Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the handle end cap to the center of your refrigerator door. Replace if missing, stripped, or lost during handle repairs. 8-18 x 1/2 inch size.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Secures washing machine hoses to prevent leaks in the water system. Replace if damaged, corroded, or connections are loose. Verify fit by part number.
We ordered parts from appliance parts pros and I fixed it. Read more
Fastening screw for securing washer components like panels, brackets, and hinges. Replace when stripped, corroded, or missing during repairs.
Removed the screws, lifted the old lid out of the hinges. Replaced the hinges, set new lid in the hinges and replaced screws. Read more
Washer leaking water or not draining? This tub to drain pump hose transports water during the drain cycle. Quick 15-minute repair with video guide.
APPLIANCE PARTS PROS HELPED ME AND GUIDED ME FOR THE PARTS. PROBLEM FIXED. Read more
Carries wastewater from washer pump to household drain. Replace if cracked, leaking, clogged, or damaged to restore proper drainage and prevent puddles.
Replaced the drain pump and the drain hose (since I was replacing the drain pump). The new drain pump seems to pump out the water more forcefully than the one replaced. Have not received a LD code during the wash cycle since the replacement was installed. Read more
Fixes F51 error code and washer won't spin or agitate issues. Direct-drive stator replacement takes 30-60 minutes with video guidance.
Once you tilt the washer and prop it against something it's a pretty straight forward and easy fix. If you watch the instructional "How-to" video beforehand, the repair should take between 30 to 60 minutes. It all depends on your skill level and if everything goes smoothly. Make sure you have all the proper tools, grease and blue thread lock at the ready to help you move this repair along faster. This repair was in conjunction with replacing the motor position sensor. I didn't know I needed a... Read more
Washer overfilling or not filling properly? A damaged pressure switch hose prevents accurate water level sensing. Easy 15-minute DIY fix with video.
I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more
Secures the washer lid to the hinge assembly. Replace if stripped, rusted, or missing. Essential for proper lid alignment and secure closure during use.
I just replaced the glass lid and broken plastic frame with the all metal one. Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016): 1 lid part number WP8572026 (AP6013408) for $119.81 2 hinges WP8563964 (AP6004844) for $6.17 each 4 screws WPW10119828 (AP6015313) for $1.97 each Total $140.03 plus $8.95 shipping, grand total $148.98 Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The... Read more
Fix washer not filling, slow fill, or water leaks with this water inlet valve assembly. Moderate DIY repair, typically takes 30-60 minutes to install.
I replaced the water inlet valve assembly. We have relatively hard water and I assumed that over the years those inlet valves were clogged with calcium deposits which in turn led to the high pitched squealing as water was added to the machine. The hardest part of the entire job was releasing the top of the washer to disconnect the hoses from the valve assembly. Everything else was relatively easy. We simply followed the online video. My washer no longer screams and I'm thrilled! Your... Read more
Fix water leaking from under your washer with this tub to circulation pump hose. Connects the tub to the pump during wash cycles. DIY repair in under 1 hour.
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
I put all pieces that I ordered on the dryer and plugged it in. Read more
Rubber inlet hose that connects your washer to the water supply. Replace if cracked, leaking, or worn. Standard 5-foot length with included washers.
Replaced flow meter and control valve Read more
If your washer agitator won't engage or spins weakly, these cam rollers may be worn. Kit includes 4 rollers. Easy DIY repair for most home mechanics.
A buddy of mine gave me a washer and said if you can fix it you can have it, It doesn't spin. I tried running a spin cycle and found that it did try to spin but was very noisy. I disassembled the washing machine and found that the tub seal had gone out and took out the bearings with it so I ordered a new tub and seal kit and while I waited for that I proceeded to disassemble the rest of the washing machine and clean everything so when the new parts arrived it was ready and waiting. Bearing... Read more
Secures baffles to the dryer drum interior. Replace worn, stripped, or missing screws to keep baffles firmly attached and prevent rattling during operation.
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles. Read more
Replacement screw for washers. Used to secure various components including handles, panels, and internal parts. Order if original is missing or stripped.
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap... Read more
Fix washer leaking or puddling on the floor with a new water nozzle assembly. Stops dripping, misdirected spray, and restores proper water flow.
Watched video on your website to determine how to raise lid and found the part that was leaking. I was able to order the part directly from schematic and it arrived in a couple of days. Easy to install after watching the video. Read more