Washer Control Panel Lcd Parts

This control board is the appliance's primary printed circuit board. It governs cycle timing, options, and power to key components. Replacing a failed PCB can restore responsive controls and consistent operation across all cycles.

• Coordinates inputs from sensors/controls and directs outputs to motors, valves, pumps, and other loads
• Manages cycle sequencing and option selections as designed by the manufacturer
• Symptoms of a failing board can include no start/no response, cycles that won't advance or end early, intermittent/erratic operation, blank or flickering indicators, or recurring error codes

• Disconnect power before servicing; do not work on a live appliance
• Use ESD protection and handle the board by the edges to avoid damage
• Photograph existing wiring; move connectors one at a time to the matching positions on the new board
• Secure the board and any covers before restoring power; run a test cycle/diagnostic per your model's service information

This coin chute guides coins from the slide into the coin mechanism so the machine can register payment and begin a cycle. Keeping the chute intact and aligned helps prevent jams and misfeeds in coin-operated laundry equipment.

• Directs coins from the slide to the coin mechanism to register payment
• Helps ensure smooth coin drop, reducing bounce-back and misfeeds
• Common fix when coins jam, fall into the cabinet, or the unit won't start after payment
• Replace if cracked, bent, corroded, or missing

• Disconnect power; shut off gas before service
• Open the coin housing/slide assembly and retain existing hardware
• Install the new chute in the same orientation; align with slide and mechanism, then secure
• Test with sample coins to ensure proper drop and operation before returning to service

This is a washing machine timer. This part controls the electrical components and the duration of the unit's cycles.If the washing machine unit will not run through the drain or spin cycles, it is possible that the timer has gone bad and will need to be replaced. Some users report the washing machine running through the washing cycle fine until it is time to drain or spin. The replacement steps are fairly easy and can be done quickly. Be sure to unplug the washing machine from its power source before starting the replacement process. Some people may wish to wear work gloves during this process to protect their hands from scratches or other injuries.This specific timer is compatible with washing machines that are manufactured by the Whirlpool brand. It is sourced right from the manufacturer as a high-quality and durable part. It is sold individually.

Restore accurate cycle control with this washer timer. It sequences power to the drive motor, pump, and water inlet valves so the machine fills, washes, drains, and spins at the proper times.

• Advances the cycle through fill, wash, rinse, drain, and spin stages
• Sends power to the motor, pump, and inlet valves in the correct order and duration
• Safe symptoms: washer won't start, won't advance, stops mid-cycle, runs indefinitely, or skips rinse/spin
• Helps when cycles stall or the dial turns without moving the cycle forward

• Unplug the washer before servicing
• Open the control console to access the timer; note or photograph wiring
• Transfer wires one at a time to matching terminals on the new timer
• Reuse your existing knob/dial and mounting hardware; align the timer shaft before tightening

The Timer is an OEM part for SpeedQueen washing machines. It controls the duration of the wash cycles, ensuring each phase of the cycle is completed in the correct sequence. This includes washing, rinsing, and spinning, providing precise control over the washing process for optimal results.

Over time, the timer can become faulty due to electrical issues, wear and tear from repeated use, or internal component failures. When the timer malfunctions, it can disrupt the washing machine's ability to complete cycles correctly.

Symptoms of a bad timer include:

• The washer not advancing through cycles
• Cycles that are too long or too short
• The machine stopping mid-cycle
• Inconsistent or erratic timing of cycle phases

This OEM part ensures reliable performance and compatibility with SpeedQueen washing machines.

This replacement timer is made by Frigidaire and is compatible with commercial washers.This timer controls the internal components that monitor the duration of the cycles. If the user notices that the laundry center cycles are not running for the correct amount of time or do not start at all, the timer may need to be tested for continuity and then replaced. Make sure to entirely disconnect the appliance from the power and water sources and wear work gloves before attempting any repairs or replacements. This is an authentic OEM part made of high-quality, durable, non-corrosive materials and is only sold individually. This timer can be used with washers that have been manufactured by Frigidaire, Kenmore, Electrolux, Gibson, Kelvinator, Westinghouse, and some other brands.

This electronic control board is the appliance's main control, coordinating cycle selection, timing, and power to key components. Replacing a failed board restores proper operation when the console is dead, unresponsive, or cycles behave erratically. What it does:

• Interprets user inputs and governs cycle logic and timing
• Energizes relays to power motors, valves, and other loads
• Monitors sensors/switches and stores error codes for diagnostics
• Failure symptoms can include a dead or intermittent console, won't start, won't advance/stops mid-cycle, or erratic behavior

• 1 electronic control board

• Disconnect power before servicing; electrical shock risk
• Use ESD precautions; handle the PCB by the edges only
• Photograph/label connectors and transfer wiring/mounting from the original board
• On some models, complete any required configuration per the service/tech sheet after installation

This replacement part is a control board for washers. The control board is the main computer that sends signals to the washer to perform its essential functions. Over time a control board can become inoperable after excessive use. If the washer is no longer turning on, spinning, rinsing or draining properly, this could mean that the control board needs to be replaced. Luckily this is not a difficult repair.Start by shutting off all power to the appliance. Remove the upper back panel and locate the old control board. Pull it out of its mounted position and take note of the orientation of the wires attached to the old board. Reinsert the wire harness and individual wires into their correct terminals on the new board. Snap the board back into its original place and reinstall the upper back panel.This genuine OEM replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand refrigerators.

