Kenmore Washer Dryer Combo 110.98752793 (11098752793, 110 98752793) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694424
The Natural Gas Limiter is an OEM replacement part for Whirlpool dryers. Located where the gas supply connects, it regulates safe flow levels to fuel burners during heating cycles. Precise control prevents over-firing issues.
Symptoms of a faulty limiter include:
- Dryer not achieving proper temperatures or taking too long
- Yellow flames indicating abnormal gas-to-air ratios
- Fault codes showing problems with gas valve readings
Causes can range from debris accumulation reducing gas flow to mechanical wear of linkage components. This replacement restores optimized operation.
This OEM replacement part is compatible with select KitchenAid and Maytag brand models.
Do-It-Yourself Stories from Customers like You
I needed to convert from lp to natural gas Mark S. • Raleigh , NC • June 01, 2015
Removed LP Orifice and LP Gas limiter.
Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP.
I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just...
Read more
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3349985
The Cover Seal is an OEM part for Whirlpool washing machines. This seal ensures a tight fit between the washer's cover and the tub, preventing water from leaking during the wash cycle. It helps maintain the efficiency and cleanliness of the washing process by keeping water contained within the tub.
Common causes of a bad seal include wear and tear over time, exposure to harsh detergents, or physical damage from regular use.
Symptoms of a bad cover seal include:
- Water leaking from the washer
- Excess moisture around the washer
- Visible cracks or deformities in the seal
- Reduced washing efficiency
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Washer would not spin Joseph S. • La Grange , KY • February 14, 2016
Disassembled and confirmed the clutch was bad. Also noticed a slight leak from the transmission shaft seal. Ordered replacement clutch, seal and oil from appliancepartspros.com. The parts arrived very quickly and exactly as ordered. Their repair videos were very accurate and made the job easy. I accomplished a quality repair at a reasonable cost. My thanks to the folks at appliancepartspros.com for making it possible!
Read more
More
$19.95
- Compare At:
-
$23.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 279264
The Front Bearing and Seal Kit is an OEM replacement part for Whirlpool dryers. This kit includes the front bearing and seal for the dryer drum, which work together to provide smooth operation and prevent premature wear.
Causes of a bad front bearing and seal can include regular wear and tear from normal use, heavy loads that place extra strain on the bearings, or debris accumulation causing increased friction.
Symptoms of issues include:
- Noisy or grinding sounds coming from the drum area
- Vibration noticed during the operation
- Difficulty turning or rotating the dryer drum by hand
- Reduced efficiency and longer drying times
This OEM replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016
After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify...
Read more
More
$59.95
- Compare At:
-
$71.34
- You Save:
-
$11.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 285352
The Gearcase Oil Seal is an OEM part for Whirlpool washing machines. This seal is located in the gearcase, preventing oil from leaking out while ensuring the internal components are properly lubricated. The kit contains two plastic seals that slide over the shaft to create a tight oil barrier.
Causes of a bad oil seal can include wear and tear over time, exposure to high friction and heat, or accidental damage during maintenance. A faulty oil seal can lead to oil leaks, which may cause further damage to the gearcase and other components.
Symptoms of a bad gearcase oil seal include:
- Oil leaks underneath the washer
- Loud noises during operation
- Washer not spinning or agitating properly
- Visible wear or damage to the seal
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Not spinning clothes dry Marjorie S. • Lansing , NC • December 16, 2017
Replaced clutch assembly, gearcase input shaft seal and motor coupler. When I disassembled the washer I realized the shaft seal on the top of the gearcase was leaking and not the input shaft seal. So had to order more parts before I could finish this job. Altogether I replaced agitator dogs, both seals on the gearcase, the clutch assembly and the motor coupler.
Agitator dogs replacement is a very easy job, no tools required, takes less that 5 minutes and made a huge difference with how well...
