Dishwasher Module Dispenser Parts

The Actuator is an OEM part for Whirlpool dishwashers. This actuator is responsible for releasing detergent from the dispenser at the appropriate time during the wash cycle, ensuring effective cleaning of the dishes.

Causes of a bad detergent dispenser actuator can include electrical malfunctions, wear and tear from frequent use, or physical damage to the actuator mechanism.

Symptoms of a bad detergent dispenser actuator include:

• The detergent not dispensing during the wash cycle
• The dispenser door not opening
• Dishes not being cleaned properly due to no detergent release
• Error codes related to the dispenser

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This Control Board is an OEM replacement part for Whirlpool dishwashers. It is an electronic control module that coordinates various functions within the dishwasher. It regulates processes like temperature settings, wash cycles, timing mechanisms, water level and pressure valves.

Causes of a bad control board can include wear and tear over time, exposure to moisture or chemicals, voltage fluctuations, or failure of internal electronic components.

Symptoms of a bad control board include:

• Dishwasher not starting or responding to controls
• Inability to select wash cycles or options
• Error codes appearing or failure to display normally
• Abnormal sounds or vibrations during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Control Board is an OEM part for Frigidaire dishwashers. It is the central component responsible for operating and controlling all functions of the dishwasher. 

Causes of a bad control board can include moisture damage, short circuits, or normal aging of electronic parts over time. 

Symptoms of a bad control board include:

• The dishwasher not starting or functioning properly
• Lights flashing in unintended patterns  
• Inability to select desired wash cycles
• Issues with dispensing detergent or rinse aid

This OEM Frigidaire replacement control board provides genuine functionality and performance. It is also compatible with some Electrolux, Gibson, and Kenmore dishwashers.

The Control Board is an OEM part for Whirlpool dishwashers. This essential electronic component manages and regulates various dishwasher functions, including wash cycles, temperature settings, and timing. 

Over time, the control board can fail due to power surges, electrical shorts, or wear and tear. Exposure to moisture or excessive heat can also damage its electronic components, leading to malfunctions.

Symptoms of a bad control board include:

• The dishwasher not powering on
• Error codes displayed on the control panel
• Unresponsive buttons or controls
• Irregular or incomplete wash cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Electronic Control Board is an OEM part for Whirlpool dishwashers. It manages and regulates the dishwasher's various functions, including the wash cycles, water temperature, and timing.

You should replace the electronic control board if it becomes faulty. Causes of a bad control board can include electrical surges, moisture damage, or wear and tear over time. These factors can lead to malfunctioning or failure of the control board, impacting the dishwasher's performance.

Symptoms of a bad electronic control board include:

• Dishwasher not starting or stopping mid-cycle
• Inconsistent wash cycles
• Error codes displayed on the control panel
• Failure to properly heat water or drain

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Configured Service Machine Control Board is an OEM replacement part for GE dishwashers. It serves as the central control unit, managing and regulating various operations and functions of the dishwasher.

Symptoms of a failing dishwasher service machine control board include:

• The dishwasher not powering on or responding to any input commands
• Incomplete or interrupted wash cycles
• Indicator lights or displays malfunctioning or displaying error codes
• Specific components like the water inlet valve or drain pump not functioning properly

Causes of a bad service machine control board can include electrical malfunctions, power surges or electrical spikes, physical damage from impact or moisture intrusion, or simply wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Control Board is an OEM part for Whirlpool dishwashers. It serves as the brain of the appliance, controlling and regulating all functions and cycles of the dishwasher.

Causes of a bad Control Board can range from power surges or electrical issues that damage the board's components, to physical damage from moisture exposure or impact, as well as general wear and tear over time.

Symptoms of a faulty dishwasher Control Board include:

• The dishwasher not turning on or starting cycles
• Certain wash cycles or options not functioning correctly
• Error codes or indicator lights displaying on the control panel
• The dishwasher shutting off unexpectedly during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Noise Filter Assembly is an OEM part for LG dishwashers. It is designed to reduce electrical noise and interference that can affect the dishwasher's operation. The noise filter helps ensure that the electronic components function smoothly and without disruption, contributing to the overall efficiency and reliability of the appliance.

Causes of a bad noise filter assembly can include electrical surges, wear and tear over time, or damage due to moisture or physical impact.  

Symptoms of a bad noise filter assembly include:

• The dishwasher not starting or stopping unexpectedly
• Error codes related to electrical issues
• Intermittent power loss during a cycle
• Unusual noises coming from the control panel area

This OEM LG part is also compatible with some Kenmore models.

This dishwasher main control board kit is the central circuit board that directs all wash functions. Replacing a failed board restores proper power distribution and timing so cycles start, advance, and finish correctly, helping prevent intermittent shutdowns and erratic operation. What it does:

• Controls cycle timing and communicates with sensors
• Distributes power to the wash motor, drain pump, inlet valve, and heater
• Works with the door latch and user interface to start/stop the cycle
• Failure may cause no power/won't start, stalled cycles, blinking lights/error codes, or incorrect filling, draining, or heating

• One main control board kit

• Disconnect power at the circuit breaker; turn off water if moving the dishwasher for access
• Board is typically in a housing beneath the unit—use ESD precautions and keep connections dry
• Photograph/label wire harnesses; transfer connectors one at a time to the new board
• Restore power and run a test or rinse cycle to proper operation

The Main Control Board Kit is an OEM part for GE dishwashers. This electronic control board manages various dishwasher functions, including water intake, temperature settings, wash cycles, and drying times. It's the brain behind the efficient operation of your dishwasher, ensuring that all components work in harmony for optimal cleaning results.

