Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
No water or ice from dispenser? Leaking water? This water inlet valve controls water flow to your dispenser and ice maker. DIY-friendly, 10-15 min install.
I have a Samsung fridge and I had a problem were low pressure water kept coming out of the dispenser and would not stop. At first I thought it was the dispenser switch until I read reviews on the App Pro sight and the issue pointed to the water valve. I ordered the part from App Pro (very quick delivery) installed the new water valve in 15 minutes. Turned water back on plugged fridge back in wall and problem solved. Water dispenser working normally. (part DA62-00914B) Read more
Replacement cap for French door refrigerator center hinge assembly. Covers hinge mechanism on door frame. Needed when original is cracked or broken.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Replacement axle pin that secures roller wheels to the refrigerator base. Needed when original pin is damaged, corroded, or broken during wheel replacement.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Plastic grommet that cushions the hinge pin on refrigerator doors. Replace if cracked, worn, missing, or causing door alignment issues.
I removed the door and the hinge assembly from the right side; it turns out the grommet had never been installed and this is what was causing the door to grind down the metal hinge. It was remarkably easy to replace and my door is working perfectly! Read more
Freezer icing up or water leaking into crispers? This defrost heater melts frost from evaporator coils. Moderate DIY repair with video guide included.
Ordered parts, defrosted refrigerator, and replaced with new items. This problem has been going on quite some time, while Samsung refused to acknowledge the defective unit, claiming it was owner fault. The defrosting had to be completed every 3-4 months and managed in time to require defrosting every few days. Originally a repairman came and although he defrosted it the first time, he informed us, this is quite common and the unit is defective by design; which is why we continued to defrost on... Read more
Ice maker overflowing or not making ice? A faulty water inlet valve often causes these issues. Easy 5-minute DIY repair saves hundreds on service calls.
Verified that the water line had flowing water, check. Removed lower screen and vacuumed and cleaned all dust. Proceeded to test water flow to the valve and beyond the valve. The valve did not allow water to pass through it. Nor would it open or close. Went to Marbeck for confirmation and was sent to your website for the part. Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Replaces a cracked, broken, or missing water dispenser cover assembly on your refrigerator. Snaps into place over the dispenser area to restore appearance.
I read an article concerning the same problem and ordered the interior lever, but the real issue was that the plastic piece that activated the water flow was broken off the interior of the water dispenser cover assembly. I popped out the dispenser cover (it is on very snugly) and replaced it with a new one (again, it went back on but with some force needed). I only needed a screwdriver to pop the cover and would suggest you use a towel as a buffer to prevent scratching the interior of the... Read more
Fridge won't start after power outage? This compressor start relay enables your refrigerator motor to start smoothly. DIY-friendly fix for no cooling.
Replaced relay and worked perfectly. Thanks for the fast service. Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Secures the glass panel over your refrigerator's crisper drawers. Replace if cracked, broken, or missing to restore proper shelf support and appearance.
Order a new fixer Read more
Spring component that provides tension for the freezer door handle mechanism. Replace if spring is broken, missing, or no longer holding proper tension.
I looked at the blow up drawing to figure out what parts I might need. I then watched a you tube video to see how to take the handle off. I kind of figured out on my own how to remove the ruined cap handle. It took me a few minutes to figure it out and more time to remove both the handle and the broken part. Turns out I did not need the spring nor the shaft cap handle. Very proud of myself. Saved a huge amount of money. Only problem was that I could only put in one screw as the previous... Read more
Replaces cracked or broken French door flapper assembly on bottom-mount refrigerators. Includes mullion heater. Installs between doors with 2 screws.
Unscrewed old flap. Then unplugged it. Plugged in new flap ( make sure it is right side up). Screw both hinges back, and voilà, fridge fixed! Read more
Plastic frame and glass cover assembly that sits above crisper drawers. Replace if cracked, broken, or missing to properly support produce bins.
At first, I contacted the number listed in the manual to order the part, the customer service person was no help after 30 minutes of trying to explain what part I needed I think she got it, but then told me it would take 5-10 business days to get it, and they could not ship any faster. So, I cancelled the order and while I was on hold for her I searched the internet and was able to find your website called you had a diagram of the part I needed and it was shipped out the same day and I got it... Read more
Replaces cracked, broken, or scratched pantry drawer cover on your refrigerator. Includes clear plastic viewing window and white frame. Clips into place.
Replaced original parts- Only skill needed was finding plastic push tabs. No tools required. Most of time was used for removing food from refrigerator before looking for tabs. Read more
Replacement rail assembly for refrigerator vegetable drawers. Installs on the side wall to support drawer gliding. Needed when original is cracked or broken.
Removed the bottom shelf by releasing the 2 clips near the water filter, then lifted the front of the shelf and slid it out. Removed 2 screws from the broken Vegetable Rail and replaced it with the new one. Slid the shelf back into place and locked it down into the clips. Done. Took longer to remove everything from the shelf than it did to fix it. Less than 5 minute repair. Read more