Read more
More
$45.95
- Compare At:
-
$54.22
- You Save:
-
$8.27
Genuine Whirlpool part
By: Whirlpool
Part Number: 388253A
The Neutral Drain Kit is an OEM part for Whirlpool washing machines. This kit facilitates the neutral drain function, which allows the washer to drain water without spinning the tub, ensuring efficient water removal before the spin cycle begins.
Causes of a bad neutral drain kit can include wear and tear over time, mechanical failure of the components, or damage due to improper installation or handling. A faulty neutral drain kit can lead to draining issues, affecting the overall performance of the washing machine.
Symptoms of a bad neutral drain kit include:
- Washer not draining properly
- Extended or incomplete drain cycles
- Water remaining in the tub after the drain cycle
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Teeth stripped from gear in transmission Robert G. • Wentzville , MO • June 17, 2015
The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as...
Read more
More
$46.95
- Compare At:
-
$55.87
- You Save:
-
$8.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Water leaks around the hose connection points
- The hose slipping off the fitting
- Visible rust or wear on the clamp
- Difficulty in tightening the clamp to secure the hose
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684
The Lid Strike is an OEM part for Whirlpool washing machines. This small yet essential component ensures that the washer lid is securely latched, allowing the machine to operate safely and effectively. The lid strike interacts with the lid switch, enabling the washer to detect when the lid is closed and allowing the washing cycle to proceed.
Over time, the lid strike can become worn out or damaged due to regular use, accidental force, or misalignment. A faulty lid strike can prevent the washing machine from recognizing that the lid is closed, thereby hindering the operation of the machine.
Symptoms of a bad lid strike include:
- The washer not starting or stopping mid-cycle
- Error messages indicating the lid is open when it is closed
- Difficulty in latching the lid securely
- The lid strike appearing broken or misaligned
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not agitate
-
Will not drain
-
Won't start
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The spin cycle would not initiate pump to drain tub Douglas B. • Skull Valley , AZ • January 21, 2017
Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W11095997
The Seal is an OEM part for Whirlpool washing machines. This part provides a tight seal around the washer shaft, preventing water from leaking out of the tub during the wash cycle.
Causes of a bad shaft seal can include wear and tear over time, exposure to harsh detergents or cleaning agents, or damage from foreign objects that may have gotten into the washer.
Symptoms of a bad shaft seal include:
- Water leaking from the bottom of the washing machine
- Excessive noise during operation
- Visible damage or wear on the seal
- Wet spots or puddles under the washer
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Agitator would not work David W. • Murfreesboro , TN • November 19, 2014
Used the parts and youtube video from your company.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3398128
The Thermostat is an OEM part for Whirlpool dryers. It plays a critical role in regulating the temperature inside the dryer by cycling the heating element on and off to maintain the desired level of heat. This ensures that clothes are dried efficiently and safely.
Common causes of a bad thermostat include electrical malfunctions, overheating, or wear and tear over time. These issues can prevent the thermostat from accurately controlling the temperature, leading to drying inefficiencies or potential safety hazards.
Symptoms of a bad Thermostat include:
- The dryer not heating up
- Overheating or extremely high temperatures
- Clothes taking too long to dry
- The dryer shutting off prematurely
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Thermostat and thermofuse Britt A. • Concord , NC • February 16, 2015
Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping!
Read more
More
$52.33
- Compare At:
-
$62.27
- You Save:
-
$9.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10080230
The Clutch Retaining Clip is an OEM part for Whirlpool washing machines. This clip secures the clutch assembly, which is essential for the proper engagement and operation of the washer's transmission.
Causes of a bad retaining clip can include repeated mechanical stress, corrosion, or accidental damage during maintenance or repair.
Symptoms of a bad retaining clip include:
- Washer not spinning or agitating properly
- Unusual noises during operation
- Excessive vibrations or movement
- Washer failing to complete cycles correctly
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Washer would not agitate Robert C. • Newark , DE • September 25, 2014
Took washer apart to find a bad Neutral Drain Transmission. Ordered part from here and fixed with no problems.
Read more
More
$7.78
- Compare At:
-
$9.34
- You Save:
-
$1.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WP686711
The Handle, Door (White) is an OEM part for Whirlpool appliances, specifically designed for washing machines and dryers. This handle allows users to open and close the appliance door easily and securely, providing a reliable grip.
Causes of a bad door handle can include regular wear and tear, accidental impacts, or exposure to harsh cleaning chemicals that can weaken the material over time.
Symptoms of a bad door handle include:
- Difficulty opening or closing the door
- Loose or wobbly handle
- Visible cracks or breaks in the handle
- The handle coming off completely
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Door handle on an older dryer had broken Richard B. • Apollo Beach , FL • January 19, 2019
Bought a new snap-in replacement.
Read more
More
$10.43
- Compare At:
-
$12.31
- You Save:
-
$1.88
Genuine Whirlpool part
By: Whirlpool
Part Number: 350572
The Gear Case Oil is an OEM part for Whirlpool washing machines. It lubricates the gears and components within the washing machine’s transmission, ensuring smooth and efficient operation during the wash and spin cycles.
Causes of bad gear case oil can include degradation over time, contamination from water or debris, and leaks due to worn seals or gaskets.
Symptoms of a bad gear case oil include:
- Loud or unusual noises during the wash or spin cycles
- The washing machine not agitating or spinning properly
- Oil leaks visible under the washing machine
- Increased friction or overheating of the transmission components
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Teeth stripped from gear in transmission Robert G. • Wentzville , MO • June 17, 2015
The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as...
Read more
More
$49.21
- Compare At:
-
$58.56
- You Save:
-
$9.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63134
The Sound Dampening Ring is an OEM replacement part for Whirlpool washing machines. Located within the clutch housing, it serves to minimize noise transmission from internal components.
Causes relate to years of absorbing internal impacts fatiguing the damping material. Buildup of grime and detergent residue in its ridges may diminish noise-isolating effectiveness over time.
Symptoms of failure include:
- Excessive humming or clanking sounds from the transmission area
- Increased cabinet vibrations felt externally during operation
- Improper sound insulation leads to a louder overall noise profile
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our washer quit spinning Howard H. • Walton , KS • November 16, 2015
I did some research to diagnose the problem.After watching the videos I determined it needed
a clutch kit. I didn't know the first thing about washing machines,but I ordered the parts and with
the provided video,it was a piece of cake. Our washer works great now!
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 279393
The Terminal Block Screw Kit is an OEM replacement part for Whirlpool dryers. It is an assembly of screws used to securely fasten electrical terminal blocks within the dryer's control panel. Includes 3 screws and 3 nuts. Screw kit for dryer cord connector.
Over time, terminal block screws can become loose, corroded, or damaged due to regular use or electrical issues. If the terminal block screws are compromised, it can lead to electrical problems or even pose a safety hazard.
Symptoms of a faulty terminal block screw kit include:
- Intermittent power or failure of heating/fan elements to engage
- Repeated blowing of internal fuses or tripping of circuit breakers
- Hot terminal connections detected during operation
- Arc flashes, sparks, or smoke seen around the control panel area
This genuine Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.
Do-It-Yourself Stories from Customers like You
Dryer would not turn on. Keith K. • Melbourne , FL • May 19, 2020
And after replacing the thermal fuse The dryer turned on.
Read more
More
$29.95
- Compare At:
-
$35.64
- You Save:
-
$5.69
Genuine Whirlpool part
By: Whirlpool
Part Number: 279318
Includes screws and wire connectors. For the complete terminal block kit use 279320.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Loose wire in back caused a short and burned out plug insulator etc William W. • Pottsboro , TX • February 15, 2019
I ordered the parts through AppliancePartsPros.com. They were delivered the next day. I installed them and the dryer works great.
Read more
More
$52.31
- Compare At:
-
$62.25
- You Save:
-
$9.94