Dishwasher Power Snowblower Auger Cable Parts

• Noisy
• Door won't close
• Door latch failure

I finally decided to repair my dishwasher because the door would free fall to the floor possibly breaking the hinges. Also the top shelf was rolling out on its own every time the door was opened. I first pulled the dishwasher out of the enclosure and found that the drain hose was directly under the pump area throwing the unit completely out of level. Also the inadequate plastic and rope counterbalance on the left side was completely broken where the rope was attached to the plastic piece to the... Read more

We knew at least one door hinge cable assembly or hinge spring was broken (the door started falling down rapidly and became heavy to close) so we ordered two of each since we had read to go ahead and replace the damaged items on both sides. While we were waiting on the order, the other side must have broken-the door became incredibly heavy and instead of falling open, started crashing down unless it was carefully lowered. We feared it would fall on one of our animals and kill them. We did not... Read more

Following the very clear and concise Video from AppliancePartsPros.com, I was able to insert the friction pads that had fallen off from the dishwasher door. It now works. The next project may be to replace the rollers of the Dish Rack which are now a little bit worn out. Read more

Found the end of the right-side Door Spring that connects to the Door Cable broke off and the plastic end of the Door Cable that connects to the Door Spring was also broken off. Ordered a replacement Door Spring 154579101 and Door Cable 154578801 from AppliancePartsPros.com When the parts arrived a few days later, I watched the video on the AppliancePartsPros. Following the instructions on the video, it took about 15 minutes to replace the Door Spring and Door Cable. Note: I did not have... Read more

I watched the repair video and ordered the part ( I luckily ordered two links). The video was not exactly for my model dishwasher but I did follow the instruction for removal from the cabinet. Since my model was not shown, I was looking to see how the door spring and the Hinge Arm Link was supposed to be set up. I had the impression that the door spring and link was only on the right side of the dishwasher. I finally figured it out and took pictures of the set-up for the next time the link... Read more

I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros. Read more

Replaced broken part. Read more

At first it seems that the pulley can't be removed to make this repair. However,after removing the screw that holds the pulley in place, if you take a small screwdriver and tap the center of the pulley bracket with a hammer it comes out from behind and will go back in with hand pressure after repair. Read more

I looked online and found a number of repair videos. The one from AppliancePartsPros was the most clear. I initially went to Amazon to get the part but the delivery on it was unacceptable. I googled the part and found AppliancePartsPros. It was cheaper than Amazon and arrived MUCH more quickly. When it came time to do the repair, we watched the video again. The repair went VERY smoothly! Read more

Checked out the AppliancePartsPros.com online parts/assembly diagrams for our Bosch dishwasher model and ordered the two sided set of new springs + connector ropes + connector-to-door ... plus a couple of other relatively inexpensive adjoining parts that might have become worn over time, just in case they were needed. The extra parts arrived in two days with standard shipping. Called about the "back ordered" primary set of parts (which had been listed as being "in stock" when I placed the... Read more

My first thought was to take the dishwasher to the dump when I saw the pack rats ate the wiring while it was in storage. However, it was only a couple years old so just out of curiosity I looked at the appliance parts pros website and was pleasantly surprised that I could replace every wiring harness on my GE dishwasher for under $100. That is a lot of wire. The process to replace the wiring was nearly effortless. The new harnesses were identical to the old so all I had to do was find the 2... Read more

My husband took the door apart replaced hinges in less than 15 minutes. Very easy to do yourself rather then paying a lot of money for someone to come out to do it for you. I would have to say that the customer service was very helpful told me exactly what I needed. Read more

The door cables attach to springs that help the user open/close the dishwasher door. I attached the new door cables to the springs then attached springs to the intended mounting locations on the door. However, the new cables were shorter than the originals. This created enough tension in the springs to cause the door to close by itself. I was forced to change the springs' mounting locations. Fortunately, I was able to attach the springs to cut-outs in the door that reduced spring tension. ... Read more

I first wanted to get the dishwasher running, before ordering the spring links. So I disassembled the pump / motor assembly to determine the reason the motor would not start. My wife cleaned all of the parts in the pump assembly. I took the motor apart and discovered that the lower bearing ( a sleeve type bearing) was dry and dirty, and was the culprit for the motor seizing. I cleaned up the bearing and lubricated it with SAE 20W. I also packed felt inside the cavity adjacent to the bearing.... Read more

• Door latch failure

First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then... Read more

Normally when you let go of the dishwasher door partly open it would stay in that position. But lately when you let go of the door it would fall to the fully open position. Turns out this little cable was broken one one side. Just puss the dishwasher slightly out of the cabinet and you can replace the cable in minutes. It is just held in place with a spring. Read more