Washer Waste Line Mover Traction Control Cable Parts

This mechanical timer sequences the dishwasher through its wash, drain, and dry steps. Replacing a failing timer restores proper cycle advancement so the dishwasher starts, progresses, and finishes cycles reliably. What it does:

• Times and sequences power to the wash motor, drain pump, fill valve, and heater for each stage of the cycle
• Advances the cycle automatically and moves the dial/indicator through programmed steps
• Coordinates wash, rinse, and dry durations for consistent results
• Typical failure symptoms: cycle won't advance or stops mid-cycle; runs too long; must be advanced manually; timer knob won't turn

• 1 mechanical timer assembly

• Disconnect power at the breaker before servicing; do not rely on the control panel to turn the unit off
• Access the timer from the control console/inner door; remove screws to reach the component
• Photograph/label wire positions and transfer leads to the new timer one at a time
• Reuse existing mounting hardware and knob; ensure the shaft orientation matches before reassembly

The Washer Timer is an OEM part for Frigidaire washing machines. It controls the sequence of operations in the washing machine, including filling, washing, rinsing, and spinning. By managing the timing of these cycles, the timer ensures the washer operates efficiently and effectively.

Causes of a bad washer timer can include electrical malfunctions, wear and tear from regular use, or physical damage to the timer mechanism. Power surges, exposure to moisture, and accidental impacts can also lead to timer failure.

Symptoms of a bad Washer Timer include:

• Washer not advancing through cycles
• Machine getting stuck on a single cycle
• Incorrect timing for washing, rinsing, or spinning
• Washer not starting or completing a cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This mechanical timer controls the sequence and duration of cycles in your washer. Replacing a worn timer restores dependable cycle advancement and consistent operation from fill through spin.

• Selects and times each cycle by routing power to the motor, pump, and water valves in the correct order
• Automatically advances through wash, rinse, and spin
• Helps resolve symptoms such as: cycle won't start or advance, stops mid-cycle or runs too long, or a timer knob that doesn't move/only advances intermittently

• Unplug the appliance before servicing
• Open the control console; remove the knob/dial and any retaining hardware
• Label or photograph wire positions; transfer connectors one at a time to matching terminals on the new timer
• Align the timer shaft, secure the mounting, and test a short cycle before full reassembly

This motor control board is created for use with washing machines. It's located inside the washing machine, where users can change settings and start or stop the appliance. It is tasked with regulating how quickly the washer spins during a cycle. Wear and tear or damage can cause the motor control board to malfunction. This may make it impossible for the washer to agitate or spin. If this happens, a replacement will need to be made.To replace this part, start by unplugging the appliance. Once the area is safe, the bottom front panel should be removed. This will provide access to the original motor control board. Pull on the motor control board until the wires can be reached. The position of these components should be noted before taking out the part. Replace with a new motor control board and replace the wires.This motor control board is designed to fit washing machines made by Maytag, Whirlpool, Kenmore, and KitchenAid. This is an authentic OEM replacement part that is sourced directly from the manufacturer. It's sold as a single part.

This electronic control board manages the appliance's core operations by interpreting inputs and switching power to components. Replacing a failed board restores proper control of cycles and functions when the unit is unresponsive or behaving erratically.

• Coordinates cycle timing and operation based on signals from sensors and the user interface
• Switches power to loads via onboard relays/triacs
• Monitors for faults and stores/displays error codes for diagnostics
• Failure symptoms can include: won't start, no response at controls, cycle won't advance, intermittent operation, or recurring error codes

• Disconnect power before servicing; follow all safety and ESD precautions
• Photograph/label connectors; transfer wiring one at a time to the new board and secure with existing hardware
• Restore power and perform any model-specific diagnostics, resets, or calibrations per the tech sheet/service manual

This is a Whirlpool drive motor control board, or MCU, for washing machines. It monitors and controls the speed and direction of the drive motor. If this board fails, the washer likey will not work, and the display may show an error code like F70.Before installing this part, be sure to cut power to the appliance and allow it to drain, cool, and dry completely. The washer will need to be pulled away from any walls to properly access the control panel. After opening the panel, remove any mounting screws or wire harnesses connecting the old drive motor control board and install the new one in its place.This is a genuine OEM part compatible with washers manufactured by Whirlpool brands, including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product contains no additional parts or hardware.

This genuine OEM part is a timer for washers. The timer is the part that allows the washer to start and stop after being in use for a amount of time. The settings of the timer are controlled by the user and adjusts automatically depending on the desired settings. If the washer is no longer stopping after the desired time has elapsed, the timer might need to be replaced. To replace the timer, start by making sure the washer is unplugged. After that, pull the washer away from the wall to access the back panel. Once accessed, remove the screws that attach to the back panel and locate the timer. Once found, remove the mounting screws that hold it in place. Proceed to pull the timer out of the washer and replace it with the new part. This replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand washing machines.

The Timer is an OEM part for Whirlpool washing machines. It controls the sequence of the wash cycles by regulating the various operations, such as filling, agitating, rinsing, and spinning, at the correct times.  

Common causes of a faulty timer include electrical issues, wear and tear from extended use, or damage from moisture and corrosion.

