Washer Lid Lock Switch Parts

This backsplash assembly is the rear console housing for a washer's controls. It supports and protects the user interface components and finishes the top, restoring a secure, aligned control area when the original panel is cracked or loose.

• Houses and supports the washer's control components and mounting hardware
• Shields wiring and controls from splashes at the rear of the top panel
• Restores proper fit and alignment for knobs, buttons, and overlays
• Common symptoms: cracked or broken console, loose or rattling controls, broken mounting tabs, cosmetic damage

• Disconnect power and, turn off water supply before servicing
• Remove control knobs and screws/clips securing the console; carefully lift the assembly
• Label or photograph wiring and transfer controls/mounting hardware to the new panel
• Reinstall, ensuring all tabs and screws are fully seated; watch for sharp edges

This rotary encoder mounts behind the washer's cycle knob and tells the main control which setting you select. When it fails, selections may be erratic or unresponsive. Replacing it restores accurate, dependable cycle selection. What it does

• Detects the position of the cycle selector knob
• Sends selection signals to the main control board
• Enables precise cycle and option changes
• Common symptoms: knob turns but lights don't follow, random/incorrect selection, can't select a cycle, won't start

• One rotary encoder

• Disconnect power to the washer before servicing
• Access the control console and remove the knob/dial to reach the encoder
• Note orientation, unplug the harness, release tabs/screws, and swap in the new encoder
• Handle electronics carefully and avoid static discharge; verify knob-to-light tracking before reassembly

This in the male piece on the front panel. For the female piece on the door order WPW10111905.

The Washer Lid Strike is an OEM part for Whirlpool washing machines. It is a metal bracket that secures the washer lid in a closed position during cycles. The lid strike has a spring-loaded arm that catches the lid tab, providing a tight seal and secure closure. 

Causes of a bad lid strike can include normal wear and tear over many cycles, damage from repeated impact or mishandling of the lid, or deterioration of components like the springs.

Symptoms of a defective lid strike include:

• The washer lid not latching properly or staying securely closed  
• Water leaks around the lid seam
• Error codes related to the lid not locking
• Difficulty opening the lid fully after cycles  

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washers. 

The Switch is an OEM component specifically designed for Frigidaire washing machines. It controls various cycle options like water temperature levels, spin speeds, and additional settings like stain removal cycles.

Causes of a bad switch can include water or chemical damage leading to component failure over time, or loose wiring connections causing intermittent issues.  

Symptoms of a bad switch include: 

• Inability to select wash cycles or adjust settings  
• Unresponsive or inaccurate temperature levels
• Lights/displays not functioning as normal
• Error codes indicating switch problems

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace yours today to avoid expensive repairs down the road.
 

This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.

• Provides precise resistance to reduce voltage/current in the designated dryer circuit
• Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
• Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
• Replace if visibly burned/damaged or if testing shows an open or shorted condition

• Disconnect power to the appliance before servicing
• Access the console/wiring harness and note original wire routing
• Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
• After installation, run a test cycle to ensure proper operation of the affected function

This door lever actuates the latch/switch when the door closes. If it's worn or broken, the appliance may not sense a closed door and won't start. Replacing it restores proper door engagement and safe, reliable operation. What it does:

• Engages the door latch/switch mechanism so the control knows the door is closed
• Helps ensure the unit only runs with the door fully shut
• Replaces cracked, bent, or missing levers that prevent proper door sensing
• Common symptoms: won't start, must hold/push door to run, "door open" indicator stays on

• 1 door lever

• Disconnect power before servicing
• Access the latch/switch area; note the original lever's orientation and any spring
• Transfer and reuse existing hardware if needed; install the new lever in the same position
• Close the door and test for proper start/stop operation

This washer water level pressure switch senses air pressure from the tub and signals the control to stop the fill at the correct point, helping prevent overfilling and ensuring each cycle uses the right amount of water. What it does:

• Monitors tub water level via the air dome hose and internal diaphragm
• Sends signals to the control to open/close the inlet valves during fill
• Helps match water level to the selected or programmed setting
• Failure symptoms include overfilling/overflow, continuous filling, low or no fill, or cycles not advancing from the fill stage

• One pressure switch

• Disconnect power and turn off the water supply before servicing
• Access the console/control area; note wire and hose positions before removal
• Transfer the air tube and wiring to the new switch; seat the tube fully and ensure it isn't kinked, cracked, or clogged
• Reassemble and run a quick fill test to ensure the valve shuts off at the proper level

This water-level pressure switch monitors tub fill and signals the control to shut off the inlet valves and advance the cycle. Replacing a failed switch restores accurate filling and helps prevent overfilling or cycle stalls. What it does:

• Senses air pressure from the tub via the pressure hose to determine water level
• Signals the timer/control to stop filling when the set level is reached
• Enables the transition from fill to wash and subsequent cycles
• Common failure symptoms include continuous filling or overfilling, no fill, failure to advance from fill to wash, or water-level/pressure switch error codes

• 1 pressure switch

• Disconnect power and turn off water supply before servicing
• Note wire locations and transfer connectors one at a time to the new switch
• Move the existing pressure hose to the new switch; ensure an airtight, kink-free connection and inspect the hose for cracks or blockages
• Mount securely and run a test fill to ensure proper shutoff before normal use

This washer lid switch signals that the lid is closed so the cycle can run. A failed switch can keep the washer from starting or spinning. Replacing it restores safe operation and consistent cycle performance.