This timer restores the appliance's original timekeeping function. It allows you to set and track a time interval and, per the design of your unit, will advance contacts and/or provide an end-of-time alert for consistent results.

• Provides a settable countdown per the appliance's design
• Advances internal timing contacts or triggers an alert when time expires
• Helps restore accurate timing for cooking or cycle tasks
• Common symptoms: timer won't advance, runs fast/slow, no end-of-time signal (if equipped), hard to set or slips

• Disconnect power at the breaker or unplug before servicing
• Access the control panel; photograph wiring and transfer one wire at a time to the new timer
• Reuse any mounting brackets/screws from the original part as required
• After installation, restore power and verify timing and alert functions

This is a washing machine timer manufactured by Whirlpool.The timer controls the duration of the selected washer cycles by controlling electrical components within the washing machine. Timers are subject to wear and tear or deterioration over time, which might cause the user to notice longer or shorter washing machine cycles than usual. Unplug the washing machine from power and disconnect it from the water source before attempting to replace the timer. Work gloves can be worn to prevent the risk of injury to the hands. This is an authentic OEM part and, as such, is sold individually and made from durable, high-quality, non-corrosive materials to ensure high quality. This timer is compatible with different washing machines manufactured by Whirlpool, Maytag, Jenn-Air, Amana, and other brands.

Note: Control may no longer include the housing.

This washer main control board, also called the electronic control, runs the selected cycle and coordinates the motor, filling, draining, and spinning. Replacing a failed board restores proper operation and returns responsive, reliable control of the washer.

• Controls the timing and sequence of wash, rinse, and spin cycles
• Sends power to the drive motor, water inlet valves, and drain pump as needed
• Interprets inputs from the user interface and safety interlocks to run the chosen program
• Failure symptoms can include the washer not starting or accepting inputs, cycles that won't advance, no spin/agitation, or a dead/intermittent console

• Disconnect power before servicing; verify power is off with a meter
• Handle the board by its edges and protect against static discharge; photograph wiring for reference
• Match each connector by position and orientation; secure the board in the original mounts
• After installation, perform a control reset or run the model's diagnostic/calibration as directed in the service information

This control panel manufactured by Whirlpool is intended to replace a worn or faulty part in washing machines.The control panel houses all of the buttons, dials, and the display, which allows the user to select the desired washer settings. If the panel is worn, detached, malfunctioning, or otherwise broken, it will need to be immediately replaced to ensure the washing machine can be properly controlled. To make sure that no injuries occur, work gloves should be worn and the washing machine should be completely disconnected from the power and water sources.This is a genuine OEM part sourced from the manufacturer and is compatible with certain washers that have been made by Whirlpool, Maytag, Amana, Admiral, and other brands. This part has been manufactured from high-quality, durable, non-corrosive plastic to ensure the best possible quality and is only sold individually.

This washer timer is the mechanical cycle controller that sequences power to the motor, pump, and water valves. Replacing a worn timer restores proper cycle advancement so the washer starts, progresses, and stops at the correct times.

• Controls the length and order of wash, rinse, and spin cycles
• Directs power to the drive motor, drain pump, and inlet valves as the cam advances
• Advances the cycle automatically; interfaces with the timer knob for manual selection
• Failure symptoms include cycles not advancing, stopping mid-cycle, skipping steps, or no start

• Disconnect power and turn off water supply before servicing
• Access the control panel; remove the knob/dial and mounting screws to release the timer
• Note wire positions or take a photo; transfer connectors one at a time to matching terminals
• Reinstall, secure the timer, and run a short test cycle to ensure proper advancement

This timer is the mechanical cycle controller for select top-load washers. It sequences power to the motor, water inlet valves, and drain pump so each step runs in the correct order and duration for consistent, reliable operation.

• Directs power to advance the washer through fill, wash/agitate, drain, and spin
• Restores proper cycle advancement when the washer stalls or skips steps
• Helps resolve symptoms like stopping mid-cycle or running indefinitely
• Can correct intermittent or erratic cycle timing/advancement issues

• Disconnect power before servicing; access the timer from the control console
• Transfer wires from the old timer to the new one, moving one connection at a time
• Reuse existing mounting hardware and control knob/dial as applicable
• Handle sharp cabinet edges and verify dial alignment before reassembly

This part is a washing machine timer. This is the component that controls the washing machine functions and the length of time for each of the cycles. Signs that the timer has gone bad can vary. For example, the washing machine may only wash but will not spin or drain. It might skip cycles or stall mid-cycle. The washing machine could become stuck on a cycle also. If this is happening, the repair person can check for continuity through the timer motor by using a multimeter. If it measures infinite resistance, the timer will need to be replaced. Unplug the washing machine from the wall before trying to replace this part. The person performing the replacement procedure should wear work gloves for safety during the process.This timer is compatible with washing machines that are manufactured by Kenmore and Whirlpool. It is sold individually. This part comes directly from the manufacturer.