Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
If your pulsator cap broke and you found it in the wash, replace it immediately to prevent clothing damage. Simple 30-second snap-in installation.
Ordered one from you guys, took about 30 seconds to fix. Snapped it in place and was ready to go!!! Read more
Fix a washer that won't fill, overfills, or leaks water when off. This water inlet valve controls flow into the drum. DIY repair in 15-20 minutes.
Researched error code and symptoms on Internet. Disassembled washer back to get right part #, be careful they are different! Googled part # for OEM part, found AppliancePartsPros with competitive pricing and fast delivery, placed order on Wednesday, had it on Friday for a few bucks more. Got the part as expected, replaced, tested and success! No error code, fast wash cycle, happy better half! Read more
Washer won't drain or draining slowly? A failed drain pump prevents water removal during cycles. Moderate DIY repair with video guide available.
I opened the washer and replaced the pump. To open the washer: 1. Remove the 2 screws that are different from the others in the top back corners of the machine. That will let you remove the top. 2. Remove the soap tray and its holder. The tray comes out if you depress the tab in the back center. Its holder comes out if you remove the two screws in the front. You can leave all the hoses attached. 3. Remove the control panel. It snaps in. Undo the top snaps first. You'll have to reach... Read more
Fix 3E error codes or spinning issues with a rotor position sensor replacement. Detects motor position for smooth wash cycles. 15-minute DIY repair.
I watched the you tube video that completely explained how to do it. It was very easy to do. Read more
Fix washer unbalanced loads and UB error codes with this damper assembly. Absorbs vibrations during spin cycles. Easy 30-minute DIY repair, no special tools.
Purchased 4 Damper Rod Assemblies and replaced the factory units. Read more
Replace your broken or missing dryer control knob encoder assembly. This dial installs on the control panel to adjust cycle settings and temperatures.
Ordered a new knob and took out little bits of the old one. Took the new knob and pressed it over the stump and presto works like new. Read more
Fixes loud banging noise and excessive vibration during spin cycle. Secures counterbalance weight to prevent dancing and movement. DIY-friendly repair.
Needed to replace washer counter balance. Also order shock absorbers in case they needed to be replaced, fortunately they didn't need replacement and will be returned. I used Appliance Parts Pros many time and always found them to be very helpful and the repair videos are very helpful. Read more
Washer won't start or shows LO/DC error? Lid lock assembly secures the lid during cycles and signals the control board. DIY-friendly repair with video.
After watching the video it was strait forward. Just Pull the screws pop the lid swap the springs "grease them" and put it back together. I would suggest that you have a person help you mostly has a second pair of hands. The lid was over rear springs and it will save you some expletives to have the extra body. I had worn out springs and the load kept becoming unbalanced during spin cycles I just happened to coincide with the Lock mechanism failing. The motor drive for the lock stopped working.... Read more
Adjustable leveling leg installs on the bottom of your washer. Replace if broken, cracked, or snapped off. Allows height adjustment for stability.
Ordered a new leg from Appliance Parts & put it on. Read more
Fix tE error codes with a new water temperature thermistor. This sensor monitors wash water temp. DIY-friendly repair takes under 10 minutes.
I first check the schematics to find the heat sensor. On my model it's c on the control panel. I checked the continuity on the orange and white wires. It showed some continuity but not much. I then went to the heater element and found the orange and white wires going to the thermistor. Turns out the heater element and thermistor need repalced. Read more
If your washer won't complete the spin cycle or shows an 8E2 error, this vibration sensor may be faulty. Easy 15-minute DIY repair—just tip it back.
Bought the new sensor. Tipped the washing machine on its back which made the sensor easy to access. Remove two screws unplug the sensor replaced it screwed it back in and I was done. 15 minute repair with a $50 part. To have the repair person even come to the house would have been $80 plus parts and labor evidentially a second visit. The repair was simple and quick and I would read it as a begin her handyman job. Read more
Washer not draining or water backing up? This check valve regulates water flow and prevents backflow. DIY repair with video guide included.
First of all, I cannot believe that Samsung would actually think that putting the drain pump on the drum was a GOOD idea. The fix was easy, When I bought the washer off an individual, She told me that she was informed the drain pump needed replaced. So I did that. Pain in the a&* du to the location and trying to secure the bolts. It broke off after a week. I found out that Samsung put out a repair bulletin and a customer service rep from this site emailed it to me. After looking up the parts,... Read more
Fix washer overfilling or not filling properly. This water level pressure switch regulates water in the tub. Easy DIY repair for OC error codes.
Replaced water level sensor on washing machine. Read more
Replace a bent or missing pulsator bolt that prevents proper agitator assembly. This washer bolt secures the pulsator mechanism for smooth operation.
Ordered a new part and installed Read more
Self-tapping screw for dishwashers, dryers, refrigerators, and washers. Replace missing, stripped, or damaged screws for secure panel and component mounting.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Leaking washer or water pooling inside? This tub to pump drain hose prevents water buildup and drainage issues. Simple DIY replacement fix.
Killed the mice, patched their hole and ordered a new part. Installed was simple as it was a perfect fit. Read more