Symptoms of a bad timer include:

• The washing machine not advancing through cycles
• The machine getting stuck on a specific part of the cycle
• The timer knob not moving or advancing properly
• The washer stopping mid-cycle or not starting at all

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Washing Machine Control Board Assembly is essential for maintaining the functionality of your Samsung washer. This main PCB assembly ensures precise control over your washing cycles, providing reliable performance every time. Designed as a genuine OEM part, it guarantees compatibility and seamless integration with your Samsung appliance. By replacing a faulty control board with this high-quality assembly, you can restore your washerGÇÖs operations without the need for a complete replacement. Key features include durable circuitry that withstands regular use and accurate signal processing for efficient washing. Installing this control board assembly can help prevent errors and improve the overall efficiency of your washing machine. Whether your washer is experiencing cycle interruptions, display issues, or other electronic malfunctions, the Washing Machine Control Board Assembly offers a dependable solution. Trust in genuine OEM parts to extend the life of your Samsung washer and ensure optimal performance.

This timer is the appliance's cycle controller. It routes power to the right components in a programmed sequence and advances the cycle at the correct intervals, restoring proper progression and reliable start/stop of functions when the original fails.

• Advances the machine through each step and duration selected
• Opens and closes internal contacts to power motors, heaters, and valves as designed
• Interfaces with the control knob/shaft for user-selected settings
• Common symptoms: cycle won't advance, timer doesn't move, stuck mid-cycle, or runs indefinitely

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Note wire locations and transfer one wire at a time to the matching terminals on the new timer
• Reuse existing mounting hardware and control knob/shaft parts as applicable
• After installation, run a short test cycle to confirm the timer advances correctly

The Electronic Control Board is an OEM part for Whirlpool washing machines. It manages and regulates the washer's functions, including the wash cycles, water levels, and temperature settings. The control board ensures that the washer operates efficiently and correctly by processing user inputs and coordinating various components.

Causes of a bad electronic control board can include electrical surges, moisture damage, or component wear over time.

Symptoms of a bad electronic control board include:

• Washer not starting or completing cycles
• Displaying error codes
• Inconsistent or incorrect wash cycles
• Unresponsive control panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This washer timer controls the sequence and duration of wash, rinse, drain, and spin cycles. Replacing a worn timer restores proper cycle advancement and consistent performance when the machine stalls, skips steps, or runs unpredictably.

• Sequences power to the motor, pump, and water valves to run each stage of the cycle
• Advances through timed contacts to start and stop functions at the right time
• Common symptoms: cycle won't advance or stops mid-cycle; washer won't start
• Runs too long or too short; skips or repeats steps
• No drain or spin; timer knob doesn't move or shaft slips

• Disconnect power before servicing; turn off water if moving the appliance
• Open the control console to access the timer; remove rear cover as needed
• Note wire positions; transfer connectors one at a time or photograph for reference
• Secure the new timer, reinstall dial/knob if applicable, reassemble, and test a full cycle

The Timer is an OEM part for GE washing machines. This part controls the various cycles of the washing machine, including wash, rinse, and spin, by regulating the duration and sequence of operations.

Causes of a bad timer can include wear and tear over time, electrical issues such as short circuits or power surges, and mechanical failures within the timer mechanism.

Symptoms of a bad timer include:

• The washing machine not advancing through cycles
• The machine stopping mid-cycle
• Inconsistent or incorrect cycle durations
• The machine not starting at all

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This mechanical cycle timer regulates the sequence and duration of the washer's programs. Replacing a worn timer restores proper cycle advancement, helping the machine start, progress, and complete wash, rinse, and spin stages as designed.

• Sequences power to the drive motor, pump, and water valves through each stage of the cycle
• Advances the internal cam and contacts to move the washer from wash to rinse to spin
• Helps with: cycle not advancing or stopping mid-cycle; won't start on certain settings; no agitate or no spin in selected cycles; knob won't turn or feels loose
• Mounts in the control console and interfaces with the cycle knob

• Unplug the washer before servicing
• Open the control console; remove the knob/dial and the timer's mounting hardware
• Photograph or label wiring; transfer leads to the new timer one at a time to matching terminals
• Reassemble, ensure the knob indexes correctly, and run a test cycle

This noise filter assembly conditions incoming AC power to reduce electromagnetic interference before it reaches the control system. A failed line filter can cause no power, intermittent shutdowns, or breaker trips; replacing restores stable, reliable operation. What it does:

• Filters EMI/RFI on the power line to help protect sensitive control electronics
• Helps prevent interference that can cause no power, flickering display, or random resets
• A failing filter may trip a breaker/GFCI when the unit is plugged in or starts a cycle
• Visual clues can include scorch marks, burnt odor, or a cracked/bulged filter body

• 1 noise filter assembly

• Disconnect power before servicing; verify the outlet is de-energized
• Access is typically near the power cord entry behind a rear/top panel (varies by model)
• Label or photograph wire positions and transfer connections one by one; secure the ground
• Mount firmly and route wires to avoid pinching; reassemble and test for proper operation

• Line filter, EMI filter, RFI filter

The Coin Slide Interface is an OEM part for Whirlpool commercial washers. It is a component that allows users to insert coins or tokens to activate the machine and initiate the laundry cycle.

Causes of a faulty coin slide interface can include regular wear and tear, damage due to misuse or vandalism, or electrical component failure. These factors can result in issues such as coin rejection, incorrect coin counting, or the inability to start the machine using coins.

Symptoms of a Bad Part:

• Will not start
• Not washing properly
• Timer will not set

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.