Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Service Machine Control is an OEM component specifically designed for GE dishwashers. As the main control board, it regulates all wash cycles including temperature, filtration, spray arm rotation, drying functions and end of cycle signals. Causes of a faulty service machine control include normal wear and tear over time. Electronic failures or water exposure from plumbing issues can also trigger malfunctions. Symptoms of a failing control board are:
Replacing it with this genuine GE OEM part restores optimal cycle handling. Proper controls are essential for sanitizing every wash. The part is also compatible with Hotpoint, RCA and some Kenmore models.
Indicator light would blink three times, make a sound, but the dishwasher would not run. After making sure there were no obstructions, no problems with seals, filters, and latch clean, I cut the power off and back on. The Dishwasher worked for a few more times. After that, cutting the power off and on no longer worked. I figured out what buttons to press and hold to find the error code (start/stop and cycle select), saw code 815, and then did a "hard reset" by pressing and holding other... Read more
Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This latch assembly secures the door and activates switches. 5-10 min fix.
After I double checked that the unit did have power to it, I concluded it was probably a switch or the User Interface Board. I found the parts on the AppliancePartsPros for the best price and delivery. After the parts were delivered two days later, it took me a couple hours to disassemble and re-assemble the door for the dishwasher and luckily everything seems to be working fine three days and three loads later. The only issue I had was with the User Interface board..... this is a generic... Read more
Dishes not drying or staying wet after cycle? This heating element heats water during wash and dries dishes after rinse. DIY-friendly replacement part.
I followed the directions on several websites for repairs. The obvious place to start is the heating coil and thermostat. I checked the continuity of the coil and it was good with a reading of almost zero resistance. Next I read that there is no thermostat controls on my GE dishwasher so I followed another webpage that said the Sensor Turbidity Assembly acts like a thermostat so I replaced that. Wasted effort as that switch sensor was OK. Normally it has a light on when it is working, a... Read more
Dishwasher won't drain or leaves standing water? This drain pump kit removes water at cycle end. Common DIY repair taking 15-30 minutes with basic tools.
I viewed youtube videos and followed the instructions on how to determine the cause of the problem. I cleared the lines and poked my fingers in to check for obstructions. But in the end, the drain pump was the problem. The pump came in the mail the next day. The job required the pump and only one of the hose clamps as the original setup has one single ear clamp which can be removed with wire cutters and a standard one which I re-used. There is a wire adapter in the kit that is necessary to... Read more
Replaces broken or worn lower rack carriers and rollers. Installs on both sides of the dishwasher lower rack to restore smooth gliding along tracks.
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix! Read more
Seals the dishwasher tub opening to prevent water leaks during wash cycles. Replace if worn, flattened, or causing leaks. Verify fit with your model.
Upon taking the door apart it looked like the leak was coming from the vent so I replaced the vent cap, vent seal and the transition piece. I did not have to change the seals. It took me a while to figure out how to get the door apart, but once I did, it was fairly straightforward. Read more
The User Interface Control Board is an OEM part for GE dishwashers. It serves as the main control panel, allowing users to select and monitor various wash cycles and settings. This control board interfaces with the dishwasher's electronic system to ensure proper operation.
Causes of a bad control board can include electrical issues, exposure to moisture, or general wear and tear over time. Damage to the circuitry or components can also impair its functionality.
Symptoms of a bad user interface control board include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The control went thru a month or so of erratic behavior; the display would come on and flash and beep without any input on my part. Then it died completely. I did a little research on the GE website and determined likely cause waa a defective user interface board. I found AppliancePartsPros.com and contacted their tech support, who directed me to check the output of the control board across 2 pins for 13.5v DC. I did this, and measured 13.8v, so control board was good. When I reconnected the... Read more
Fix dishwasher leaks with a new diverter valve assembly. Controls water flow to spray arms. Common repair for water pooling under unit. DIY-friendly.
Needed to replace diverter valve. Since you can't get service now due to covid restrictions. We needed to order direct. The service was exceptionally great. Received tracking number right away. Since I ordered overnight delivery, the part came early next day and we are up and running! Read more
The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.
Symptoms of needing to replace the lower rack roller include:
Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Dishwasher won't drain or water stays in the tub? A failed drain pump is often the cause. This repair involves removing the dishwasher for access.
Removed two securing screws from side of dishwasher. Pulled out of cabinet careful to not over extend supply/drain/electric connections. Layed unit on side, removed two clamps from each end of drain pump as well as one electrical connection, removed bad pump, replaced connections and clamps, electrical connection. Ran a cycle while out of cabinet to ensure no leaks, replaced unit and screwed back into cabinet. Whole thing took 20 minutes. Read more
Dishwasher not filling with water or filling too slowly? The water inlet valve controls water flow into the tub. DIY-friendly repair with video guide.
I figured it was the valve, but searching on the Appliance Parts site, somebody said they fixed it by replacing the switch flood assembly. So I order both parts. The Switch Flood Assembly was easiest to replace, so I decided to try that first. When I pulled out the old assembly, I noticed it did not 'rattle', as the new one did. So, there is apparently a float ball that had gotten stuck. I put the new one in and poof.. it worked. The only update to the instructions is a reminder that the... Read more
The Electronic Control Board is an OEM replacement part for GE dishwashers. This component acts as the command center, managing the various functions and cycles of the dishwasher, such as washing, rinsing, and drying. The control board processes user inputs and ensures that the dishwasher operates efficiently and effectively, coordinating all the internal systems to perform the selected wash programs.
Causes of a bad electronic control board can include electrical surges, moisture damage, or general wear and tear over time. Additionally, manufacturing defects or issues within the dishwasher’s electrical system can lead to failures in the board’s circuitry, disrupting the appliance's functionality.
Symptoms of a bad electronic control board include:
Fix went fine, had to pull the dishwasher out to replace flood switch control board was very easy to replace, and fixed the problem. Read more
Dishwasher detergent dispenser won't open or latch? This module controls soap release during wash cycles. Moderate DIY repair—30 minutes, door removal.
Tried CLR to remove hard water deposits. That did not help. Ordered new dispenser. The GE series that the detergent module fits in was a little difficult to open. Finally found a video explaining the whole door had to come off in order to open it up to replace the module. Works great now. Read more
Replacement silverware basket for dishwasher lower rack. Holds and organizes utensils during wash cycles. Order if your basket is cracked or broken.
Replaced Side blaster Read more
Upper dishrack rail for dishwashers. Allows the top rack to slide in and out smoothly. Replace if cracked, broken, or bearings are worn or missing.
Replaced the upper rack inner rail assembly. Read more
Replacement door cable and spring kit for dishwashers. Installs on door hinge to provide proper tension and balance. Needed when cables break or springs wear out.
Replaced broken part. Read more