Parts for Frigidaire FLCG7522AW0: Motor / Blower / Belt Parts

Secures the blower wheel to the motor shaft in your dryer. Replace if worn, loose, or causing rattling noises to restore proper airflow. Verify fit by model.

Replaces the outer cabinet housing that supports internal components. Needed when the original is cracked, damaged, or structurally compromised.

Dryer not heating or taking too long? A damaged blower wheel restricts airflow. This repair prevents costly replacement and takes 1-2 hours with basic tools.

Dryer not heating or overheating? A faulty control thermistor may send incorrect temperature data to the control board. 30-min repair with video.

Fix loud vibrations or wobbling during spin cycles with this motor cradle assembly. Secures the motor in place. Moderate difficulty repair, 1-2 hours.

Appliance won't start or shuts off unexpectedly? This limit safety switch prevents overheating by cutting power when faults are detected. Restores protection.

Maintains tension on the dryer idler arm and drive belt. Replace if spring is stretched, broken, or missing to restore proper belt tension and drum rotation.

Idler arm assembly maintains drum belt tension in your dryer. Replace if the pulley is cracked, worn, or the arm is broken to restore smooth drum rotation.

Dryer drum won't turn or making loud banging noises? A broken drum belt is the likely cause. This belt connects the motor to the drum for rotation.

Secures the dryer motor in proper position for stable operation. Replace if motor shifts, buzzes, or clamp strips out. Confirm fit with your model number.

Dryer won't start or just hums when you press the button? This drive motor assembly fixes starting failures and humming issues. DIY repair in 1-2 hours.

Replacement power cord for laundry centers. Restores electrical connection when original cord is damaged, frayed, or missing. Includes durable insulation.

Fix leaking or kinked hoses with this 90-degree tubing elbow connector. Restores proper water routing in your laundry center. Simple snap-in repair.

Pan head mounting screw for dryers. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

This mounting bracket secures and supports appliance panels and internal components, restoring proper alignment and stable operation. It's a simple replacement that helps eliminate loose panels and rattling. What it does

• Provides a secure anchor point to hold panels, rails, or assemblies in place
• Restores correct alignment to doors or access panels when a bracket is broken or bent
• Reduces vibration and rattling caused by a loose or missing support
• Matches OEM fit and function for straightforward replacement

• One mounting bracket

• Disconnect power and, if applicable, water before starting any repair
• Inspect surrounding parts and fasteners; replace any damaged screws or clips
• Use appropriate tools and fasteners for a secure installation; avoid overtightening
• Handle sharp edges carefully and test panel alignment after installation

External mounting bracket for laundry center units. Secures and supports the appliance frame. Replace if bent, cracked, or missing for proper installation.

Control panel cover for laundry center units. Replaces cracked, broken, or missing covers. Protects internal controls and completes front panel.

Snap-in bushing for washer assemblies. Replaces worn, cracked, or missing bushings that provide cushioning and support in internal components.

Replacement pipe for laundry center. Connects water or drainage components within your unit. Needed when original is cracked, broken, or leaking.

Replacement pipe cap for dryers. Covers and seals pipe openings in your dryer's internal system. Order a new cap if yours is cracked, broken, or missing.

This push-in clip rivet secures trim and lightweight panels on appliances, restoring snug fits and preventing rattles or loose trim. Durable plastic construction provides a simple, reliable hold where small fasteners are used. What it does:

• Acts as a push-in retainer to hold trim, panels, or small components in place
• Replaces broken or missing clips that cause loose or rattling parts
• Keeps panels aligned to prevent gaps that collect dirt or impede operation
• Simple mechanical fastening—no threading or separate hardware required

• One clip rivet

• Typically installs by pushing into the corresponding hole until it snaps flush
• May require removal of surrounding trim or panel to access the clip location
• Use appropriate-size replacement; forcing the wrong size can damage the panel
• Disconnect power and follow appliance-specific safety instructions before servicing

Dryer not heating or igniter glows but won't light? This gas valve controls gas flow to the burner. Moderate DIY repair for laundry center dryers.

Burner orifice that meters gas flow to your dryer's burner. Replace if clogged, damaged, or wrong size for fuel type during LP/natural gas conversion.

Dryer not heating? A failed igniter won't light the gas burner. This glow-bar igniter heats up to ignite gas during each cycle. Moderate DIY repair.

Replacement mounting collar secures and aligns dryer components for proper fit. Replace when worn or damaged to restore original spacing and support.

Fixes a cooktop burner that won't heat, heats intermittently, or shows visible cracks. Direct heating element replacement restores one cooking zone.

Dryer won't heat? A faulty gas burner assembly prevents proper flame and ignition. This part restores heat for efficient drying. DIY repair in 1-2 hours.

Dryer not heating or flame goes out after igniting? This flame sensor monitors burner temperature to regulate gas flow. Easy 15-minute DIY repair.

Replaces missing, stripped, or rusted 8-18 thread screws that secure dryer panels, brackets, and components for tight, rattle-free assembly.

Secures wiring and hoses to your laundry center frame. Replace if cracked, broken, or missing to keep wire bundles organized and protected from wear.

Mounting screw for dryers. Secures panels, components, or housing. Replace if lost, stripped, or damaged during appliance maintenance or repair.

Convert your gas dryer from natural gas to propane fuel. Complete kit includes all necessary parts and detailed instructions for safe conversion.