The primary causes of control board failure often involve power surges, moisture damage, or component wear and tear, which can disrupt the electrical pathways and circuits within the board.  

Symptoms of a bad Main Control Board include:

• Dishwasher failing to start or stopping mid-cycle
• Unusual error codes displayed on the dishwasher panel
• Non-responsive controls or settings that don’t change appropriately

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This door-mounted assembly stores detergent and rinse aid and releases them at the proper time in the wash cycle. Replace a cracked or non-dispensing unit to restore consistent detergent release and overall wash performance. What it does:

• Holds detergent and rinse aid within the inner door
• Releases detergent during the main wash cycle
• Meters rinse aid during the final rinse
• Helps prevent leaks at the dispenser opening
• Common symptoms: detergent left in cup, rinse aid not dispensing, dispenser door won't open, leaks or visible cracks

• One dispenser assembly

• Disconnect power and shut off water supply before servicing
• Remove inner door panel to access and replace the dispenser
• Transfer any reusable seal or hardware from the original part
• After installation, run a short cycle and check for leaks around the dispenser

This rinse aid tank is the reservoir inside the dishwasher dispenser that holds liquid rinse agent and releases it during the final rinse. Replacing a damaged tank helps restore proper dispensing, reduce spotting, and prevent leaks at the dispenser.

• Stores rinse aid within the dispenser assembly
• Works with the dispenser to release a measured dose during the rinse cycle
• Failure signs: rinse aid not dispensing, dishes with spots/poor drying, rinse aid level dropping rapidly, or leaks near the dispenser area
• Visible cracks or damage to the reservoir indicate replacement is needed

• Disconnect power at the breaker and shut off water before servicing
• Remove the inner door panel to access the dispenser
• Transfer any reusable seals or clips from the original tank; seat and secure the tank per service instructions
• Reassemble, refill the reservoir with rinse aid, and run a test cycle to check for leaks

The Dispenser Assembly is an OEM part for Whirlpool dishwashers. It is responsible for dispensing detergent and rinse aid at the appropriate times during the dishwashing cycle, ensuring optimal cleaning and drying performance. The assembly includes compartments for detergent and rinse aid, which are released automatically by the dishwasher.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad Dispenser Assembly include:

• Improper dispensing of detergent or rinse aid
• Insufficient cleaning or rinsing results
• Leaks or drips from the dispenser area
• The dispenser door not opening or closing correctly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This dishwasher control module assembly is the appliance's electronic brain, directing cycle timing and power to the motor, pumps, water valve, and heater. Replace it to restore proper operation when cycles won't start, advance, or the controls are unresponsive.

• Manages cycle timing and coordinates wash, rinse, drain, and dry operations
• Distributes power to key components based on inputs from the user interface and sensors
• Helps resolve issues such as no start/no response, cycles that won't advance or complete, or recurring error codes/beeping
• Restores consistent control of wash performance and cycle sequencing

• Disconnect power at the breaker or unplug the dishwasher before servicing
• Handle the board by the edges and use ESD precautions; avoid touching components
• Move wiring harnesses over one connector at a time to match positions on the new module
• After installation, restore power and run a test/service cycle or control reset per your model's tech sheet

This phase control board is the power module that drives designated surface elements on compatible cooktops. It regulates power and communicates with the main control to deliver steady heat, restoring proper heating performance when the original module fails. What it does:

• Regulates and supplies power to assigned surface heating zones
• Communicates with the main/user interface control to execute heat settings
• Helps monitor fault conditions to protect the circuit
• Typical symptoms: one or more surface elements won't heat, intermittent heating, or the unit powers on but doesn't heat those zones

• One electronic control board

• Disconnect power at the breaker before servicing
• Use ESD protection; avoid touching component leads and solder joints
• On models with multiple phase boards, confirm the correct board position for your unit
• Label and transfer all connectors; secure the board per the service manual and test each surface element after reassembly

This dishwasher user interface mounts behind the door console and translates button presses into commands for the main control. Replacing a failed UI restores responsive keys, cycle selection, and indicator lights when the panel stops responding or behaves intermittently.

• Registers button selections and controls indicator LEDs on the console
• Sends inputs to the electronic control to start and manage wash cycles
• Helps resolve unresponsive or intermittent buttons and non-illuminating status lights
• Common symptoms include no panel response, won't start when Start is pressed, or random/erratic panel behavior

• Disconnect power at the breaker before servicing
• Remove inner-door/console screws to access the interface
• Use ESD precautions; seat ribbon/plug connectors fully and route wiring to avoid pinching
• Transfer any re-usable mounting clips as needed, reassemble, and test operation