Refrigerator Defrost Heater, Icing Kit, Fountain Heater

This defrost heater melts frost and ice on the evaporator so the refrigerator can cycle normally and maintain proper airflow. Replaces a failed or broken heater to restore automatic defrost operation. What it does:

• Heats the evaporator during the defrost cycle to remove accumulated frost and ice
• Helps prevent blocked airflow and extended cooling cycles caused by ice buildup
• Commonly replaced when evaporator is iced over or defrost system fails
• Works as part of the appliance's timed or adaptive defrost system

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle the heater and evaporator fins carefully to avoid damage or bending
• Inspect mounting clips and terminals; replace if corroded or damaged
• Verify continuity with a multimeter before and after installation

This defrost heater kit heats the evaporator to melt frost and ice buildup so the refrigerator can cycle normally and maintain proper cooling. It's a direct-replacement kit for units that use a heater-style defrost assembly. What it does:

• Warms the evaporator coil during the defrost cycle to remove frost and ice
• Helps restore normal airflow and cooling when frost buildup blocks the evaporator
• Commonly used when a refrigerator has excessive frost, poor cooling, or no active defrost
• Works with the existing defrost control and thermostat to allow automatic defrost cycles

• Disconnect power to the appliance before starting any service
• Handle evaporator fins and sharp sheet metal with care; wear gloves and eye protection
• Reassemble panels and restore power; check for proper defrost operation after installation

This dispenser heater kit warms the dispenser area to help prevent ice build-up and keep the water/ice dispenser operating reliably. Replaces a failed heater assembly to restore proper dispenser function. What it does:

• Heats the dispenser chute/valve area to reduce frost and ice clogging
• Helps restore reliable water or ice dispensing when the dispenser intermittently freezes
• Prevents repeated thaw cycles that can cause leaks or inconsistent dispense flow
• Works as the direct replacement heater component used in the dispenser assembly

• Disconnect power to the appliance before beginning any work
• Access may require removing the dispenser housing or control panel
• Handle electrical connections carefully and secure wiring per OEM routing

This fixture heater is the heater assembly used to warm a targeted appliance component so the unit operates correctly and resists ice buildup. It restores heat where a small, localized heater is required. What it does

• Provides localized heat to a fixture or component to prevent freezing and help normal operation.
• Warms internal surfaces that can collect frost or condensation, reducing ice buildup.
• Restores heat when a failed heater causes intermittent or no warming at the fixture.
• Helps eliminate symptoms such as frost accumulation, poor component function, or temperature-related faults.

• One fixture heater assembly.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Handle terminals and wiring carefully; match wire connections and secure all fasteners.
• Use basic hand tools; for correct routing and placement.

The Water Tank Heater is an OEM component for GE bottom-mount refrigerators offering internal water and ice dispensing. Located within the drinking water reservoir, it facilitates antibacterial heating cycles. Dependable water delivery relies on a functioning tank heater.

Symptoms of failure include:  

• Absence of hot water from the dispenser or ice maker
• Cloudy or sedimented water quality needs frequent filter changing  
• Mold or bacterial growth detected within the reservoir

Causes involve cracked or porous heater elements that cannot transfer thermal energy effectively over extended years, loose wiring terminals cutting off electric current, or mineral buildup hindering heat transfer to the surrounding tank.

Replacing with this genuine GE heater ensures optimized reservoir sanitization through precise temperature regulation. Compatible replacements include models for Hotpoint, RCA, and Kenmore side-by-side refrigerators seeking to restore hot water dispensing and purification features.
 

This refrigerator temperature sensor detects fresh-food compartment temperature and provides the thermostat/control board with the readings needed for proper cooling management. Replacing a failed sensor restores accurate temperature feedback to the control system. What it does:

• Measures internal fresh-food compartment temperature for the control board
• Helps the fridge regulate run cycles to maintain set temperatures
• Faulty sensor can cause incorrect temperature display or inconsistent cooling

• Always unplug the appliance before attempting any repair.
• Handle the sensing tip and wiring harness gently to avoid damage.
• Use basic hand tools; follow the wiring diagram for location and routing.

This sheathed defrost heater mounts at the evaporator and melts frost during the automatic defrost cycle to restore airflow and stable temperatures. Replacing a failed heater helps prevent ice-clogged coils, warm spots, and noisy fan interference.

• Melts frost from the evaporator coil during the defrost cycle to maintain proper airflow
• Symptoms of failure: persistent ice on the back panel, weak cooling, or the evaporator fan striking ice
• A failed heater can cause long run times and temperature swings
• Replace if the element tests open/short or shows visible damage

• Disconnect power before service; allow components to warm to reduce risk of cracking brittle plastics
• Remove shelves and the evaporator cover; carefully defrost ice—do not chip or pry against the fins
• Transfer original clips/insulators if present; route wires as original and make firm electrical connections
• After reassembly, ensure the drain area is clear and the fan spins freely

Defrost heater that melts frost from the evaporator coil so the refrigerator can maintain efficient cooling. Replacing a failed heater restores normal defrost cycles and helps prevent ice buildup that blocks airflow. What it does:

• Heats the evaporator coil during the defrost cycle to remove frost and ice buildup.
• Restores proper airflow and cooling when ice accumulation was restricting the evaporator.
• Common symptoms of a failing heater: visible frost or ice on the evaporator, freezer running warm, or extended run times.
• Works with the appliance's defrost thermostat and control to complete the defrost cycle.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Handle the heating element carefully; avoid bending or damaging the coil or terminals.
• Verify the part number matches your appliance before installation.
• If other defrost components (thermostat, control board, sensors) show signs of failure, inspect and replace them as needed.