• Senses lid position and enables operation only when the lid is closed
• Interrupts spin when the lid opens to meet safety interlock requirements
• Typical symptoms: washer won't start, won't spin, or stops when the lid is bumped
• Intermittent operation that improves when pressing or holding the lid closed

• Disconnect power before servicing; allow moving parts to stop completely
• Access the switch from the top/console area as directed for your model; note wire-harness orientation
• Secure the switch and ensure the lid strike aligns properly with the actuator
• After reassembly, run a spin test with the lid closed to verify operation

This dryer temperature selector switch lets you choose between four heat settings for proper fabric care. Replacing a worn switch restores accurate temperature selection so loads dry evenly without overdrying delicate items.

• Controls the dryer's heat level across four selectable settings
• Faulty switch can cause incorrect temperatures or only one setting to work
• May lead to poor drying performance or fabric damage if not functioning
• Restores reliable temperature selection and consistent drying results

• Unplug dryer before servicing; shut off gas if applicable
• Pull control knob straight off to access the switch
• Transfer wires one at a time to the new switch to maintain correct positions
• Ensure switch shaft and flat align with the knob during reassembly

A replacement lid lock striker for top-load washers that engages the lid lock assembly so the washer lid stays securely closed during cycles. Restores safe lid latching and reliable cycle operation when the striker is worn or damaged. What it does:

• Engages with the washer's lid lock to hold the lid closed during wash and spin cycles.
• Prevents the lid from popping open mid-cycle and related cycle-interruption symptoms.
• Helps maintain proper lid alignment to reduce rattling and uneven lid movement.
• Commonly replaced when the lid won't latch, the washer won't start, or the lid rubs against the cabinet.

• Disconnect power to the appliance before attempting any service.
• Access and replacement typically require removing or opening the washer top or access panel; use basic hand tools.
• Align the striker with the lid lock mechanism and secure fasteners snugly; verify smooth engagement before final reassembly.
• If the mating lid lock assembly is damaged or worn, replace the lock and striker as needed for reliable operation.

This replacement switch restores reliable on/off control for the specific function it serves in your appliance. A failing switch can cause that feature to stop responding or behave intermittently; replacing it brings normal operation back.

• Opens and closes the electrical circuit to the associated component when actuated
• Provides consistent, safe control of the feature it operates
• Typical failure symptoms: function won't turn on, won't turn off, or works only intermittently
• Physical clues can include a loose or sticky actuator, heat discoloration, or visible arcing damage

• Disconnect power at the breaker before servicing; allow hot surfaces to cool
• Access the switch per your model's service/parts diagram and note wire positions
• Transfer wires one at a time to the new switch; secure any mounting hardware
• Verify continuity and test operation before reassembly; replace any damaged connectors

This door switch detects whether the appliance door is open or closed. A working switch lets the machine start when the door is fully shut and stops operation when the door opens for safety.

• Monitors door position and allows the cycle to run only when closed
• Interrupts power to stop operation when the door opens
• Common symptoms of a failing switch: appliance won't start with the door closed, must press/hold the door to run, interior light stuck on/off, or a "door open" message on models with a display

• Disconnect power to the appliance before servicing
• Access the switch at the door opening/front panel; release mounting screws or locking tabs and remove the switch
• Move wires to the new switch one at a time to maintain correct positions
• After reassembly, test switch operation before running a cycle

This control panel manufactured by Whirlpool is intended to replace a worn or faulty part in washing machines.The control panel houses all of the buttons, dials, and the display, which allows the user to select the desired washer settings. If the panel is worn, detached, malfunctioning, or otherwise broken, it will need to be immediately replaced to ensure the washing machine can be properly controlled. To make sure that no injuries occur, work gloves should be worn and the washing machine should be completely disconnected from the power and water sources.This is a genuine OEM part sourced from the manufacturer and is compatible with certain washers that have been made by Whirlpool, Maytag, Amana, Admiral, and other brands. This part has been manufactured from high-quality, durable, non-corrosive plastic to ensure the best possible quality and is only sold individually.

This lid switch actuator engages the washer's safety switch when the lid is closed so cycles can start and spin as designed. Replace a broken or missing actuator to restore proper lid switch engagement and reliable operation.

• Engages the lid switch when the lid is closed to enable agitation and spin
• A worn, cracked, or missing actuator can cause the washer not to start or to stop before spin
• Intermittent operation that changes when pressing on the lid often indicates misalignment
• Lack of an audible "click" from the lid switch can point to a faulty actuator or alignment

• Disconnect power before servicing; do not work on a live appliance
• Access the lid/switch area per your model's service procedure
• Remove the damaged actuator and install the new part, securing as designed
• Before reassembly, close the lid to ensure the switch clicks and engages properly