; avoid pinching wires when reinstalling

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

The Compressor is an OEM part for LG refrigerators. As the primary component that circulates refrigerant to chill the refrigerator and freezer compartments, it is crucial for proper cooling operation. The compressor works with the condenser fan and evaporator coil to regulate temperatures inside the refrigerator. 

Causes of a faulty compressor can include gradual breakdown of motor windings, loss of refrigerant pressure over time, or failure of electrical components vital to operation.

Symptoms of a bad compressor are:  

• Elevated fridge/freezer temperatures unable to be maintained
• Frost patterns indicating poor or insufficient cooling 
• Abnormal vibrations or sounds upon compressor cycling
• Error codes displayed regarding cooling performance

It is also compatible with Sears/Kenmore refrigerator models.  
 

This evaporator assembly circulates refrigerant inside the freezer compartment to absorb heat and enable your refrigerator's cooling cycle. Replacing a damaged or corroded evaporator helps restore proper cold production and reduce ice buildup. What it does:

• Absorbs heat from the freezer compartment so the system can maintain low temperatures
• Enables proper refrigerant flow through the cooling circuit
• Common symptom indicators: persistent warm temperatures, excessive frost or ice buildup, or frequent compressor runtime
• Works with the appliance's defrost cycle to prevent long-term frost accumulation

• Disconnect power to the appliance before starting any repair
• Replacing this part may require removing panels, evacuating/recharging refrigerant, or accessing sealed refrigeration lines; have a certified HVAC/appliance technician handle refrigerant work
• Use proper tools and follow the manufacturer's service manual for torque and fastening details

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

This compressor damper is a vibration-isolating mount that sits between the sealed-system compressor and the chassis. It cushions the compressor to reduce noise, limit vibration transfer, and help keep refrigerant lines from being stressed.

• Isolates the compressor from the frame to absorb start/stop shock and vibration
• Helps reduce humming, rattling, or buzzing from the back/bottom of the appliance
• Replaces a damper that's cracked, flattened, hardened, or missing
• Can help if the compressor rocks or the unit vibrates excessively

• Disconnect power and pull the unit forward for access; remove rear/service panel if present
• Support the compressor to relieve load on the mounts before removing fasteners
• Match orientation; transfer any sleeves/spacers from the old damper to the new one
• Ensure the compressor sits level and that tubing is not strained before restoring power

This drip tray catches and channels water runoff inside the appliance to help prevent pooling and minor leaks. It's a direct-fit replacement listed by the manufacturer and sold as the single tray used in the unit. What it does

• Collects condensate or defrost water and directs it to the drain area to prevent pooling.
• Helps stop water from dripping onto lower drawers, shelves or the floor.
• Commonly replaces a cracked, warped or missing tray that causes visible leaks or water buildup.
• Fits into the appliance's lower compartment where the original tray sat.

• Unplug the appliance or disconnect power before servicing.
• Remove any obstructing drawers or shelves to access the tray location; handle glass shelves carefully.
• Lift out the old tray and set the new tray into the same position; no special tools typically required.

The Fan Guide Assembly is an OEM component specifically designed for LG refrigerators equipped with rear evaporator fans. This assembly guides proper airflow within the refrigerator compartment.

Symptoms of a bad fan guide assembly include:

• Development of warm or cool spots inside fridge surfaces  
• Excessive frost or moisture buildup at specific locations
• Reduced temperature fluctuation stability 
• Abnormally loud fan operation sounds

Causes of failure can be damage allowing fan blade strikes, cracks reducing structural integrity over time, or accumulation of dust clogging air passages.  

Replace yours today with this genuine OEM LG assembly to maintain optimized cooling throughout storage areas. Smooth, balanced airflow preserves food freshness evenly. This replacement part is compatible with Frigidaire, GE, and Samsung models for factory fit and function. Proper air distribution helps maintain energy efficiency.

Replacement fan guide that directs airflow from the refrigerator fan to improve cooling distribution and help keep the fan blade clear of nearby components. Restores proper airflow and can reduce rubbing or scraping noises. What it does:

• Channels airflow from the fan to promote even temperatures throughout the compartment.
• Keeps the fan blade aligned and away from cabinet walls and other components.
• Commonly replaced when cracked, warped, or broken parts cause rubbing or unusual fan noise.
• Helps maintain efficient cooling by restoring the intended airflow path.

• Disconnect power (unplug or shut off breaker) before servicing the appliance.
• Access typically requires removing the interior cover or rear evaporator cover.
• Handle the plastic guide carefully to avoid cracking; align mounting tabs and secure using the original fasteners.
• Inspect the fan blade and motor for damage while replacing the guide; replace any damaged components to avoid repeat issues.

This cover assembly protects the machine components and helps keep internal machinery free of debris and accessible for repair. It provides a durable barrier that helps extend component life and maintains safe operation. What it does:

• Shields motors, belts and internal linkages from dust and lint that can cause wear
• Helps contain moving parts to reduce pinch or contact hazards during normal use
• Maintains proper component alignment by providing a stable mounting surface
• Commonly replaced when cracked, warped, missing fasteners, or damaged from impact

• One cover assembly as shown

• Disconnect power before attempting service
• Handle gently to avoid cracking plastic tabs; inspect mounting clips and screws for damage
• Reuse original fasteners only if undamaged; replace any stripped screws or broken clips

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement