Range / Cooktop / Oven Handle

Genuine Ge part

Cap Handle L

By: Ge

Part Number: WB7K111

$11.95

Compare At:: $12.67
You Save:: $0.72

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Trim - Handle

By: Ge

Part Number: WB7X727

$14.31

Compare At:: $28.41
You Save:: $14.10

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Best Seller

Genuine Frigidaire part

Handle

4.8 (5)

By: Frigidaire

Part Number: 316545300

The Handle is an OEM replacement part for Frigidaire ovens. It is designed to provide a sturdy grip for opening and closing the oven door, ensuring ease of use and safety during cooking.

The handle can become worn or damaged over time due to regular use, exposure to heat, or accidental impact. Repeated opening and closing of the oven door can lead to loosening or breakage.

Symptoms of a bad handle include:

The handle feeling loose or wobbly
Difficulty in opening or closing the oven door
The handle becoming detached from the door
Visible cracks or damage to the handle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You The handle on my oven door had been stripped out on one side and broken on the other for about a year. Bill E. • Illinois City , IL • December 28, 2020

I don’t know why I put it off so long. The parts were inexpensive, arrived in two days, and it took me all of five minutes to put it on. Read more

Best Seller

Genuine Ge part

Oven Door Handle

4.6 (8)

By: Ge

Part Number: WB15K5068

The Oven Door Handle is an OEM replacement part for GE electric ranges. As the primary grip point, the oven door handle allows for safe opening and closing of the oven door.

Causes can be normal fatigue of plastic or metal following extensive heat cycles. Impacts and stresses from loading/unloading also intensify wear and tear.

Symptoms of a bad handle include:

Loose, shaky or unstable gripping during opening/closing
Parts cracking, breaking or falling off from wear over time
Difficulty accessing oven interior or positioning latch mechanisms

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken oven handle Barbara B. • Bryan , TX • September 30, 2014

I removed the screws on the top edge of the oven door to release the front panel to the back panel. I then removed the screws securing the handle in place. I screwed in the new handle (that I received in less than 24 hours from the time I placed the order, I might add!). Screwed the two panels back together and complete! Read more

Best Seller

Genuine Ge part

Drawer Handle

4.4 (7)

By: Ge

Part Number: WB15T10136

The Drawer Handle is an OEM part for GE ranges. This handle is designed to provide a secure and comfortable grip for opening and closing the storage drawer.

Causes of a bad drawer handle can include regular wear and tear, physical damage from impacts, or exposure to high temperatures.

Symptoms of a bad drawer handle include:

The handle becoming loose or wobbly
Visible cracks or breaks in the handle material
Difficulty in gripping the handle securely
The handle detaching from the drawer

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Replace oven handle Walter B. • Columbia , SC • February 17, 2017

Took old one off, put new one on Read more

Best Seller

Genuine Ge part

Handle End Cap (Blk)

4.8 (5)

By: Ge

Part Number: WB07K10013

Do-It-Yourself Stories from Customers like You The handle on the oven door broke off William O. • Hobe Sound , FL • August 12, 2019

I, William’s mom, broke the handle so I felt responsible for the repair. I’m 60 years old and not too mechanically inclined! I called your customer service number and the very nice guy, who was taking my order, was the most helpful young man! He helped me understand what parts I should need and the order arrived EXACTLY as I was expecting!!! A few YouTube videos and I was able to remove the oven door and put the new handle back on... however I didn’t have the strength to get it back on the... Read more

Genuine Ge part

Handle Assembly (Blk)

5.0 (3)

By: Ge

Part Number: WB15T10030

Do-It-Yourself Stories from Customers like You Broken oven handle Mary J. • Wind Lake , WI • February 17, 2017

Replaced with new handle assy Read more

Genuine Frigidaire part

End Cap

5.0 (1)

By: Frigidaire

Part Number: 316137000

Do-It-Yourself Stories from Customers like You Renter broke the handle off the oven Brian W. • Brunswick , GA • November 16, 2014

Who does that? I've lived in my house for many years and never have done the damage that a renter can do in just 1 year. Looked up the Serial number and found the parts I needed easily. Ordered them and they arrived in about 3 days. Fit perfectly. Read more

Genuine Ge part

Oven Door Handle (White)

5.0 (2)

By: Ge

Part Number: WB15T10188

This white door handle mounts to the oven door to provide a secure grip when opening and closing. It replaces a broken or discolored handle and restores the look and usability of your appliance. What it does:

Serves as the exterior grab handle on the oven door
Allows you to open and close the door securely
Common fix for a cracked, broken, loose, or yellowed handle
Refreshes the appliance's appearance after cosmetic wear

What's included:

One white handle

Install notes:

Disconnect power at the breaker and allow the oven to cool completely
Support the door to prevent strain while removing the old handle
Access and remove the handle's mounting screws; install the new handle using existing hardware
Tighten screws evenly and verify smooth door operation

Do-It-Yourself Stories from Customers like You Broken oven door handle Chuck S. • Green Valley , AZ • March 19, 2020

Purchased a new handle from you. Read more

Genuine Whirlpool part

Door Handle (30-Inch)

5.0 (1)

By: Whirlpool

Part Number: WP2411F013-71

30-inch door handle replacement that restores a secure grip and the door's appearance. Replaces cracked, loose, or broken handles so you can open and close the appliance door safely and with confidence. What it does:

Provides a comfortable, secure grip for opening and closing 30-inch appliance doors.
Replaces damaged, loose or broken handles to restore normal door operation and appearance.
Designed as a direct replacement for the factory door handle mounting pattern.
Helps prevent accidental drops or slippage when opening a hot or heavy oven/range door.

What's included: One 30-inch door handle. Install notes:

Always disconnect power to the appliance and allow it to cool before beginning any repair.
Support the door during removal and installation; have a helper if the door is heavy or awkward.
Use the correct screwdriver or bit for the mounting screws and keep removed hardware organized for reinstallation.

Do-It-Yourself Stories from Customers like You Stove handle Brenda A. • Monroe , LA • June 18, 2020

It worked great, fit perfect. Now I have a stove with a new handle. Thanks. Read more

Genuine Ge part

Handle Cap - Rt (Wh)

4.0 (1)

By: Ge

Part Number: WB7K5338

Do-It-Yourself Stories from Customers like You End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019

Somewhat difficult to slide back on because pieces of the old tabs were stuck in the crevace, but once I realized and fished them out the next challenge was finally figuring out part went inside the crevace and part (a tab) went outside on the back of the handle. If you bend over and look up underneath it is easy to see how it goes, but apparently over the years the handle had gotten just out of shape enough that the caps did not readily slide on. Be careful you don't snap a tab or post off. ... Read more

Genuine Ge part

Oven Door Handle

By: Ge

Part Number: WB15K10048

Color: White

Genuine Ge part

Handle Cap (Light White)

4.0 (1)

By: Ge

Part Number: WB7K5339

This handle cap is a replacement end cover that restores the clean finished look and protects the handle mounting on compatible refrigerators. It keeps the handle edges covered and helps prevent snags and cosmetic damage. What it does:

Covers and protects the exposed end of a refrigerator door handle for a finished appearance
Conceals handle mounting hardware and reduces dirt build-up around the handle area
Helps prevent clothing snags and minimizes wear at the handle end
Matches light white finish to blend with white appliance trim

What's included:

One handle cap

Install notes:

Remove original cap by following the appliance manual; some models use hidden clips or a retaining screw
Keep existing mounting hardware — this cap is a cosmetic cover and typically uses factory fasteners
Avoid over-tightening clips or screws to prevent cracking the cap

Do-It-Yourself Stories from Customers like You End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019