Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Removes chlorine, lead, and mercury for clean, fresh-tasting water. Replace every 6 months or when flow decreases. Confirm fit with your model number.
I called your company with the serial number of the fridge, and had the best service locating the exact items i needed. I placed by order . and company called to confirm my order and the method of my payment. Thank you very much Read more
Fix a refrigerator that stopped making ice with this ice maker assembly. Common repair for no ice production. Easy 15-20 minute DIY installation.
Tl;dr: Watch the repair video FIRST. This will take you less than 15m if you do watch the video. You need to remove a door panel, you can't directly replace the icemaker. Even without doing that, it took me less than 30 minutes. 4 screws, a panel removal, a couple of computer-style power plugs, and you'll have ice again no problem. Stupid easy. Initially, we did the button reset on the old icemaker, and it didn't beep or anything, so that was enough troubleshooting for me to replace the... Read more
Replaces broken or missing handle mounting stud that secures refrigerator door handles. Installs into door to hold handle firmly in place.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
Freezer not cooling or fridge showing fan error? Your evaporator fan motor may have failed. This motor circulates cold air throughout your refrigerator.
The blower motor that circulates air through the refrigerator was broken. I had to remove all the shelving and drawers from the refrigerator. Then I had to remove the plastic light cover from the center of the fridge. Then I removed all visible screws to uncover the evaporator/radiator. I then unplugged the light bulb and motor wires. Luckily all wiring is keyed so that it can be plugged in again without error. I removed the motor by opening the motor housing. The housing has 1 screw and... Read more
Replaces cracked or clogged drain cap assembly in refrigerator compartment. Installs behind rear wall to prevent water buildup under crisper drawer.
Found one of the drain valves was clogged causing condensation to overflow on the floor behind the refrigerator. Order the parts on Monday morning and they arrived tuesday afternoon. Replace both of the valves in 15 minutes. Easy repair and save a bundle over a service call. Read more
Freezer won't cool below 50°F or has frost buildup? This defrost sensor regulates temperature readings. Moderate DIY repair for most home models.
Sensor near coils replaced did not need anything else. Read more
Ice maker stopped working or water dispenser won't stop? A faulty water inlet valve often causes these issues. Simple 15-20 minute DIY repair with video help.
The repair job took me less than 15 minutes. I removed the lower back panel from the back of the fridge then disconnected the power to the fridge and turned off the water supply to the fridge. I then looked closely at how the water valve 2-way was installed and removed it. Then I connected the water supply lines for the water and ice then connected the water valve line and I was done. It was that simple. Saved an appliance service call of about $100. and did the job myself. Read more
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
Replace your broken or cracked refrigerator vegetable drawer assembly. This crisper drawer installs in the lower fresh food compartment for organized produce storage.
Actually, my 11 year old daughter just removed the old shelves and installed the new ones after wiping the fridge down. Prices were cheaper than I could find on Amazon for the same parts. Everything is now honky dory. Moral of the story - don't store a lots of bottled water in your crispers - they won't take the weight :) Read more
Fridge not cooling but freezer works? This evaporator fan motor restores cold air circulation. Common DIY repair with video guide included.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more
Connects your refrigerator to the wall outlet. Replace if the cord is severed, the plug prongs are broken, or the ground terminal is damaged or missing.
I started by replacing the water filter assembly since it was leaking after I attempted to install a non-name-brand filter. The new assembly didn't fix the problem (but was hard to find, and AppliancePartsPros was amazing in being able to get one). Further, while replacing that I noticed that the previous owner had literally cut out the grounding pin from the power cord. I decided to replace the power cord and the Ice Maker Assembly. None of the online stores seemed to have either part listed... Read more
Replacement axle pin that secures roller wheels to the refrigerator base. Needed when original pin is damaged, corroded, or broken during wheel replacement.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Fix a refrigerator that won't cool or runs warm. This condenser fan motor assembly replaces failed motors causing cooling problems. DIY-friendly repair.
Replaced the condenser fan. Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.