Need Help?
Call or text
Show parts
Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.
Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.
Secures the hinge to your refrigerator cabinet or door. Replace this bolt if stripped, missing, or corroded to restore proper door alignment and stability.
Secures panels, brackets, and internal components in your refrigerator. Replace this mounting screw if the original is missing, stripped, or damaged.
Replacement mounting bolt for refrigerator components and assemblies. Needed when original fastener is missing, stripped, or damaged during service work.
Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.
Secures panels, brackets, and trim components inside your refrigerator. Replace this fastener if it's stripped, lost, or damaged to restore alignment.
This part is discontinued by the manufacturer and is no longer available for purchase.
Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.
Replacement mounting screw for refrigerator panels, trim, and components. Secures loose or missing fasteners to reduce vibration and keep parts in place.
Usually ships within 4 - 14 days
Replacement mounting screw for refrigerator assembly. Secures panels, brackets, or components. Needed when original screw is stripped, lost, or damaged.
Replacement screw for refrigerator panels, brackets, and trim. Secures components to restore proper alignment and prevent rattling from loose parts.
Replacement mounting screw secures panels, brackets, and components inside your refrigerator. Needed when original screw is missing, stripped, or worn.
Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.
Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.
Multi duct assembly for refrigerators. Directs airflow between compartments. Replace if cracked, broken, or missing to restore proper air distribution.
Stores ice from the icemaker in your freezer. Replace if bucket is cracked, broken, warped, or missing. Installs in the freezer door or compartment.
Bottom freezer basket for refrigerators. Organizes frozen foods in the lower freezer compartment. Replace if cracked, broken, or damaged from impact.
Replacement shelf assembly for refrigerators. Installs inside fresh food compartment. Needed when original shelf is cracked, broken, or missing.
Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.
Rail guide assembly for bottom-mount refrigerator drawers. Replaces broken or worn guides that cause drawer misalignment or difficult sliding.
Replacement drawer slide rail guide for refrigerators. Restores smooth drawer operation when original is cracked, broken, or worn. Keeps drawer aligned.
Internal air duct assembly for bottom-mount refrigerators. Routes airflow from fan housing through cabinet. Replace when cracked, damaged, or leaking air.
Right-side support rail for refrigerator freezer baskets. Replaces cracked, broken, or worn rails causing baskets to slide poorly or fall off track.
Replacement fresh room tray assembly for LG and Kenmore refrigerators. Install this tray if yours is cracked, broken, or has a damaged handle.
Left-hand support rail for bottom freezer baskets. Replace this plastic slide rail if cracked, broken, or missing to restore smooth drawer operation.
Replaces cracked or damaged crisper drawer in your refrigerator. Restores secure storage for fruits and vegetables with proper support and organization.
Replacement crisper drawer assembly for your refrigerator's fresh food compartment. Restores organized produce storage when original is cracked or missing.
Protect your refrigerator's interior light bulb with this transparent lamp cover. Replace if cracked, yellowed, or broken to restore proper lighting.
The Refrigerator Light Lens is an OEM part for LG refrigerators. It serves as a protective cover for the interior lighting system, shielding the light bulbs or LEDs from dust, moisture, and accidental impacts. The lens measures about 14 inches wide by 5-1/2 inches deep.
Symptoms of a faulty light lens:
Causes of a bad light lens can include physical damage from impact, exposure to extreme temperatures or moisture, or general wear and tear over time.
This OEM LG part is also compatible with Sears/Kenmore refrigerator models.
Drawer rail guide assembly for bottom-mount refrigerators. Supports and aligns drawer slides for smooth operation. Replace if cracked, broken, or worn.
Replacement guide assembly that secures and aligns internal refrigerator components. Use when panels sit loose, or guides are cracked, broken, or missing.
Plastic and metal guide assembly that positions and secures internal components in your refrigerator. Replace if cracked, broken, or missing.
Supports and guides refrigerator drawer for smooth opening and closing. Attaches to cabinet wall. Replace if cracked, worn, or causing drawer misalignment.
Supports and aligns pull-out drawer slides for smooth, even gliding. Replace if your rail guide is cracked, broken, or missing to restore stable drawer operation.
Creates an airtight seal around your refrigerator door to prevent warm air from entering. Replace if torn, cracked, or no longer sealing properly. Easy snap-fit installation. Confirm fit with your model number.
Replaces the hinged door on your dishwasher's silverware basket. Restores secure closure to keep utensils contained during wash cycles when original is broken, cracked, or missing.
Left-hand end cap for refrigerator tilt-out freezer basket. Replaces broken, cracked, or missing basket support caps. Secures basket to frame rails.
End cap for freezer door basket. Secures and supports tilt basket assembly. Replace if broken, cracked, or missing. Right-hand side installation.
