Lawn Mower Carburetor

The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.

This is a replacement carburetor used with a wide variety of lawn and garden equipment. It includes the full assembly for the carburetor and is responsible for mixing air and fuel together before both are transferred to the engine's combustion chamber. If the carburetor is damaged, the engine may not start as expected, even when the fuel tank is full. Carburetors can also become clogged by dirt or other debris.If the engine is not starting as expected and there is plenty of fuel in the tank, the best thing to do is test the carburetor for problems. This involves adding around a teaspoon of fuel to the carburetor itself after removing the air filter. If the carburetor is the problem, the engine should start but will quickly shut off. A socket set, pliers, and a screwdriver will be needed to replace the part.This carburetor is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual product. The carburetor is designed to fit generators and wood chippers created by Briggs & Stratton, Craftsman, Simplicity, and Tecumseh.

This genuine OEM primer bulb and valve repair kit is an identical replacement for certain models of lawn mower engines. The primer bulb is pressed prior to cold starting the engine, usually three times, which sends fuel into the carburetor. This helps the carburetor start more effectively and ensures smoother operation. The primer bulb assembly is exposed to the elements and it is a part that sees a lot of repetitive motion. As a result, it can wear out, become brittle and crack, or experience other failures. In some instances, the primer bulb and valve may be lost in the process of other repairs. Replacing it with a genuine part like this will provide an exact fit. This OEM primer bulb and valve repair kit is manufactured by Tecumseh and is compatible with several of its engines, as well as some engines found in Toro lawn mowers. There are about 20 machines that take this part, which is a complete kit for the primer and valve. The replacement kit includes the primer bulb, seal, plastic valve, and metal spring. It is important to allow the engine to cool completely before replacing this or any other parts. Wear gloves for hand protection.

This is a governor link designed to be used on small engine lawn and garden equipment. The link makes adjustments to the throttle on the machine to keep it running at a consistent and appropriate speed. If the tool is running too fast or too slow, the governor link will likely need to be set or adjusted. The governor link can become damaged or break through use and will need to be replaced. Inspect the springs and governor link to ensure they are fully operational. The link and springs should not be stretched out or damaged.This governor link is made to be used with wood chippers, tillers, and snowblowers created by Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and MasterCut. It is sold as an individual component. The part is a genuine OEM replacement component sourced directly from the manufacturer.

This is a genuine replacement diaphragm kit for select Briggs & Stratton engines. With regular use, the diaphragms and gaskets can wear down and degrade, causing them to fail. If the carburetor cannot mix the gas and air properly because of missing or broken components in the diaphragm, this kit can provide the replacement pieces that are needed for compatible engines. Without a functional carburetor, the engine will fail to run properly or may not run at all, which is why a replacement is essential. This OEM replacement kit fits select engines that feature 2-5 HP and a horizontal crankshaft, found on various models of lawn equipment. It is compatible with tillers, chippers, and other lawn machines, and is fully-compliant with all EPA guidelines. Whenever working on the carburetor, it is essential to disconnect power to the engine and drain the gas. Only perform repairs on a fully-cooled engine for safety. This replacement kit is sold as an individual unit and includes three pieces.

This is a replacement fuel solenoid for Briggs & Stratton engines on some Toro lawn mower models. The fuel solenoid, also called a fuel shut-off solenoid, is responsible for stopping the flow of fuel through the line to the engine after it has been turned off. This prevents unspent fuel from collecting and causing backfiring when the mower is restarted. The fuel solenoid is an electromechanical component that is subject to wear and tear over time and through normal use. Eventually, the mechanical actuator will wear out, and the solenoid will need to be replaced. The solenoid can also suffer from electrical failure. Physical damage to the solenoid is unlikely, though. To replace the solenoid, make sure the engine is off. Locate the solenoid on the engine, and use pliers to crimp the fuel line and prevent spilling. Unscrew the old solenoid and remove the wiring harness. Install the new solenoid, reconnect the wiring harness, and uncrimp the fuel line. This is a genuine OEM replacement solenoid and is sold individually. It is compatible with over 150 different Toro lawn mowers and lawn tractors.