Left side.
Right side.
Replacement control panel cover frame for refrigerators. Restores the finished trim around controls. Replaces cracked, warped, or scratched frames.
Replaces the mullion cover frame that separates fresh food and freezer sections. Needed when original is cracked, warped, or broken. Restores appearance.
The Door Latch Cam is an OEM part for LG refrigerators. This component is integral to the proper functioning of the refrigerator door latch system, ensuring the door stays securely closed.
Over time, the door latch cam can become worn out or damaged due to frequent use, exposure to moisture, or accidental impact. When the cam is compromised, it can affect the door's ability to seal properly, which can lead to energy inefficiency and potential spoilage of food.
Symptoms of a bad door latch cam include:
This OEM LG part is also compatible with Sears/Kenmore.
The Camshaft is an OEM part for LG refrigerators. It plays a crucial role in the proper operation of the refrigerator's door hinge, ensuring smooth and secure opening and closing. The camshaft helps align the door and maintains the seal, preventing warm air from entering the refrigerator.
You should replace the camshaft if it becomes worn out or damaged. Causes of a bad camshaft can include wear and tear from frequent use, physical damage from impact or mishandling, and misalignment issues that stress the camshaft over time.
Symptoms of a bad camshaft include:
This OEM LG part is also compatible with Sears/Kenmore models.
Drawer guide rail for refrigerator storage drawers. Ensures smooth gliding operation. Replace if broken, cracked, or missing to restore proper drawer function.
This refrigerator door basket mounts on the inner door and holds bottles, jars, and condiments. Replace a cracked or missing upper bin to restore secure, organized storage and keep frequently used items within easy reach.
What's included: 1 door basket Install notes:
Wire door shelf for refrigerator that mounts inside the door for storage. Replace when cracked, broken, warped, or missing to restore door organization.
Replacement door bin with integrated dairy tray for refrigerators. Installs in door slots to store condiments, drinks, and dairy items. Replace if cracked or broken.
Sleeve that fits over the hinge pin for smooth door pivoting. Replace when doors wobble, squeak, or don't align properly. Confirm fit with your model.
Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.
Replace your refrigerator's damaged or broken door handle. Installs on the exterior door for opening and closing. Ideal for cracked, worn, or missing handles.
Refrigerator shelf holder rail that supports and guides removable shelves. Replace if cracked, broken, or worn to restore proper shelf positioning.
Rail guide assembly for bottom-mount refrigerator shelves. Replaces broken or worn guides that support sliding shelf movement. Direct fit component.
Trim piece that conceals and protects refrigerator connection areas. Replace if cracked, broken, or missing to restore a finished look and shield wiring.
Slide rail for bottom-mount refrigerator freezer drawer. Replaces broken, binding, or worn rails that prevent drawer from opening or closing smoothly.
Slide rail for bottom-mount refrigerator freezer drawers. Replaces broken, cracked, or binding rails causing uneven drawer movement or closure issues.
Wire harness assembly for bottom-mount refrigerators. Connects electrical components throughout the unit. Replace if wires are frayed, damaged, or corroded.
Connects two water tubes in your refrigerator's plumbing system. Replace this joint assembly if it's cracked, leaking, or damaged to restore a secure seal.
Protective cap cover for refrigerator freezer drawer roller gears. Replaces broken, cracked, or missing caps that secure drawer components and mechanisms.
Freezer drawer slide gear mounts behind the basket to guide smooth in-and-out movement. Replace if cracked, broken, or worn from regular use.
Supports the center door on bottom-mount refrigerators. Replace if your hinge is cracked, worn, or broken to restore proper door alignment.
Adjusts refrigerator door height for proper alignment and sealing. Replace if door doesn't close easily or seal correctly. Verify fit with model number.
Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.
Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:
Replaces a damaged, cracked, or missing exterior cover panel on your refrigerator. Restores appearance and protects internal components from dust.
Molded trim piece that snaps over the refrigerator door hinge. Replace if cracked, broken, or missing to restore appearance and protect hinge area.
Plastic cover cap that conceals and protects the hinge assembly on your refrigerator door. Replace if cracked, broken, discolored, or missing for a clean finish.
Plastic cap that covers and seals the air duct in your refrigerator. Replace if cracked, broken, or missing to maintain proper airflow and appearance.
Fixes refrigerator water dispenser not working or touchpad not responding. Restores electronic control and power to dispenser components. Moderate difficulty.
Fixes refrigerator not cooling or freezer not freezing. Complete compressor assembly includes relay and overload. Advanced repair requires technical skill.
Fix a refrigerator that hums and shuts down or won't start with this compressor overload protector. Simple DIY repair that restores safe operation.
Fix temperature control issues and error codes with this PTC thermistor assembly. Restores sensor-based cycles and prevents inconsistent cooling in refrigerators.
Refrigerator not cooling or running intermittently? A cracked relay cover exposes electrical components to damage. Simple 10-minute replacement restores protection.
Freezer too cold while fridge is warm? This damper motor support controls airflow between compartments. Common fix for temperature imbalance issues.
Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.
Water pooling under your refrigerator? This defrost drain tray collects and channels condensation water to prevent leaks and buildup beneath the unit.
Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.
Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.
This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:
Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.
Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.
Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.
Replacement drip tray for refrigerators. Installs under evaporator coils to catch condensation and defrost water. Replace if cracked, warped, or missing.
Fix loud grinding noise or warm freezer with this evaporator fan assembly. Circulates cold air between compartments. 15-minute repair for most DIYers.
Replace your refrigerator's fan grille cover if cracked, broken, or missing. This protective panel installs over the evaporator fan compartment.
Freezer icing up or not defrosting? The defrost sensor monitors temperature during defrost cycles. DIY-friendly repair with basic tools in 30 minutes.
Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.
If your refrigerator is noisy or not cooling evenly, the evaporator fan motor may need replacement. 15-30 minute repair requires freezer panel removal.
Secures and supports the motor assembly in your refrigerator, keeping it aligned and reducing vibration. Replace if cracked, broken, or worn to restore stable mounting.
Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.
Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.
Replacement mounting bracket that secures internal components to the cabinet frame. Needed when original is cracked, bent, or broken, causing loose parts.
Fix frost buildup and uneven cooling in your refrigerator with this evaporator defrost heater. Melts ice from coils during defrost cycles. Moderate repair.
Mounts behind the interior light to direct and spread illumination. Replace if cracked, melted, warped, or missing to restore bright, even lighting.
The Light Bulb is an OEM part for LG refrigerators. It can be used in either the fresh food section or freezer compartment, providing illumination for easy visibility of the stored items.
Causes of a faulty light bulb can include regular wear and tear, reaching the end of its lifespan, or accidental breakage. These factors can result in issues such as a dark or poorly lit interior, making it difficult to see the contents of the refrigerator.
Symptoms of a bad light bulb may include:
This LG OEM bulb is also compatible with Sears/Kenmore models.
Compressor humming but not starting? This start capacitor provides stable starting power to your refrigerator compressor. DIY-friendly repair.
Fix lights that won't turn off or melted fixtures with this light socket assembly. Includes upgraded heat protection to prevent overheating. DIY repair.
Refrigerator not cooling evenly or making loud noises? This evaporator fan motor circulates cold air across coils to maintain consistent temperatures.
Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.
Protects refrigerator light bulbs and sockets from moisture and impacts. Replace if cracked, melted from bulbs staying on, or discolored. Confirm fit.
Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.
Ice maker stopped making ice or won't shut off when bin is full? This assembly automates the fill, freeze, and harvest cycle to restore ice production.
Secures internal components to prevent rattling and shifting. Replace if bracket is damaged, broken, or parts have become loose. Verify fit with model number.
Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.
Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.
Fridge freezing food or not cooling? This temperature sensor monitors internal temps and signals the control board. Fixes ER FF errors. Easy install.
Plastic cover that protects the temperature sensor in your refrigerator. Replace if cracked, broken, or missing to properly shield the sensor component.
Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.
Connects water supply tubes inside your refrigerator. Replace if cracked, leaking, or won't seal properly after disconnecting lines during service.
Plastic water supply tube that connects the main water line to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged.
Water supply tube that connects your refrigerator to the household water line. Replace if cracked, brittle, leaking, or damaged to restore water flow.
Water supply line that connects the valve to the ice maker or dispenser in your refrigerator. Replace if cracked, split, or leaking at connections.
Ice maker not filling or water dispenser stopped working? This water inlet valve controls water flow to both systems. DIY-friendly repair for most users.
Replace a cracked, split, or leaking 1/4" water supply tube in your refrigerator. Connects household water line to dispenser and ice maker system.
Secures bracket assemblies inside your refrigerator to keep components aligned and reduce vibration. Replace if cracked, bent, or missing.
Plastic trim cap that snaps over exposed fasteners and mounting posts on your refrigerator. Replace if cracked, broken, missing, or discolored.
The water filter cover 3550JD1128E attaches over the water filter and protects the water filter and head.
Reduces contaminants and odors from your refrigerator's water and ice supply. Replace every 6 months for optimal performance. Verify fit by model number.
Molded protective housing that shields internal wiring and hoses from wear and debris. Replace if cracked, broken, or missing to maintain safe operation.
Secures internal components in place to prevent rattling and misalignment. Replace if cracked, broken, or missing. Confirm fit with your model number.